printlogo
http://www.inspire.ethz.ch/index_EN
Willkommen auf der Homepage des IWF
 
print
  
Deutsch English

Lectures Autumn Period

Offer

Lectures overview autumn 2019 (only in german)
acrobat
pdf File
werkstoff2
Engineering Materials and Production I

Lecture:

The lecture covers the structure and the properties of metallic materials. In the focus are the branches: microscopic structure and thermally activated processes e.g. diffusion, plastic deformation, recovery, recrystallisation as well as solidification. Generally the lecture also refers to manufacturing, to the processing, and application of the concerning materials.

K. Wegener
M. Gerstgrasser
J. Engel
     
fertigungstechnik2
Manufacturing I

Lecture:

Deeper insight in manufacturing processes: drilling, grinding, honing, lapping, electro erosion and electrochemical machining. Stability of processes, process chains and process choice.

K. Wegener
F. Kuster
     
produktionsmaschinen1
Production Machines II

Lecture:

Control- and NC-technique, flexibility, rationalization and automation, modern machine concepts

K. Wegener
F. Kuster
J. Mayr
S. Weikert
O. Zirn
     
elektronikfertigung-s
Manufacturing of Electronic Components

Lecture:

Nothing works without electronics! Typical products in mechanical engineering such as machine tools, as well as any kind of vehicle contain a significant amount of electric or electronic components of more than 60%. Thus, it is important to master the value added process sequence for electric and electronic components.
The lecture starts with a brief introduction of electronic components and the planning of integrated circuits. Next, an overview will be provided about electronic functional units assembled from these electronic components, on printed circuit boards as well as in hybrid technology. Value added process steps are shown as well as their quality check and their combination for planning a complete manufacturing line. The lecture further describes the manufacturing of integrated circuits, starting from the wafer via the structuring and bonding to the packaging. As an example, the manufacturing of micro-electromechanic and electro-optical systems and actuators is described. Due to similar processes in the electronic production, the value added process sequence for photovoltaics will described too.
The lecture concludes with an excursion to a large manufacturing company. Here, students can the see the application and realization of the manufacturing of electric and electronic devices.

R. Moryson
A. Guber
A. Kunz
F. Reichert
T. Widmer
E. Skell
     
wahlfach-fertigungstechnik
Quality of Machine Tools - Dynamics and Metrology at Micro and Submicro Level

Lecture:

The course "Machine tool metrolgy" deals with the principal design of machine tools, their spindles and linear axes, with possible geometric, kinematic, thermal and dynamic errrors of machine tools and testing these errors, with the influence of errors on the workpiece (error budgeting), with testing of drives and numerical control, as well as with checking the machine tool capability.

A. Günther
F. Kuster
S. Weikert
     
Oberflache-s
Mechanical Production: Assembly, Joining, and Coating Technology

Lecture:

Understanding of the complexity of the assembly process as well as its meaning as success and cost factor. The assembly with the different aspects of adding, moving, adjusting, controling parts etc.. Adding techniques; solvable and unsolvable connections. Assembly plants. Coating techniques and their tasks, in particular corrosion protection.

F. Kuster
V. Derflinger
P. Jousset
F. Durand
J. Herrgott
M. Santoro
     
BetrieblicheSIM-s
Operational Simulation of Production Lines

Lecture:

The students learn the usage of the event-driven Simulation for layout and operational optimisation of production lines by means of practical examples.

P. Acél
M. Fabbri
     
VR2
Visualization, Simulation and Interaction - Virtual Reality II

Lecture:

Introduction of Virtual Reality and its definition; Basics of Augmented Reality; Interaction with digital data; Basics of simulation; Compression of image- and video data; Compression of audio data; New materials for addressing force feedback devices; Data security; Introduction into cryptography; Definition of geometry for free-form surfaces; Digital factory; New research fields in Virtual Reality.

A. Kunz
     
ecodesign-s
Environmental Management

Lecture:

An environmental management system has the objective to continuously improve the environmental performance of the activities, products and services of a company. The company has to introduce different management procedures. The goal of this lecture is to provide basics and specific procedure to implement the environmental dimension in the planning and decision making processes of an organisation.

R. Züst

Fertigungstechnisches Kolloquium

Infos only in german (link)

Engineering Tool Courses IV

Introduction to CAM and Motion Simulation
Contents:
Introduction of integrated CAD applications CAM (Computer Aided Manufacturing), Motion Simulation (Kinematics)
M. Schmid
   
Experimental modal analysis

Contents: Page only in german (click on the link above)

F. Kuster
   
Modellbildung und Antriebsinbetriebnahme von WZM
Contents: Page only in german (click on the link above)
O. Zirn
   
Introduction to the Methods of Six Sigma Quality Control and Lean Production
Contents:
The course introduces to Six Sigma quality management and quality improvement, which aims to reduce process variation and to sustain process capability. It introduces also to the Lean production principles, aiming to reduce waste within the processes as well as aiming to a customer taked pullproduction.
B. Rüttimann
   
Systems Engineering für Projekt- und Studienarbeiten

Contents: Page only in german (click on the link above)

R. Züst

Labs

Netzbasierte Zusammenarbeit

Contents: Page only in german (click on the link above)

A. Nguyen
   
Schnell und genau im Vorrichtungsbau – Werkstückmesstechnik

Contents: Page only in german (click on the link above)

N. Lanz
   
Vom Konzept zum gefrästen Produkt
Contents: Page only in german (click on the link above)
S. Wigger
   
Experimentelle Zerspanversuche am Drehprozess
Contents: Page only in german (click on the link above)
S. Süssmaier

Focus projects (info only in german)

 

Wichtiger Hinweis:
Diese Website wird in älteren Versionen von Netscape ohne graphische Elemente dargestellt. Die Funktionalität der Website ist aber trotzdem gewährleistet. Wenn Sie diese Website regelmässig benutzen, empfehlen wir Ihnen, auf Ihrem Computer einen aktuellen Browser zu installieren. Weitere Informationen finden Sie auf
folgender Seite.

Important Note:
The content in this site is accessible to any browser or Internet device, however, some graphics will display correctly only in the newer versions of Netscape. To get the most out of our site we suggest you upgrade to a newer browser.
More information

© 2019 ETH Zurich | 25 September 2019
top