ETH - IWF: Publikationen

I. Dey, S. Egorov, F. Soffel, K. Wegener, Model-based Heat Input Control Validated on Martensitic Steel 1.4313, International Conference on Materials Sciences and Nanomaterials 2023, 2023, Cambridge, Vereinigtes Königreich, [BibTeX][Abstract]
V. Gorobets, E. Andreopoulos, A. Kunz, Automatic Transcription of the Basic MTM-2 Motions in Virtual Reality, Smart Service Summit 2023, 2023, Zurich, Schweiz, [BibTeX][Abstract][Paper]
H. Freisse, D. Keller, T. Schudeleit, Laser Material Processing for the Production of Bronze Coatings for Tribological Applications, AGMA FTM, 2023, USA, [BibTeX]
M. Lutfallah, T. Gini, C. Hirt, K. Caplazi, A. Kunz, Remote Cross-platform Instructions between MR and VR, International Conference on Cyberworlds, 2023, Soussa, Tunesien, DOI 10.1109/CW58918.2023.00045, Seiten 256--259, [BibTeX][Abstract][Paper]
R. Weber, A. Spierings, K. Wegener, Investigation of the Feasibility to Process NiTi Alloys with Powder Bed Fusion for Potential Applications, International Conference on Additive Manufacturing in Products and Applications, 2023, Zurich, Schweiz, DOI 10.1007/978-3-031-42983-5_16, Seiten 225--236, [BibTeX][Abstract][Paper]
M. Lutfallah, C. Hirt, V. Gorobets, M. Gregor, A. Kunz, Redirected Walking in Overlapping Rooms, Siggraph 2023, 2023, Los Angeles, USA, DOI 10.1145/3588028.3603672, Seiten Article No. 21, [BibTeX][Abstract][Paper]
V. Ostad Ali Akbari, M. Kuffa, K. Wegener, Bayesian deep transfer learning for refinement of stability predictions in milling, The 5th International Conference on Advances in Signal Processing and Artificial Intelligence, 2023, Spanien, [BibTeX][Abstract]
N. Zhang, H. Klippel, F. Kneubühler, M. Afrasiabi, M. Röthlin, M. Kuffa, M. Bambach, K. Wegener, Study on the effect of wear models in tool wear simulation using hybrid SPH-FEM method, 19th CIRP Conference on Modeling of Machining Operations, 2023, Karlsruhe, DOI 10.1016/j.procir.2023.03.070, [BibTeX][Paper]
E. Öztürk, F. Stoop, B. Ott, J. Mayr, K. Wegener, Determination of remaining useful life through fusion of physical and data-driven modelling, International Conference Math 2 Product, 2023, Taormina, Italien, [BibTeX][Abstract]
U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, A Novel Approach to In Situ Coating Thickness Measurements in Thermal Spraying, International Thermal Spray Conference 2023, 2023, DOI 10.31399/asm.cp.itsc2023p0142, [BibTeX]
J. Gisler, D. Dedic, V. Holzwarth, A. Kunz, Effects of Attention Guidance on Virtual Reality Training for an Industrial Assembly Task, 9th International Conference of the Immersive Learning Research Network, 2023, San Luis Obispo, USA, DOI 10.56198/ZH3JOA4QX, [BibTeX][Abstract][Paper][Slides][Video]
H. Klippel, N. Zhang, M. Kuffa, M. Afrasiabi, M. Bambach, K. Wegener, iMFREE: A versatile software tool for modelling machining processes with particle methods, Procedia CIRP, 2023, DOI 10.1016/j.procir.2023.03.004, [BibTeX][Abstract]
M. Lutfallah, DC_Maximizing Natural Walking in Virtual Environments, IEEE Conference on Virtual Reality and 3D User Interfaces, 2023, Shang Hai, China, DOI 10.1109/VRW58643.2023.00337, Seiten 989--990, [BibTeX][Abstract][Paper][Slides]
L. Walker, J. Gisler, K. Caplazi, V. Holzwarth, C. Hirt, A. Kunz, Comparing Mixed Reality Hand Gestures to Artificial Instruction Means for Small Target Objects, Proceedings of Eighth International Congress on Information and Communication Technology, 2023, London, Vereinigtes Königreich, ISBN 978-981-99-3242-9, DOI 10.1007/978-981-99-3243-6_62, Band Lecture Notes in Networks and Systems, Nr. 693, Seiten 781--790, [BibTeX][Abstract][Paper]
M. Fabbri, K. Wegener, Preliminary investigation of a fast temperature prediction approach for simple thin-walled parts produced with Wire Arc Additive Manufacturing., CIRP ISEM XXI, 2022, [BibTeX]
A. Gharaei, T. Wahl, V. Ostad Ali Akbari, M. Kuffa, K. Wegener, Grinding Wheel Condition Monitoring using Acoustic Airborne Signals and Machine Learning, The 19th International Conference on Precision Engineering, 2022, Nara, Japan, [BibTeX][Abstract]
T. Wahl, A. Gharaei, T. Thalmann, M. Kuffa, K. Wegener, Automated Detection of Visible Grinding Burn in Rail Grinding using Cameras and Machine Learning, The 19th International Conference on Precision Engineering, 2022, Nara, Japan, [BibTeX]
N. Zimmermann, S. Lang, J. Mayr, K. Wegener, The impact of self-learning thermal error compensation models on the accuracy of 4-axis thermal test pieces, The 19th International Conference on Precision Engineering, 2022, Nara, Japan, [BibTeX]
V. Ostad Ali Akbari, Y. Mohammadi, A. Gharaei, M. Kuffa, K. Wegener, Optimal selection of tool-holder combination for enhanced stability boundaries in milling, The 19th International Conference on Precision Engineering, 2022, Nara, Japan, [BibTeX][Abstract]
P. Kaftan, J. Mayr, K. Wegener, Thermal Compensation of a Swiss-type Lathe, The 19th International Conference on Precision Engineering, 2022, Nara, Japan, [BibTeX][Abstract]
S. Egorov, F. Soffel, K. Wegener, Investigation of the layer height stability in multi-axis DMD process, The 19th International Conference on Precision Engineering, 2022, Nara, Japan, [BibTeX][Abstract][Paper]
K. Wegener, L. Weiss, J. Mayr, T. Gittler, Konnektivität von Maschinen, Lernen und Intelligenz, Zerspanungsforum Tuttlingen, 2022, Tuttlingen, Deutschland, [BibTeX]
C. Hirt, M. Ketzel, P. Graf, C. Holz, A. Kunz, Short-term Path Prediction for Spontaneous Human Locomotion in Arbitrary Virtual Spaces, 21st IEEE International Symposium on Mixed and Augmented Reality, 2022, Singapur, Singapur, DOI 10.1109/ISMAR-Adjunct57072.2022.00116, Seiten 554-559, [BibTeX][Abstract][Paper]
F. vandenOever, V. Gorobets, B. Sætrevik, M. Fjeld, A. Kunz, Comparing Visual Search between Physical Environments and VR, 21st IEEE International Symposium on Mixed and Augmented Reality, 2022, Singapore, Singapur, DOI 10.1109/ISMAR-Adjunct57072.2022.00089, Seiten 411--416, [BibTeX][Abstract][Paper]
K. Wegener, J. Mayr, N. Zimmermann, P. Kaftan, Intelligent thermal compensation of machine tools, Wiener Produktionstechnik Kongress 2022, 2022, Wien, Österreich, [BibTeX]
F. Stoop, J. Mayr, K. Wegener, Characterization of Aerodynamic Effects and Unbalance in Rotor Dynamics Whirl Orbit, American Society for Precision Engineering 2022 Annual Meeting, 2022, Bellevue, Washington, USA, ISBN 978-1-887706-56-8, DOI https://doi.org/10.3929/ethz-b-000575884, Band 78, Seiten 361--365, [BibTeX][Abstract][Paper]
P. Borges Esteves, M. Kuffa, K. Wegener, S. Maria, Single crater dimensions and wire diameter influence on Wire-EDM, 21st CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, 2022, Zürich, Schweiz, DOI DOI: 10.1016/j.procir.2022.09.151, Band Procedia CIRP 113, Seiten 232–237, [BibTeX][Abstract][Paper]
U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, Effect of particle size distribution width on repeatability of coating characteristics in atmospheric plasma spraying, 21st CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, 2022, Schweiz, DOI 10.1016/j.procir.2022.09.180, [BibTeX]
I. Dey, M. Gerstgrasser, K. Wegener, CA single track simulation of laser conduction welding with stainless steel 316L (1.4404), CIRP ISEM XXI, 2022, Zürich, Schweiz, DOI https://doi.org/10.1016/j.procir.2022.09.163, [BibTeX][Abstract]
A. Gharaei, T. Wahl, M. Kuffa, K. Wegener, Vorhersage der Werkstück-Oberflächenrauheit beim Hochleistungs-Trockenschleifen mittels Simulation, Schweizer Schleif-Symposium, 2022, 2022, Zürich, Schweiz, DOI https://doi.org/10.3929/ethz-b-000604807, [BibTeX][Abstract]
N. Zimmermann, J. Mayr, K. Wegener, An action-oriented teaching approach for intelligent and energy efficient precision manufacturing, 50th SME North American Manufacturing Research Conference, 2022, West Lafayette, USA, [BibTeX][Abstract]
A. Gharaei, F. Mauz, A. Andres, Pre-Grinding Surface Defect Identification using Supervised Machine-Learning and Laser Triangulation Data, The Fifth International Conference on Railway Technology: Research, Development and Maintenance, 2022, Montpellier, Frankreich, DOI 10.4203/ccc.1.10.19, [BibTeX][Abstract]
V. Gorobets, C. Merkle, A. Kunz, Pointing, Pairing and Grouping Gesture Recognition in Virtual Reality, ICCHP Conference on Computers Helping People with Special Needs, 2022, Lecco, Italien, ISBN 978-3-031-08648-9, DOI 10.1007/978-3-031-08648-9_36, Band Lecture Notes in Computer Science, Nr. 13341, Seiten 313--320, [BibTeX][Abstract][Paper]
M. Lutfallah, B. Käch, C. Hirt, A. Kunz, Emotion Recognition - A tool to improve meeting experience for visually impaired, ICCHP Conference on Computers Helping People with Special Needs, 2022, Lecco, Italien, ISBN 978-3-031-08648-9, DOI 10.1007/978-3-031-08648-9_35, Band Lecture Notes in Computer Science, Nr. 13341, Seiten 305--312, [BibTeX][Abstract][Paper]
A. Kunz, R. Koutny, K. Miesenberger, Accessibility of Co-Located Meetings - Introduction to the Special Thematic Session, ICCHP Conference on Computers Helping People with Special Needs, 2022, Lecco, Italien, ISBN 978-3-031-08648-9, DOI 10.1007/978-3-031-08648-9_33, Band Lecture Notes in Computer Science, Nr. 13341, Seiten 289--294, [BibTeX][Abstract][Paper]
D. Knüttel, S. Baraldo, A. Valente, K. Wegener, E. Carpanzano, Transfer learning of neural network based process models in Direct Metal Deposition, CMS 2022, 2022, Lugano, Schweiz, [BibTeX][Abstract]
D. Knüttel, S. Baraldo, A. Valente, E. Carpanzano, K. Wegener, Height prediction in Directed Metal Deposition with Artificial Neural Networks, ISEM XXI, 2022, Zürich, Schweiz, [BibTeX][Abstract]
F. Stoop, J. Mayr, K. Wegener, Aerostatic Stiffness and Damping Analysis for High-Speed Air Bearings in Ultra-Precision Machine Tools, euspen 22nd International Conference & Exhibition, 2022, Geneva, Schweiz, ISBN 978-1-9989991-1-8, DOI https://doi.org/10.3929/ethz-b-000552303, Seiten 157--160, [BibTeX][Paper]
N. Zimmermann, K. Jan-Marc, J. Mayr, K. Wegener, On-machine measurement cycle for the adaptive thermal error compensation of linear axes, euspen’s 22nd International Conference & Exhibition, 2022, Geneva, Schweiz, [BibTeX][Abstract]
U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, Importance of Evaluation Procedure of Particle State in Atmospheric Plasma Spraying, International Thermal Spray Conference 2022, 2022, DOI 10.31399/asm.cp.itsc2022p0868, [BibTeX]
U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, Analysis and Comparison of In Situ Coating Thickness Measurements Using Two Different Sensing Techniques, International Thermal Spray Conference 2022, 2022, DOI 10.31399/asm.cp.itsc2022p0240, [BibTeX]
S. Lang, N. Zimmermann, J. Mayr, M. Bambach, K. Wegener, Influences of metalworking fluid on the thermal errors of a 4-axis thermal test piece, Special Interest Group Meeting on Thermal Issues, 2022, Zürich, Schweiz, [BibTeX][Abstract][Paper]
N. Zimmermann, J. Mayr, K. Wegener, Statistical analysis of self-optimizing thermal error compensation models for machine tools, Special Interest Group Meeting on Thermal Issues 2022, 2022, Zürich, Schweiz, [BibTeX][Abstract]
P. Kaftan, J. Mayr, K. Wegener, Thermal Model of a Swiss-type Lathe, euspen Special Interest Group Meeting on Thermal Issues 2022, 2022, Zürich, Schweiz, [BibTeX][Abstract]
F. Stoop, J. Mayr, K. Wegener, Thermal Direct Oil Management of Power Electronics in Electric Mobility, euspen Special Interest Group Meeting: Thermal Issues, 2022, Zürich, Schweiz, DOI https://doi.org/10.3929/ethz-b-000539165, [BibTeX][Abstract][Paper]
C. Hirt, Y. Kompis, C. Holz, A. Kunz, The Chaotic Behavior of Redirection – Revisiting Simulations in Redirected Walking, IEEE Conference on Virtual Reality and 3D User Interfaces, 2022, Christchurch, Neuseeland, DOI 10.1109/VR51125.2022.00072, Seiten 524--533, [BibTeX][Abstract][Paper][Video]
C. Hirt, M. Ketzel, P. Graf, C. Holz, A. Kunz, Heuristic Short-term Path Prediction for Spontaneous Human Locomotion in Virtual Open Spaces, IEEE Conference on Virtual Reality and 3D User Interfaces, 2022, Christchurch, Neuseeland, DOI 10.1109/VRW55335.2022.00169, Seiten 636--637, [BibTeX][Abstract][Paper]
R. Roth, R. Weber, J. Zanolari, K. Ramadani, A. Spierings, M. Pavlica-Patigler, Parameter study on distortion during precision turning of additive manufactured half shells in Invar, CIRP Industrial Technical Paper, 2022, [BibTeX][Abstract][Paper]
A. Butzerin, N. Lanz, S. Weikert, K. Wegener, Parallel Kinematic Mechanism for Sub-Micron Accuracy Assembly Tasks, euspen Special Interest Group Meeting: Micro/Nano Manufacturing, 2021, [BibTeX]
P. Borges Esteves, M. Kuffa, K. Wegener, S. Maria, Influence of process variables on geometrical deviations in WEDM trim cuts, 26th International congress of mechanical engineering, 2021, Florianópolis, Brasilien, DOI doi://10.26678/ABCM.COBEM2021.COB2021-0800, [BibTeX][Abstract]
F. Soffel, S. Egorov, D. Keller, K. Wegener, CAD/CAM process chain for hybrid additive manufacturing, Progress in Digital and Physical Manufacturing, 2021, Leiria, Portugal, [BibTeX]
V. Holzwarth, C. Hirt, J. Gisler, A. Kunz, Virtual Reality Extension for Digital Twins of Machine Tools, Smart Services Summit 2021, 2021, Zurich, Schweiz, DOI 10.1007/978-3-030-97042-0_8, Seiten 77--84, [BibTeX][Abstract][Paper]
K. Wegener, F. Bleicher, U. Heisel, H. Hoffmeister, H. Möhring, Noise and vibrations in machine tools, CIRP Annals - Manufacturing Technology, 2021, DOI 10.1016/j.cirp.2021.05.010, Band 70, Nr. 2, Seiten 611--633, [BibTeX][Abstract][Paper]
N. Dhingra, G. Chogovadze, A. Kunz, Border-SegGCN: Improving Semantic Segmentation by Refining the Border Outline using Graph Convolutional Network, 2021 IEEE/CVF International Conference on Computer Vision Workshops, 2021, Virtual, Seiten 865--875, [BibTeX][Abstract][Paper]
E. Nonino, J. Gisler, V. Holzwarth, C. Hirt, A. Kunz, Subtle Attention Guidance for Real Walking in Virtual Environments, IEEE International Symposium on Mixed and Augmented Reality, 2021, Bari, Italien, DOI 10.1109/ISMAR-Adjunct54149.2021.00070, Seiten 320--325, [BibTeX][Abstract][Paper]
J. Gisler, J. Schneider, J. Handali, V. Holzwarth, C. Hirt, W. Fuhl, J. Brocke, A. Kunz, Indicators of Training Success in Virtual Reality Using Head and Eye Movements, IEEE International Symposium on Mixed and Augmented Reality, 2021, Bari, Italien, DOI 10.1109/ISMAR-Adjunct54149.2021.00064, Seiten 290--295, [BibTeX][Abstract][Paper]
F. Kneubühler, L. Seeholzer, M. Spahni, L. DiPierno, K. Wegener, Method for evaluating cooling strategies in terms of chip formation and transport in drilling CFRP/Al-stacks, SAMPE Europe Conference 2021 Baden/Zürich, 2021, ISBN 978-90-829101-3-1, [BibTeX][Paper]
L. Seeholzer, F. Kneubühler, C. Meier, K. Wegener, Efficient method for quality assessment in drilling CFRP based on digital images, SAMPE Europe Conference 2021 Baden/Zürich, 2021, ISBN 978-90-829101-3-1, [BibTeX][Paper]
D. Knüttel, S. Baraldo, A. Valente, K. Wegener, E. Carpanzano, Model based learning for efficient modelling of heat transfer dynamics, 18th CIRP Conference on Modeling of Machining Operations, 2021, DOI https://doi.org/10.1016/j.procir.2021.09.043, [BibTeX]
A. Spierings, M. Spurek, M. Lany, G. Santi, B. Revaz, K. Wegener, Direct part density inspection in laser powder bed fusion using eddy current testing, Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing, 2021, St.Gallen, Schweiz, Seiten 4, [BibTeX][Abstract][Paper]
F. Stoop, J. Mayr, C. Sulz, F. Bleicher, K. Wegener, Fleet learning of thermal error compensation in machine tools, International Conference on Emerging Technologies and Factory Automation, 2021, Västerås, Schweden, ISBN 978-1-7281-2989-1, DOI https://doi.org/10.1109/ETFA45728.2021.9613231, Seiten 1--4, [BibTeX][Abstract][Paper]
L. Seeholzer, M. Spahni, K. Wegener, Influence of different cooling strategies on the process temperatures and chip transport quality in one-shot drilling CFRP/Al-stacks, 9th CIRP Conference on High Performance Cutting (HPC) 2020, 2021, DOI https://doi.org/10.1016/j.procir.2020.12.005, Nr. 101, Seiten 310-313, [BibTeX][Abstract]
K. Ruhm, A short theory concerning the error process, XXIII IMEKO World Congress, 2021, Yokohama, Japan, DOI 10.1016/j.measen.2021.100353, Nr. 8, Seiten 100353, [BibTeX][Abstract][Paper]
S. Liechti, N. Dhingra, A. Kunz, Detection and Localisation of Pointing, Pairing and Grouping Gestures for Brainstorming Meeting Applications, 23rd International Conference on Human-Computer Interaction, 2021, Washington, USA, ISBN 978-3-030-78642-7, DOI 10.1007/978-3-030-78642-7_4, Seiten 22--29, [BibTeX][Abstract][Paper]
K. Le, Q. Tran, K. Chlasta, K. Krejtz, M. Fjeld, A. Kunz, VXSlate: Exploring Combination of Head Movements and Mobile Touch for Large Virtual Display Interaction, ACM Designing Interactive Systems, 2021, virtual, DOI 10.1145/3461778.3462076, Seiten 283--297, [BibTeX][Abstract][Paper][Video]
V. Holzwarth, S. Steiner, J. Schneider, B. vom, A. Kunz, BIM-enabled Issue and Progress Tracking Services using Mixed Reality, Smart Services Summit - Digital as an Enabler for Smart Services Business, 2021, online, Schweiz, ISBN 978-3-030-72089-6, DOI 10.1007/978-3-030-72090-2_5, Seiten 49--58, [BibTeX][Abstract][Paper]
N. Dhingra, F. Ritter, A. Kunz, BGT-Net: Bidirectional GRU Transformer Network for Scene Graph Generation, Computer Vision and Pattern Recognition, 2021, virtual, Seiten 2150 - 2159, [BibTeX][Abstract][Paper][Slides]
M. Buhmann, T. Liebrich, R. Roth, L. Gloor, K. Wegener, Alignment, calibration and data post‐processing for on‐machine metrology on ultra‐precision diamond turning machines, 21st International Conference of the European Society for Precision Engineering and Nanotechnology, 2021, [BibTeX]
M. Buhmann, E. Carelli, C. Egger, R. Roth, T. Liebrich, Investigation on probe positioning errors affecting on-machine measurements on ultra-precision turning machines, Procedia CIRP, 2021, DOI https://doi.org/10.1016/j.procir.2020.10.004, Nr. 101, Seiten 242--245, [BibTeX]
J. Gisler, V. Holzwarth, C. Hirt, A. Kunz, Work-in-Progress Paper: Enhancing Training in Virtual Reality with Hand Tracking and a Real Tool, 7th International Conference of the Immersive Learning Research Network, 2021, virtual, ISBN 978-1-7348995-2-8/21, DOI 10.23919/iLRN52045.2021.9459332, Seiten 244--246, [BibTeX][Abstract][Paper]
K. Le, T. Tran, K. Chlasta, K. Krejtz, M. Fjeld, A. Kunz, VXSlate: Combining Head Movement and Mobile Touch for Large Virtual Display Interaction, IEEE Virtual Reality, 2021, virtual, DOI 10.1109/VRW52623.2021.00146, Seiten 528--529, [BibTeX][Abstract][Paper][Video]
V. Holzwarth, J. Gisler, C. Hirt, A. Kunz, Comparing the Accuracy and Precision of SteamVR Tracking 2.0 and Oculus Quest 2 in a Room Scale Setup, 5th International Conference on Virtual and Augmented Reality Simulations, 2021, Melbourne, Australien, ISBN 978-1-4503-8932-7, DOI 10.1145/3463914.3463921, Seiten 42--46, [BibTeX][Abstract][Paper]
M. Afrasiabi, H. Klippel, M. Röthlin, K. Wegener, Parameter Identification of a Friction Model in Metal Cutting Simulations with GPU-Accelerated Meshfree Methods, World Congress on Computational Mechanics, 2021, Paris, Frankreich, Seiten 1--12, [BibTeX][Abstract][Paper]
K. Wegener, A. Spierings, A. Staub, Bioinspired intelligent SLM cell, 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2021, Gulf of Naples, Italien, DOI 10.1016/j.procir.2020.05.109, Band Procedia CIRP, Nr. 88, Seiten 624--629, [BibTeX][Abstract][Paper]
L. Seeholzer, M. Kuhlow, M. Voegtlin, K. Wegener, Laser modification and optimization of drilling tools for CFRP machining, 20th CIRP Conference on Electro Physical And Chemical Machining, 2021, DOI https://doi.org/10.1016/j.procir.2020.01.141, Nr. 95, Seiten 897-902, [BibTeX][Abstract]
F. Kneubühler, M. Wiessner, K. Wegener, Analysis of WEDM Process with Respect to Wire Wear and Wire Consumption, 20th CIRP Conference on Electro Physical and Chemical Machining (ISEM 2020), 2021, Zürich, Schweiz, [BibTeX]
M. Gerstgrasser, M. Cloots, K. Wegener, Surface quality improvement and adjustment of SLM-processed CM247LC samples by modulated laser parameters, ISEM, 2021, Schweiz, [BibTeX][Abstract]
H. Büttner, J. Stirnimann, K. Wegener, Development of Process Chain for Micro-Injection Molding, ISEM, 2021, [BibTeX][Paper]
J. Weixler, M. Gerstgrasser, K. Wegener, Contactless surface flattening of additive manufactured nickel-base alloy parts by ultra-short pulsed laser ablation, 20th CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING, 2021, Zürich, [BibTeX][Abstract]
Y. Rothacher, A. Nguyen Thi, E. Efthymiou, E. Werth, C. Baumann, B. Lenggenhager, P. Brugger, A. Kunz, L. Imbach, Dissociation of motor control from motor awareness in awake sleepwalkers: An EEG study in virtual reality, medRxiv, 2020, online, DOI 10.1101/2020.11.17.20233072, [BibTeX][Abstract][Paper]
A. Nguyen Thi, P. Wüest, A. Kunz, Human Following Behavior In Virtual Reality, ACM Symposium on Virtual Reality Software and Technology, 2020, Ottawa, Kanada, DOI 10.1145/3385956.3422099, Seiten Article 57, [BibTeX][Abstract][Paper]
A. Nguyen Thi, Y. Rothacher, B. Lenggenhager, P. Brugger, E. Efthymiou, L. Imbach, A. Kunz, Effect of Cognitive Load on Curvature Redirected Walking Thresholds, ACM Symposium on Virtual Reality Software and Technology, 2020, Ottawa, Kanada, DOI 10.1145/3385956.3418950, Seiten Article 17, [BibTeX][Abstract][Paper]
J. Gisler, C. Hirt, V. Holzwarth, A. Kunz, Designing Virtual Training Environments: Does Immersion increase Task Performance?, Cyberworlds 2020, 2020, Caen, Frankreich, ISBN 978-1-7281-6497-7, DOI 10.1109/CW49994.2020.00026, Seiten 125--128, [BibTeX][Abstract][Paper][Video]
A. Nguyen Thi, Y. Rothacher, B. Lenggenhager, P. Brugger, A. Kunz, Effect of Sense of Embodiment on Curvature Redirected Walking Thresholds, ACM Symposium on Applied Perception 2020, 2020, online, ISBN 978-1-4503-7618-1/20/07, DOI 10.1145/3385955.3407932, Seiten Article 16, [BibTeX][Abstract][Paper]
N. Dhingra, R. Koutny, S. Günther, K. Miesenberger, M. Mühlhäuser, A. Kunz, Pointing Gesture Based User Interaction of Tool Supported Brainstorming Meetings, 17th International Conference on Computers Helping People with Special Needs, 2020, online, DOI 10.1007/978-3-030-58805-2_3, Band Lecture Notes in Computer Science, Nr. 12377, Seiten 21--29, [BibTeX][Abstract][Paper]
R. Koutny, S. Günther, N. Dhingra, A. Kunz, K. Miesenberger, M. Mühlhäuser, Accessible Multimodal Tool Support for Brainstorming Meetings, 17th International Conference on Computers Helping People with Special Needs, 2020, online, DOI 10.1007/978-3-030-58805-2_2, Band Lecture Notes in Computer Science, Nr. 12377, Seiten 11--20, [BibTeX][Abstract][Paper]
A. Kunz, K. Miesenberger, M. Mühlhäuser, Accessibility of Non-Verbal Communication: Making Spatial Information Accessible to People with Disabilities - Introduction to the Special Thematic Session, 17th International Conference on Computers Helping People with Special Needs, 2020, online, DOI 10.1007/978-3-030-58805-2_1, Band Lecture Notes in Computer Science, Nr. 12377, Seiten 3--10, [BibTeX][Abstract][Paper]
L. Haferkamp, A. Spierings, K. Wegener, L. Simon, Effect of bimodal powder blends on part density and melt pool fluctuation in laser powder bed fusion, Progress in Additive Manufacturing, 2020, DOI 10.1007/s40964-021-00179-1, [BibTeX][Abstract][Paper]
D. Eisenbarth, A. Menichelli, F. Soffel, K. Wegener, Adaptive Slicing and Process Optimization for Direct Metal Deposition to Fabricate Exhaust Manifolds, AMPA 2020: Industrializing Additive Manufacturing, 2020, Zürich, Schweiz, DOI 10.1007/978-3-030-54334-1_12, [BibTeX]
V. Urundolil, M. Zogg, L. Weiss, K. Wegener, Design of a Test Stand for Lifetime Assessment of Flat Belts in Power Transmission, Procedia CIRP, 2020, DOI 10.1016/j.procir.2020.02.187, Band 91, Seiten 356--361, [BibTeX]
N. Dhingra, E. Valli, A. Kunz, Recognition and Localisation of Pointing Gestures using a RGB-D Camera, 22nd International Conference on Human-Computer Interaction, 2020, Kopenhagen, Dänemark, ISBN 978-3-030-50725-1, ISSN 978-3-030-50726-8, DOI 10.1007/978-3-030-50726-8_27, Seiten 205--212, [BibTeX][Abstract][Paper]
M. Maier, A. Rupenyan, M. Akbari, R. Zwicker, K. Wegener, Turning: Autonomous process set-up through Bayesian optimization and Gaussian process models, 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2020, Gulf of Naples, Italien, Seiten 6, [BibTeX][Abstract]
P. Hernández, J. Mayr, K. Wegener, Reduced thermo-mechanical model of a rotary table of a 5-axis precision machine tool, ASPE Spring Topical Meeting Design and Control of Precision Mechatronic Systems (ASPE 2020), 2020, Cambridge, MA, USA, DOI https://doi.org/10.3929/ethz-b-000424410, [BibTeX]
N. Dhingra, C. Hirt, M. Angst, A. Kunz, Eye Gaze Tracking for Detecting Non-verbal Communication in Meeting Environments, 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications, 2020, Valetta, Malta, DOI 10.5220/0009359002390246, Seiten HUCAPP20-RP-47, [BibTeX][Abstract][Paper]
N. Zimmermann, J. Mayr, K. Wegener, Extended discrete R-Test as on-machine measurement cycle to separate the thermal errors in Z-direction, Special Interest Group Meeting: Thermal Issues 2020, 2020, Aachen, Deutschland, [BibTeX]
P. Hernández, J. Mayr, K. Wegener, Efficient thermo-mechanical model of a precision 5-axis machine tool, euspen Special Interest Group Meeting on Thermal Issues, 2020, Aachen, Deutschland, [BibTeX]
P. Blaser, J. Mayr, K. Wegener, Simulation based comparison of thermal error modelling methods for machine tools, euspen Special Interest Group Metting: Thermal Issues, 2020, Aachen, Deutschland, [BibTeX]
C. Hirt, M. Spahni, Y. Kompis, D. Jetter, A. Kunz, Alles rund um die Maschine - Begehbare virtuelle Schulung an Werkzeugmaschinen, VAR2 - Realität erweitern, 2019, Chemnitz, Deutschland, ISBN 978-3-00-064420-7, Seiten 43--58, [BibTeX][Abstract][Paper]
M. Wiessner, M. Klyuev, Funkenerosives Bohren, Herausforderungen und Chancen für die Luft- und Raumfahrtindustrie, 12. Fachtagung Funkenerosion 26.-27. November 2019, 2019, WZL der RWTH Aachen, [BibTeX]
K. Le,, P. Wozniak,, A. Alavi, M. Fjeld, A. Kunz, DigiMetaplan: Supporting Facilitated Brainstorming for Distributed Business Teams, International Conference on Mobile and Ubiquitous Multimedia, 2019, Pisa, Italien, ISBN 978-1-4503-7624-2, DOI 10.1145/3365610.3365637, Seiten Paper 36, [BibTeX][Abstract][Paper]
A. Zschippang, S. Weikert, K. Wegener, Berechnung von Kronenrädern für Auslegung und Fertigung, Dresdner Maschinenelemente Kolloquium 2019, 2019, Dresden, Deutschland, ISBN 978-3-96548-055-1, Seiten 291--308, [BibTeX]
L. Meier, L. Seeholzer, K. Wegener, A generalized force and chip flow model for oblique cutting and varying undeformed chip crosssections, 15th International Conference on High Speed Machining, 2019, DOI DOI : 10.17973/MMSJ.2019_11_2019046, [BibTeX][Abstract]
H. Büttner, K. Wegener, M. Wiessner, BURR FREE MICRO MILLING FOR ELECTRODES IN DIE-SINKING EDM, COBEM 2019, 2019, [BibTeX][Paper]
M. Wiessner, M. C., E. P., K. Karsten, K. Wegener, Analysis of Eroded Ti-6al-4v Single Craters And Surfaces in Oil By Electron Microscopy and Optical Emisson Spectroscopy, COBEM 2019, 25th International Congress of Mechanical Engineering, 2019, Uberlandia, Brasilien, [BibTeX]
P. Blaser, J. Mayr, K. Wegener, Long-Term Thermal Compensation of 5-Axis Machine Tools Due To Thermal Adaptive Learning Control, 15th International Conference on High Speed Machining, 2019, Prague, Tschechien, [BibTeX]
N. Ackerl, K. Wegener, Observation of Single Ultra-short Laser Pulse Generated Periodic Surface Structures on Line-like Defects, The International Congress on Applications of Lasers & Electro-Optics 2019, 2019, Orlando, USA, [BibTeX][Abstract]
N. Ackerl, G. Pascal, K. Wegener, Laser Marking and Coloration of Ti-6Al-4V with Ultra-Short Pulses, The International Congress on Applications of Lasers & Electro-Optics 2019, 2019, Orlando, USA, [BibTeX][Abstract]
C. Bertoli, P. Stoll, P. Hora, Thermo-Mechanical Analysis of Additively Manufactured Hybrid Extrusion Dies with Conformal Cooling Channels, XV International Conference on Computational Plasticity. Fundamentals and Applications, 2019, Barcelon, Spanien, ISBN COMPLAS 2019. XV International Conference on Computational Plasticity. Fundamentals and Applications, [BibTeX]
D. Eisenbarth, F. Soffel, K. Wegener, Geometry-Based Process Adaption to Fabricate Parts with Varying Wall Thickness by Direct Metal Deposition, Progress in Digital and Physical Manufacturing, 2019, Leiria, Portugal, ISBN 978-3-030-29041-2, DOI 10.1007/978-3-030-29041-2_16, [BibTeX]
A. Staub, A. Spierings, K. Wegener, Application of Electromagnetic Methods to Residual Stresses in Additive Manufacturing: Potential and Necessary Developmen, International Conference on “Barkhausen Noise and Micromagnetic Testing, 2019, Prague, Tschechien, Seiten 7, [BibTeX][Abstract][Paper]
D. Eisenbarth, M. Breuch, F. Soffel, K. Wegener, Challenges of combining direct metal deposition with milling for the fabrication of a rocket nozzle, Proceedings of the Special Interest Group meeting on Advancing Precision in Additive Manufacturing, 2019, Nantes, Frankreich, [BibTeX]
N. Dhingra, A. Kunz, Res3ATN - Deep 3D Residual Attention Network for Hand Gesture Recognition in Videos, International Conference on 3D Vision 2019, 2019, Quebec, Kanada, ISSN 2475-7888, DOI 10.1109/3DV.2019.00061, Seiten 491--501, [BibTeX][Abstract][Paper]
V. Holzwarth, J. Schneider, A. Kunz, J. vomBrocke, Approaching data driven services in the built environment, Smart Services Summit 2019, 2019, Zürich, Schweiz, ISBN 978-3-033-07563-4, Seiten 18--21, [BibTeX][Abstract][Paper]
N. Ackerl, K. Wegener, Evolution of Microstructures on Stainless Steel induced by ultra-short pulsed Laser Ablation, 15th International Conference on Laser Ablation, 2019, Ka'anapali, USA, [BibTeX]
C. Hirt, V. Holzwarth, J. Gisler, J. Schneider, A. Kunz, Virtual Learning Environment for an Industrial Assembly Task, IEEE 9th International Conference on Consumer Electronics, 2019, Berlin, Deutschland, ISBN 978-1-7281-2775-0, ISSN 2166-6822, DOI 10.1109/ICCE-Berlin47944.2019.8966169, Seiten 337--342, [BibTeX][Abstract][Paper]
V. Holzwarth, J. Schneider, A. Kunz, J. vomBrocke, Data driven value creation in AEC along the building lifecycle, CISBAT, 2019, Lausanne, Schweiz, DOI 10.1088/1742-6596/1343/1/012046, Band J. Phys.: Conf. Ser. 1343 012046, Seiten 1343 (2019) 012046, [BibTeX][Abstract][Paper]
K. Le, I. Avellino, C. Fleury, M. Fjeld, A. Kunz, GazeLens: Guiding Attention to Improve Gaze Interpretation in Hub-Satellite Collaboration, 17th IFIP TC.13 International Conference on Human-Computer Interaction, 2019, Paphos, Zypern, ISBN 978-3-030-29383-3, DOI 10.1007/978-3-030-29384-0_18, Seiten 282--303, [BibTeX][Abstract][Paper]
J. Kubenke, A. Kunz, Potentials of IT-supported Assistive Systems: Comparison of two User Studies in the Manufacturing Industry, 9th IFAC Triannual Conference on Manufacturing Modeling, Management and Control, 2019, Berlin, Deutschland, ISSN 2405-8963, DOI 10.1016/j.ifacol.2019.11.474, Seiten 1866--1871, [BibTeX][Abstract][Paper]
N. Ackerl, K. Wegener, Efficiency study on single pulse, burst mode and multi pulse ultra-short pulsed ablation of pure copper, Conference on Lasers and Electro-Optics Europe, 2019, München, Deutschland, ISBN 978-1-7281-0469-0, Nr. CFP19ECL-ART, [BibTeX]
L. Meier, P. Hernández, K. Wegener, Constant Power In-process Tribometry & Simulative Investigation of Thermal Machine Tool Errors, MTTRF 2019 Annual Meeting, 2019, San Francisco, USA, [BibTeX]
M. Streuer, A. Mention, T. Gittler, Unveiling the Affordances of Artificial Intelligence for Knowledge Creation: Insights from an Exploratory Study, European Academy of Management Annual Conference 2019, 26-28 June, Lisbon, Portugal, 2019, Lisbon, Portugal, [BibTeX][Abstract]
D. Eisenbarth, F. Soffel, K. Wegener, Buildup stability and height prediction for direct metal deposition, Lasers in Manufacturing Conference, 2019, München, Deutschland, [BibTeX]
M. Gerstgrasser, M. Maier, J. Borinelli, K. Wegener, New concept for multi-material processing with SLM, Lasers in Manufacturing Conference 2019, 2019, Munich, Deutschland, Seiten 1--8, [BibTeX][Abstract]
N. Ackerl, J. Gysel, M. Warhanek, K. Wegener, CAM solution for quasi-tangential laser ablation of complex 3D workpieces, Lasers in Manufacturing Conference 2019, 2019, München, Deutschland, [BibTeX][Abstract]
M. Dobler, M. Ballandies, V. Holzwarth, On the Extension of Digital Ecosystems for SCM and Customs with Distributed Ledger Technologies: Requirements Anlysis, Innovation Assessment, and Prototype Design for the Lake Constance Region, IEEE International Conference on Engineering, Technology and Innovation, 2019, Sophia Antipolis, Frankreich, DOI 10.1109/ICE.2019.8792646, [BibTeX][Abstract]
T. Gittler, F. Stoop, D. Kryscio, L. Weiss, K. Wegener, Condition monitoring system for machine tool auxiliaries, 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2019, Gulf of Naples, Italien, DOI https://doi.org/10.1016/j.procir.2020.05.062, Band 88, Seiten 358--363, [BibTeX][Abstract][Paper]
S. Günther, R. Koutny, N. Dhingra, M. Funk, C. Hirt, K. Miesenberger, M. Mühlhäuser, A. Kunz, MAPVI: Meeting Accessibility for Persons with Visual Impairments, PErvasive Technologies Related to Assistive Environments, 2019, Rhodes, Griechenland, ISBN 978-1-4503-6232-0, DOI https://doi.org/10.1145/3316782.3322747, Seiten 343--352, [BibTeX][Abstract][Paper][Slides]
P. Blaser, C. Hauschel, R. Rüttimann, P. Hernández, J. Mayr, K. Wegener, Thermal characterization and modelling of a gantry-type machine tool linear axis, 19th euspen International Conference, 2019, Bilbao, Spanien, [BibTeX][Abstract][Paper]
N. Ackerl, G. Pascal, M. Warhanek, J. Gysel, K. Wegener, Invited: Ultra-short Pulsed Laser Marking and Coloration of Metals with Segmented Pixel Parameter Transformation, LPM2019 - The 20th International Symposium on Laser Precision Microfabrication, 2019, Hiroshima, Japan, [BibTeX][Abstract]
N. Ackerl, K. Wegener, Ablation Characteristics of Alumina and Zirconia Ceramics on Ultra-short Pulsed Laser Machining, LPM2019 - The 20th International Symposium on Laser Precision Microfabrication, 2019, Hiroshima, Japan, [BibTeX][Abstract]
E. Relea, L. Weiss, K. Wegener, Experimental Study on the Geometrical and Dimensional Stability of Natural Stone Sorts for Precision Machinery , 26th CIRP Conference on Life Cycle Engineering, 2019, USA, DOI https://doi.org/10.3929/ethz-b-000343861, [BibTeX]
C. Bertoli, C. Becker, P. Hora, J. Maier, P. Stoll, A. Spierings, Development of actively cooled, hybrid extrusion dies for increased process output, 11th World Congress on Aluminum: Aluminium Two Thousand, 2019, Treviso, Italien, ISBN Online Proceedings: 11th World Congress on Aluminum: Aluminium Two Thousand, [BibTeX]
C. Hirt, M. Zank, A. Kunz, Short-term Path Prediction for Virtual Open Spaces, IEEE Virtual Reality 2019, 2019, Osaka, Japan, ISBN 978-1-7281-1377-7, ISSN 2642-5254, DOI 10.1109/VR.2019.8797709, Seiten 978--979, [BibTeX][Abstract][Paper]
C. Hirt, M. Zank, A. Kunz, PReWAP: Predictive Redirected Walking using Artificial Potential Fields, IEEE Virtual Reality 2019, 2019, Osaka, Japan, ISBN 978-1-7281-1378-4, ISSN 2642-5254, DOI 10.1109/VR.2019.8798118, Seiten 976--977, [BibTeX][Abstract][Paper]
N. Ackerl, J. Gysel, M. Warhanek, K. Wegener, Ultra-short pulsed laser manufacturing of yttria stabilized alumina-toughened zirconia dental implants, SPIE BiOS, 2019, San Francisco, California, USA, DOI 10.1117/12.2507495, Band Proc. SPIE 10857, Lasers in Dentistry XXV, Nr. 108570J, [BibTeX][Abstract]
N. Ackerl, J. Gysel, M. Warhanek, K. Wegener, Ultra-short pulsed high-power laser conditioning of super-abrasive grinding worms, SPIE LASE, 2019, San Francisco, California, USA, DOI 10.1117/12.2506884, Band Proc. SPIE 10911, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems VIII, Nr. 1091105, [BibTeX][Abstract]
T. Gittler, R. Lorenz, L. Weiss, K. Wegener, Analytical user story clustering supporting requirements and synthesizing efforts for the digital transformation, International Conference on Competitive Manufacturing (COMA '19). Proceedings, 2019, Stellenbosch, Südafrika, ISBN 978-0-7972-1779-9, Seiten 39--46, [BibTeX][Abstract]
T. Gittler, E. Relea, C. Donatella, C. Giorgio, L. Weiss, C. Daniele, K. Wegener, Towards predictive quality management in assembly systems with low quality low quantity data – a methodological approach, 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 18-20 July 2018, Gulf of Naples, Italy, 2019, Gulf of Naples, Italien, DOI https://doi.org/10.1016/j.procir.2019.02.026, Band Procedia CIRP, Nr. 79, Seiten 125-130, [BibTeX][Abstract]
T. Gittler, A. Gontarz, L. Weiss, K. Wegener, A fundamental approach for data acquisition on machine tools as enabler for analytical Industrie 4.0 applications, 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 18-20 July 2018, Gulf of Naples, Italy, 2019, Gulf of Naples, Italien, DOI https://doi.org/10.1016/j.procir.2019.02.088, Band Procedia CIRP, Nr. 79, Seiten 586-591, [BibTeX][Abstract]
E. Relea, L. Weiss, M. Schlüssel, K. Wegener, Novel Clamping System for Machine Tools, International Conference on Competitive Manufacturing, 2019, [BibTeX]
C. Baumgart, V. Heizer, K. Wegener, In-process workpiece based temperature measurement in cylindrical grinding, 8th CIRP Conference on High Performance Cutting, 2018, Budapest, Ungarn, DOI https://doi.org/10.1016/j.procir.2018.08.206, Band 77, Seiten 42--45, [BibTeX][Abstract]
M. Klyuev, C. Baumgart, H. Büttner, K. Wegener, Flushing velocity observations and analysis during EDM drilling, 8th CIRP Conference on High Performance Cutting, 2018, Budapest, Ungarn, DOI https://doi.org/10.1016/j.procir.2018.08.210, [BibTeX][Abstract]
M. Klyuev, C. Baumgart, K. Wegener, Fluid dynamics in electrode flushing channel and electrode-workpiece gap during EDM drilling, 19th CIRP Conference on Electro Physical and Chemical Machining, 2018, Bibao, Spanien, DOI https://doi.org/10.1016/j.procir.2017.12.058, [BibTeX][Abstract]
U. Maradia, M. Klyuev, C. Baumgart, Efficient machining of complex shaped seal slots for turbomachinery, 68th CIRP General Assembly, 2018, Tokio, Japan, DOI https://doi.org/10.1016/j.cirp.2018.04.099, [BibTeX][Abstract]
F. Pavlicek, D. Pamies, J. Mayr, S. Züst, P. Blaser, P. Hernández, K. Wegener, Using meta models for enclosures in machine tools, Conference on Thermal Issues in Machine Tools,, 2018, Dresden, Deutschland, ISBN 978-3-95735-085-5, [BibTeX]
J. Mayr, T. Tiziana, P. Blaser, K. Wegener, Thermal error compensation of 5‐axis machine tools using a staggered modelling approach, Conference on Thermal Issues in Machine Tools, 2018, Dresden, Deutschland, ISBN 978-3-95735-085-5, [BibTeX]
A. Nguyen Thi, A. Kunz, Discrete Scene Rotation During Blinks and Its Effect on Redirected Walking Algorithms, 24th ACM Symposium on Virtual Reality Software and Technology, 2018, Tokyo, Japan, ISBN 978-1-4503-6086-9, DOI 10.1145/3281505.3281515, Seiten No. 29, [BibTeX][Abstract][Paper]
S. Eichstädt, K. Ruhm, A. Shestakov, Dynamic measurement and its relation to metrology, mathematical theory and signal processing: a review, XXII World Congress of the International Measurement Confederation, 2018, Prague, Tschechien, [BibTeX][Abstract]
P. Hernández, P. Blaser, J. Mayr, K. Wegener, Design improvement of the cutting fluid supply of a large 5-axis machine tool, 33rd ASPE Annual Meeting, 2018, Las Vegas, Nevada, USA, Band 70, Seiten 53-56, [BibTeX]
N. Ackerl, P. Börner, K. Wegener, Towards Application of Hierarchical Structures by ultra-short pulsed Laser Ablation, The International Congress on Applications of Lasers & Electro-Optics, 2018, Orlando, FL, USA, USA, ISBN 978-1-940168-1-42, [BibTeX][Abstract]
T. Bauer, A. Spierings, K. Wegener, LPBF PROCESSED NICKEL-IRON SOFT-MAGNETIC ALLOY: INFLUENCE OF HEAT TREATMENTS ON DENSITY, MICROSTRUCTURE AND MAGNETIC PROPERTIES, Materials Science and Technology, 2018, Columbus (OH), USA, ISBN 978-0-87339-768-1, Seiten 133 -- 140, [BibTeX][Abstract]
M. Postel, N. Bugdayci, J. Monnin, F. Kuster, K. Wegener, Improved stability predictions in milling through more realistic load conditions, 8th CIRP Conference on High Performance Cutting (HPC 2018), 2018, Budapest, Ungarn, Band 77, Seiten 102--105, [BibTeX]
L. Seeholzer, R. Voss, F. Grossenbacher, F. Kuster, K. Wegener, Fundamental analysis of the cutting edge micro-geometry in orthogonal machining of unidirectional Carbon Fibre Reinforced Plastics (CFRP), 8th CIRP Conference on High Performance Cutting (HPC 2018), Budapest, Hungary, June 25-27, 2018, 2018, DOI https://doi.org/10.1016/j.procir.2018.09.040, Band 77, Seiten 379--382, [BibTeX][Abstract]
K. Wegener, T. Gittler, L. Weiss, Dawn of new machining concepts: Compensated, intelligent, bioinspired, 8th CIRP Conference on High Performance Cutting (HPC 2018), 2018, Budapest, Ungarn, DOI https://doi.org/10.1016/j.procir.2018.08.194, Band Procedia Cirp, Nr. 77 (2018), Seiten 1--17, [BibTeX][Abstract]
J. Kubenke, P. Roh, A. Kunz, Assessing the Efficiency of Information Retrieval from the Digital Shadow at the Shop Floor using IT Assistive Systems, Mechatronics 2018, 2018, Glasgow, Vereinigtes Königreich, ISBN 978-1-909522-37-4, Seiten 202--209, [BibTeX][Abstract][Paper]
A. Spierings, K. Wegener, Rauch- und Spritzerbildung beim SLM-Verfahren: Entstehung, Einfluss auf Pro-zessparameter, Qualität und Reproduzierbarkeit, 5. Mitteldeutsches Forum Rapid Technologien, 2018, Jena, Deutschland, [BibTeX][Abstract]
A. Staub, A. Spierings, K. Wegener, Correlation of Meltpool Characteristics and Residual Stresses at High Laser Intensity for Metal LPBF Process, 21st International Conference on Advances in Materials & Processing Technologies, 2018, Dublin, Irland, [BibTeX][Abstract]
E. Relea, R. Kussmaul, L. Weiss, M. Zogg, P. Ermanni, K. Wegener, Application of Carbon Fiber Reinforced Polymer Sandwich Structures in Multiaxial Testing Machines, 12th International Conference on Sandwich Structures, 2018, Schweiz, DOI https://doi.org/10.5075/epfl-ICSS12-2018-74-76, [BibTeX]
A. Nguyen Thi, Y. Rothacher, B. Lenggenhager, P. Brugger, A. Kunz, Individual differences and impact of gender on curvature redirection thresholds, 2018 ACM Symposium on Applied Perception, 2018, Vancouver, Kanada, ISBN 978-1-4503-5894-1, DOI 10.1145/3225153.3225155, Seiten Paper 5, [BibTeX][Abstract][Paper]
P. Hernández, J. Mayr, P. Blaser, F. Pavliček, K. Wegener, Model Order Reduction of Thermal Models of Machine Tools with Varaying Boundary Conditions, Conference on Thermal Issues in Machine Tools, 2018, Dresden, Deutschland, [BibTeX]
L. Clack, C. Hirt, M. Wenger, D. Saleschus, A. Kunz, H. Sax, VIRTUE – A Virtual Reality Trainer for Hand Hygiene, International Workshop on Immersive Technologies and Serious Gaming for Health Professions Education, 2018, Zakynthos, Griechenland, ISBN 978-1-5386-8161-9, ISSN 978-1-5386-8162-6, DOI 10.1109/IISA.2018.8633588, Seiten 1--2, [BibTeX][Abstract][Paper]
J. Kubenke, A. Kunz, Efficient Motion Analysis of IT Support for Information Retrieval at Manual Workplaces, 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2018, Neapel, Italien, ISSN 2212-8271, DOI 10.1016/j.procir.2019.02.049, Band 79C, Seiten 210--214, [BibTeX][Abstract][Paper]
A. Kunz, K. Miesenberger, L. Zeng, G. Weber, Virtual Navigation Environment for Blind and Low Vision People, 16th Biennial International Conference on Computers Helping People with Special Needs, 2018, Linz, Österreich, DOI 10.1007/978-3-319-94274-2_17, Band LNCS 10897, Nr. 2, Seiten 114--122, [BibTeX][Abstract][Paper]
P. Hernández, N. Zimmermann, F. Pavliček, P. Blaser, W. Knapp, J. Mayr, K. Wegener, Learning Efficient Modeling and Compensation for Thermal Behavior of Machine Tools, MTTRF 2018 Annual Meeting, 2018, USA, [BibTeX]
C. Hirt, M. Zank, A. Kunz, Geometry Extraction for Ad Hoc Redirected Walking using a SLAM Device, 5th International Conference on Augmented Reality, Virtual Reality and Computer Graphics, 2018, Lecce, Italien, DOI 10.1007/978-3-319-95270-3_3, Band LNCS, Nr. 10850, Seiten 35--53, [BibTeX][Abstract][Paper]
A. Nguyen Thi, M. Inhelder, A. Kunz, Discrete Rotation during Eye-Blink, 5th International Conference on Augmented Reality, Virtual Reality and Computer Graphics, 2018, Lecce, Italien, DOI 10.1007/978-3-319-95270-3_13, Band LNCS, Nr. 10850, Seiten 183--189, [BibTeX][Abstract][Paper][Slides]
M. Vetterli, R. Kleijnen, M. Schmid, K. Wegener, PROCESS IMPACT OF ELLIPTIC SMOOTHNESS AND POWDER SHAPE FACTORS ON ADDITIVE MANUFACTURING WITH LASER SINTERING, Annual Technical Conference of the Society of Plastics Engineers, 2018, Orlando Florida, USA, [BibTeX][Abstract][Paper]
M. Afrasiabi, M. Röthlin, E. Chatzi, K. Wegener, A Robust Particle-Based Solver for Modeling Heat Transfer in Multiphase Flows, European Conference on Computational Mechanics, 2018, Glasgow, Vereinigtes Königreich, Seiten 1--12, [BibTeX][Abstract]
M. Kuffa, N. Lanz, D. Spescha, K. Wegener, Efficient dynamic machine structure modelling for high performance dry grinding, 8th CIRP Conference on High Performance Cutting, 2018, Budapest, Ungarn, [BibTeX][Paper]
P. Roh, A. Kunz, T. Netland, Data-driven detection of moving bottlenecks in multi-variant production lines, 16th IFAC Symposium on Information Control Problems in Manufacturing, 2018, Bergamo, Italien, DOI 10.1016/j.ifacol.2018.08.251, Band 51, Nr. 11, Seiten 158--163, [BibTeX][Abstract][Paper]
Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Visual Capture of Gait in Redirected Walking, Measuring Behavior, 2018, Manchester, Vereinigtes Königreich, ISBN 978-1-910029-39-8, DOI 10.3929/ethz-b-000269155, Seiten 427--428, [BibTeX][Abstract][Paper]
J. Kubenke, A. Kunz, Efficiency Measurement of IT Support for Information Retrieval at Manual Workplaces, IEEE International Conference on Industrial Cyber-Physical Systems, 2018, St. Petersburg, Russland, ISBN 978-1-5386-6530-5/18, DOI 10.1109/ICPHYS.2018.8390768, Seiten 567--572, [BibTeX][Abstract][Paper]
M. De, M. Wiessner, G. Bernardelli, F. Kuster, K. Wegener, Fundamental Investigation of EDM Plasmas, Part II: Parametric Analysis of Electric Discharges in Gaseous Dielectric Medium, 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, 2018, Bilbao, Spanien, [BibTeX]
M. Wiessner, M. De, C. Martendal, F. Kuster, K. Wegener, Fundamental Investigation of EDM Plasmas, Part I: A Comparison between Electric Discharges in Gaseous and Liquid Dielectric Media, 19th CIRP Conference on Electro Physical and Chemical Machining, 23-27 April 2017, 2018, Bilbao, Spanien, [BibTeX]
M. Wiessner, P. Blaser, S. Böhl, J. Mayr, K. Wegener, Evaluation of thermal errors of 5-axis machine tools by on-machine measurements of a thermal test piece, Conference on Thermal Issues in Machine Tools, 2018, Dresden, Deutschland, [BibTeX][Abstract][Paper]
P. Blaser, J. Mayr, F. Pavliček, P. Hernández, K. Wegener, Adaptive learning control for thermal error compensation on 5-axis machine tools with sudden boundary condition changes, Conference on Thermal Issues in Machine Tools, 2018, Dresden, Deutschland, [BibTeX][Abstract][Paper]
C. Hirt, M. Zank, A. Kunz, Preliminary Environment Mapping for Redirected Walking, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, 2018, Reutlingen, Deutschland, DOI 10.1109/VR.2018.8446262, Seiten 573--574, [BibTeX][Abstract][Paper][Slides]
A. Nguyen Thi, Y. Rothacher, A. Kunz, P. Brugger, B. Lenggenhager, Effect of Environment Size on Curvature Redirected Walking Thresholds, 25th IEEE Conference on Virtual Reality and 3D User Interfaces, 2018, Reutlingen, Deutschland, DOI 10.1109/VR.2018.8446225, Seiten 645--646, [BibTeX][Abstract][Paper][Slides]
A. Staub, A. Spierings, K. Wegener, Selective Laser Melting at High Laser Intensity: Overhang Surface Characterization and Optimization, Direct Digital Manufacturing Conference, 2018, Berlin, Deutschland, ISBN 978-3-8396-1320-7, [BibTeX][Abstract]
K. Ruhm, From Nondynamic Errors to Dynamic Errors – A Structural Deployment, XXII World Congress of the International Measurement Confederation, 2018, Prague, Tschechien, DOI 10.1088/1742-6596/1065/21/212020, [BibTeX][Abstract]
U. Pala, S. Süßmaier, F. Kuster, K. Wegener, Experimental Investigation of Tool Wear in Electroplated Diamond Wire Sawing of Silicon, Procedia CIRP, 2018, DOI 10.1016/j.procir.2018.09.038, Band 77, Seiten 371-374, [BibTeX]
R. Kleijnen, M. Schmid, K. Wegener, J. Sesseg, Insights into the development of a short-fiber reinforced polypropylene for laser sintering, Proceedings of PPS-32, 2017, Lyon, Frankreich, DOI 10.1063/1.5016791, Band 1914, Seiten 190002, [BibTeX][Abstract]
A. Kunz, K. Wegener, Der Einsatz der virtuellen Realität in der Produktionsplanung, 4. Fachkonferenz zu VR/AR-Technologien in Anwendung und Forschung an der Professur Werkzeugmaschinen und Umformtechnik, 2017, Chemnitz, Deutschland, ISBN 978-3-00-058419-0, DOI 10.3929/ethz-b-000218665, Seiten 27--36, [BibTeX][Abstract][Paper]
J. Mayr, F. Pavliček, S. Züst, P. Blaser, P. Hernández, S. Weikert, K. Wegener, Thermal error research, an overview, Laser Metrology and Machine Performance XII, 2017, Wotton under Edge, Vereinigtes Königreich, ISBN 978-0-9566790-9-3, Band 12, Seiten 10--31, [BibTeX]
M. Wiessner, H. Büttner, M. Klyuev, Herstellung von selbstreinigenden Oberflächen durch funkenerosive Bearbeitung, 11. Fachtagung Funkenerosion 29.-30. November 2017, 2017, WZL der RWTH Aachen, [BibTeX]
A. Nguyen Thi, A. Kunz, Y. Rothacher, P. Brugger, B. Lenggenhager, Spontaneous Alternation Behavior in Humans, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Schweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3139168, Seiten 21:1--21.4, [BibTeX][Abstract][Paper]
C. Hirt, M. Zank, A. Kunz, Real-time Wall Outline Extraction for Redirected Walking, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Schweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3143416, Seiten 72:1--72:2, [BibTeX][Abstract][Paper][Slides]
K. Le, M. Fjeld, A. Alavi, A. Kunz, Immersive Environment for Distributed Creative Collaboration, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Schweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3139163, Seiten 16:1--16:4, [BibTeX][Abstract][Paper][Video]
A. Nguyen Thi, F. Cervellati, A. Kunz, Gain Compensation in Redirected Walking, ACM Symposium on Virtual Reality Software and Technology, 2017, Göteborg, Schweden, ISBN 978-1-4503-5548-3, DOI 10.1145/3139131.3139167, Seiten 20:1--20:4, [BibTeX][Abstract][Paper]
P. Blaser, P. Hernández, J. Mayr, M. Wiessner, K. Wegener, Thermal errors of a large 5-axis machine tool due to cutting fluid influences – evaluation with thermal test piece, American Socienty for Precision Engineering, 2017, Charlotte, USA, ISBN 978-1-887706-74-2, Band 32, Seiten 531-536, [BibTeX][Paper]
P. Stoll, B. Leutenecker-Twelsiek, A. Spierings, C. Klahn, K. Wegener, Temperature Monitoring of an SLM Part with Embedded Sensor, International Conference on Additive Manufacturing in Products and Applications, 2017, Zurich, Schweiz, ISBN Print: 978-3-319-66865-9; Online: 978-3-319-66866-6, DOI 10.1007/978-3-319-66866-6_26, Seiten 273 -- 284, [BibTeX][Abstract]
D. Eisenbarth, F. Wirth, K. Spieldiener, K. Wegener, Enhanced Toolpath Generation for Direct Metal Deposition by Using Distinctive CAD Data, Industrializing Additive Manufacturing - Proceedings of Additive Manufacturing in Products and Applications, 2017, Zürich, Schweiz, ISBN 9783319668659, DOI 10.1007/978-3-319-66866-6_15, Seiten 152--161, [BibTeX]
M. Mussgnug, A. Sadowska, R. Moryson, M. Meboldt, Target based analysis –a model to analyse tests based on mobile eye tracking recordings, 21st International Conference on Engineering Design, Section: Human Behaviour in Design, 2017, Vancouver, Kanada, ISBN 978-1-904670-96-4, Seiten 59--68, [BibTeX][Abstract]
S. Züst, P. Blaser, J. Mayr, W. Knapp, K. Wegener, Thermo-energetic issues in 5-axis machine tools, MTTRF 2017 Annual Meeting, 2017, San Francisco, USA, [BibTeX][Abstract][Paper]
T. Heeling, M. Gerstgrasser, K. Wegener, Investigation of Selective Laser Melting Spatter Characteristics for Single- and Multi-Beam Strategies using High Speed Imaging, Lasers in Manufacturing Conference 2017, 2017, München, Deutschland, [BibTeX][Abstract]
F. Wirth, S. Freihse, D. Eisenbarth, K. Wegener, Interaction of powder jet and laser beam in blown powder laser deposition processes: Measurement and simulation methods, Lasers in Manufacturing Conference, 2017, München, Deutschland, Seiten 1-10, [BibTeX][Abstract][Paper]
M. Warhanek, J. Pfaff, J. Gysel, K. Wegener, Rotary 2.5D pulsed laser ablation, Lasers in Manufacturing Conference, 2017, München, Deutschland, [BibTeX][Abstract]
T. Bauer, A. Spierings, K. Wegener, Investigations of mixing behaviour of binary nickel-iron blends using SLM, Proceedings of the 14th Rapid.Tech Conference, 2017, Erfurt, Deutschland, ISBN 978-3-446-45459-0, Seiten 377--390, [BibTeX][Abstract][Paper]
C. Baumgart, J. Julian, F. Kuster, K. Wegener, A study of the interaction between coolant nozzles and the airflow around a grinding wheel in cylindrical grinding, 16th Conference on Modelling of Machining Operations, 2017, Cluny, Frankreich, DOI 10.1016/j.procir.2017.03.261, [BibTeX][Abstract][Paper]
M. Engeler, A. Elmiger, A. Kunz, D. Zogg, K. Wegener, Online Condition Monitoring Tool for Automated Machinery, 16th CIRP Conference on Modeling of Machining Operations, 2017, Cluny, Frankreich, DOI 10.1016/j.procir.2017.04.003, Band 58, Seiten 323--328, [BibTeX][Abstract][Paper]
E. Relea, L. Weiss, R. Kussmaul, M. Zogg, G. Ramstein, K. Wegener, Precisely Adjustable Inserts for Stiffness-Driven CFRP Sandwich Structures, CIRP, 2017, Karlsruhe, Deutschland, DOI https://doi.org/10.1016/j.procir.2017.03.175, [BibTeX]
R. Kussmaul, M. Zogg, L. Weiss, E. Relea, R. Jacomet, P. Ermanni, Carbon Fiber Reinforced Polymers for High-dynamic Testing Machines, CIRP, 2017, Karlsruhe, Deutschland, DOI https://doi.org/10.1016/j.procir.2017.03.300, [BibTeX]
P. Blaser, F. Pavliček, K. Mori, J. Mayr, S. Weikert, K. Wegener, Adaptive Learning Control for Thermal Error Compensation of 5-Axis Machine Tool, NAMRC 45, 2017, Los Angeles, USA, [BibTeX]
R. Voss, L. Seeholzer, F. Kuster, K. Wegener, Cutting process tribometer experiments for evaluation of friction coefficient close to a CFRP machining operation, 1st CCMPM 2017 – CIRP Conference on Composite Materials Parts Manufacturing (CIRP CCMPM 2017), Karlsruhe, Germany, June 8-9, 2017, 2017, DOI https://doi.org/10.1016/j.procir.2017.03.225, Band 66, Seiten 204--209, [BibTeX][Abstract]
L. Meier, N. Schaal, K. Wegener, In-process Measurement of the Coefficient of Friction on Titanium, CIRP CMMO 2017, 2017, Cluny, Frankreich, Seiten 163--168, [BibTeX][Paper]
M. Zank, A. Kunz, Optimized Graph Extraction and Locomotion Prediction for Redirected Walking, IEEE Symposium on 3D User Interfaces, 2017, Los Angeles, USA, ISBN 978-1-5090-6715-2, DOI 10.1109/3DUI.2017.7893328, Seiten 120--129, [BibTeX][Abstract][Paper]
M. Zank, C. Yao, A. Kunz, Multi-phase Wall Warner System for Real Walking in Virtual Environments, IEEE Symposium on 3D User Interfaces, 2017, Los Angeles, USA, ISBN 978-1-5090-6715-2, DOI 10.1109/3DUI.2017.7893352, Seiten 223--224, [BibTeX][Abstract][Paper][Slides]
P. Hernández, P. Blaser, J. Mayr, S. Weikert, K. Wegener, Measurement of the effect of the cutting fluid on the thermal response of a five-axis machine tool, Laser Metrology and Machine Performance XII, 2017, Renishaw Innovation Center, Wotton-under-Edge, Vereinigtes Königreich, [BibTeX]
T. Bänziger, A. Kunz, K. Wegener, A Library of Skills and Behaviors for Smart Mobile Assistant Robots in Automotive Assembly Lines, The 2017 Conference on Human-Robot Interaction, 2017, Wien, Österreich, ISBN 978-1-4503-4885-0, DOI 10.1145/3029798.3038415, Seiten 77--78, [BibTeX][Abstract][Paper][Slides]
P. Stoll, A. Spierings, M. Gebauer, B. Müller, S. Polster, T. Feld, M. Klinger, A. Zurbrügg, High performance sheet metal forming tooling by additive manufacturing, International Conference on Additive Technologies, 2016, Nürnberg, Deutschland, [BibTeX][Abstract]
T. Heeling, L. Zimmermann, K. Wegener, Multi-Beam Strategies for the Optimization of the Selective Laser Melting Process, 2016 Annual International Solid Freeform Fabrication Symposium, 2016, Austin, USA, Seiten 1428-1438, [BibTeX][Abstract]
T. Heeling, K. Wegener, Computational Investigation of Synchronized Multibeam Strategies for the Selective Laser Melting Process, 9th International Conference on Photonic Technologies - LANE 2016, 2016, Fuerth, Deutschland, DOI http://dx.doi.org/10.1016/j.phpro.2016.08.094, Band 83, Seiten 899-908, [BibTeX][Abstract]
R. Voß, M. Henerichs, C. Walch, F. Kuster, K. Wegener, Friction Analysis between Carbon Firbe Reinforced Plastic and Diamond Coating with Cutting Process Tribometer, Internation Conference on Precision Engineering, 2016, Hamamatsu, Japan, [BibTeX][Abstract]
R. Roth, U. Maradia, K. Wegener, A method to affect surface wettability using EDM, EUSPEN Special Interest Group: Structured and Freeform Surfaces, 2016, Copenhagen, Dänemark, [BibTeX][Abstract]
F. Soffel, M. Zank, A. Kunz, Postural Stability Analysis In Virtual Reality Using the HTC Vive, The ACM Symposium on Virtual Reality Software and Technology 2016, 2016, München, Deutschland, ISBN 978-1-4503-4491-3, DOI 10.1145/2993369.2996341, Seiten 351--352, [BibTeX][Abstract][Paper]
A. Kunz, L. Brogli, A. Alavi, Interference Measurement of Kinect for Xbox One, The ACM Symposium on Virtual Reality Software and Technology 2016, 2016, München, Deutschland, ISBN 978-1-4503-4491-3, DOI 10.1145/2993369.2996329, Seiten 345--346, [BibTeX][Abstract][Paper]
A. Nguyen Thi, Y. Rothacher, P. Brugger, B. Lenggenhager, A. Kunz, Estimation of individual redirected walking thresholds using standard perception tests, The ACM Symposium on Virtual Reality Software and Technology 2016, 2016, München, Deutschland, ISBN 978-1-4503-4491-3, DOI 10.1145/2993369.2996304, Seiten 329--330, [BibTeX][Abstract][Paper]
R. Kleijnen, M. Schmid, K. Wegener, Nucleation and Impact Modification of Polypropylene Laser Sintered Parts, Polymer Processing Society Conference 2015, 2016, Graz, Österreich, DOI 10.1063/1.4965572, Band 1779, Seiten 100004, [BibTeX][Abstract]
F. Pavliček, F. Dietz, P. Blaser, S. Züst, J. Mayr, S. Weikert, K. Wegener, An approach for developing meta models out of fluid simulations in enclosures of precision machine tools, 31st ASPE Annual Meeting, 2016, Portland, Oregon, USA, [BibTeX]
K. Wegener, A. Kunz, L. Bochmann, T. Bänziger, Industrie 4.0 für den Maschinen- und Anlagenbau, 3. Wiener Produktionstechnik Kongress, 2016, Wien, Österreich, ISBN 978-3-7003-1976-4, DOI 10.3929/ethz-a-010722924, Band 3, Seiten 29--52, [BibTeX][Abstract][Paper]
F. Wirth, D. Eisenbarth, K. Wegener, Absorptivity Measurements and Heat Source Modeling to Simulate Laser Cladding, Laser Assisted Net Shape Engineering / Physics Procedia, 2016, Fürth, Deutschland, ISSN 1875-3892, DOI 10.1016/j.phpro.2016.08.148, Band 83, Seiten 1424-1434, [BibTeX][Abstract][Paper]
S. Züst, P. Paul, L. Weiss, K. Wegener, Modelling and Compensation of Thermally Induced Positioning Errors in a High Precision Positioning Application, Proceedings of the 7th IFAC Symposium on Mechatronic Systems, 2016, Loughborough University, Vereinigtes Königreich, Seiten 347--353, [BibTeX][Paper]
J. Teiwes, T. Bänziger, A. Kunz, K. Wegener, Identifying the Potential of Human-Robot Collaboration in Automotive Assembly Lines using a Standardised Work Description, 22nd International Conference on Automation and Computing, 2016, Colchester, Vereinigtes Königreich, ISBN 978-1-86218-132-8, DOI 10.1109/IConAC.2016.7604898, Seiten 1--6, [BibTeX][Abstract][Paper]
P. Stoll, A. Spierings, K. Wegener, S. Polster, M. Gebauer, SLM Processing of 14 Ni (200 Grade) Maraging Steel, Direct Digital Manufacturing Conference, 2016, Berlin, Deutschland, ISBN 978-3-8396-1001-5, Seiten 448 p, [BibTeX][Abstract]
P. Stoll, J. Mathew, A. Spierings, T. Bauer, R. Maier, K. Wegener, Embedding fibre optical sensors into SLM parts, Solid Freefrom Fabrication Symposium, 2016, Austin, TX, USA, [BibTeX][Abstract]
T. Bauer, A. Spierings, K. Wegener, Microstructure and electro-magnetic properties of a nickel-based anti-magnetic shielding, Solid Freeform Fabrication Symposium, 2016, Austin (Texas), USA, [BibTeX][Abstract][Paper]
J. Mayr, M. Müller, S. Weikert, Automated thermal main spindle & B-axis error compensation of 5-axis machine tools, CIRP Annals - Manufacturing Technology, 2016, Band 65, Nr. 1, Seiten 479--482, [BibTeX]
S. Züst, R. Züst, T. Schudeleit, K. Wegener, Development and Application of an Eco-design Tool for Machine Tools, 23rd CIRP Conference on Life Cycle Engineering, Procedia CIRP 48, 2016, Berlin, Deutschland, DOI 10.1016/j.procir.2016.03.032, Seiten 431-436, [BibTeX][Abstract][Paper]
L. Bochmann, T. Bänziger, A. Kunz, K. Wegener, Human-Robot Collaboration in Decentralized Manufacturing Systems: An Approach for Simulation-based Evaluation of Future Intelligent Production, 10th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2016, Neapel, Italien, DOI 10.1016/j.procir.2016.06.021, Band 62, Seiten 624--629, [BibTeX][Abstract][Paper]
S. Pölzer, A. Kunz, A. Alavi, K. Miesenberger, An Accessible Environment to Integrate Blind Participants into Brainstorming Sessions, 15th International Conference on Computers Helping People with Special Needs, 2016, Linz, Österreich, ISBN 978-3-319-41266-5, ISSN 0302-9743, DOI 10.1007/978-3-319-41267-2_84, Band Lecture Notes in Computer Sciences, Nr. 9759, Seiten 587--593, [BibTeX][Abstract][Paper]
J. Mayr, P. Blaser, W. Knapp, K. Wegener, Compensation of cutting fluid influences on five axis machine tools, MTTRF 2016 Annual Meeting, 2016, San Francisco, USA, [BibTeX][Abstract][Paper]
M. Warhanek, J. Pfaff, K. Wegener, DIPLAT – Ultrashort-Pulsed Lasers Applications for Ultrahard Tool Production, Industrial Technologies, 2016, Amsterdam, Niederlande, [BibTeX][Abstract]
M. Vetterli, R. Schmid, M. Schmid, T. Durand, S. Harke, K. Wegener, Autoklima Optimierung mittels SLS / Improving Car Climate Control with SLS, Rapid.Tech 2016, 2016, Erfurt, Deutschland, ISBN 978-3-446-45017-2, Seiten 370--379, [BibTeX][Abstract]
K. Wegener, F. Kuster, S. Weikert, L. Weiss, J. Stirnimann, Success Story Cutting, CIRP Conferenz on High Performance Cutting, 2016, Chemnitz, Deutschland, DOI 10.1016/j.procir.2016.04.110, Band 46, Seiten 512--524, [BibTeX][Abstract]
R. Voß, M. Henerichs, G. Capricano, F. Kuster, K. Wegener, Post-Coating Treatment of Cutting Edge for Drilling Carbon Fibre Reinforced Plastics (CRFP), CIRP Conference on High Performance Cutting, 2016, Chemnitz, Deutschland, DOI 10.1016/j.procir.2016.03.173, Band 46, Seiten 161--164, [BibTeX][Abstract]
F. Barata De Macedo, F. Kuster, K. Wegener, M. Wiessner, C. Hollenstein, Investigation of the Fundamentals of Tool Electrode Wear in Dry EDM, 7th HPC 2016 – CIRP Conference on High Performance Cutting, 2016, Chemnitz, Deutschland, DOI doi:10.1016/j.procir.2016.03.170, Band 46, Seiten 55--58, [BibTeX][Abstract][Paper]
M. Warhanek, J. Pfaff, P. Martin, L. Schönbächler, J. Boos, K. Wegener, Geometry optimization of polycrystalline diamond tools for the milling of sintered ZrO2, 7th HPC 2016 – CIRP Conference on High Performance Cutting, 2016, Chemnitz, Deutschland, DOI 10.1016/j.procir.2016.04.003, Band 46, Seiten 290--293, [BibTeX][Abstract][Paper]
J. Pfaff, M. Warhanek, S. Huber, T. Komischke, F. Hänni, K. Wegener, Laser Touch Dressing of Electroplated CBN Grinding Tools, 7th HPC 2016 – CIRP Conference on High Performance Cutting, 2016, Chemnitz, Deutschland, DOI 10.1016/j.procir.2016.04.012, Band Procedia CIRP, Nr. 46, Seiten 272--275, [BibTeX][Abstract]
F. Pavliček, Y. Beer, S. Weikert, J. Mayr, K. Wegener, Design of a Measurement Setup and First Experiments on the Influence of CO2-cooling on the Thermal Displacements on a Machine Tool, 7th HPC 2016 – CIRP Conference on High Performance Cutting, 2016, Chemnitz, Deutschland, [BibTeX][Abstract][Paper]
N. Schaal, K. Wegener, Comparison of ground and laser machined wiper geometry on carbide inserts for high performance fhinishing, 7th CIRP Conference on High Performance Cutting, 2016, Chemnitz, Deutschland, DOI 10.1016/j.procir.2016.03.166, Band 46, Seiten 623--626, [BibTeX][Abstract]
T. Haas, N. Lanz, R. Keller, S. Weikert, K. Wegener, Iterative Learning for Machine Tools Using a Convex Optimisation Approach, 7th HPC 2016 – CIRP Conference on High Performance Cutting, 2016, Chemnitz, Deutschland, DOI 10.1016/j.procir.2016.04.033, Band 46, Seiten 391--395, [BibTeX][Abstract][Paper]
M. Kuffa, F. Kuster, K. Wegener, Z. Simon, A Kinematic Process Model and Investigation of Surface Roughness for High Efficiency Dry Grinding, 7th HPC 2016 – CIRP Conference on High Performance Cutting, 2016, Chemnitz, Deutschland, DOI https://doi.org/10.1016/j.procir.2016.04.007, [BibTeX][Abstract][Paper]
H. Roelofs, N. Renaudot, D. Smolenicki, J. Boos, F. Kuster, The behaviour of graphitized steels in machining processes, THERMEC 2016, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS: Processing, Fabrication, Properties, Applications, 2016, Graz, Österreich, DOI 10.4028/www.scientific.net/MSF.879.1600, Band 879, Seiten 1600--1605, [BibTeX][Abstract]
D. Türk, R. Kussmaul, M. Zogg, C. Klahn, A. Spierings, H. Könen, P. Ermanni, M. Meboldt, ADDITIVE MANUFACTURING WITH COMPOSITES FOR INTEGRATED AIRCRAFT STRUCTURES, Society for the Advancement of Material and Process Engineering, 2016, Long Beach, CA, USA, DOI 10.3929/ethz-a-010691526, Seiten 15, [BibTeX][Abstract][Paper]
A. Kunz, M. Zank, M. Fjeld, T. Nescher, Real walking in virtual environments for factory planning and evaluation, 6th CIRP Conference on Assembly Technologies and Systems, 2016, Göteborg, Schweden, DOI 10.1016/j.procir.2016.02.086, Seiten 257--262, [BibTeX][Abstract][Paper]
C. Baumgart, B. Scheer, F. Kuster, Auslegung und Gestaltung der KSS-Zuführung beim Aussenrundschleifen, 11. Seminar Moderne Schleiftechnologie und Feinstbearbeitung, 2016, Stuttgart, Deutschland, [BibTeX][Abstract]
F. Barata De Macedo, F. Kuster, K. Wegener, M. Wiessner, C. Hollenstein, Dependence of Crater Formation in Dry EDM on Electrical Breakdown Mechanism, 18th CIRP Conference on Electro Physical and Chemical Machining, 2016, Tokyo, Japan, DOI doi:10.1016/j.procir.2016.02.212, Band 42, Seiten 161--166, [BibTeX][Abstract][Paper]
U. Maradia, M. Taborelli, J. Boos, H. Büttner, J. Stirnimann, M. Boccadoro, K. Wegener, Performance and limitations of the conventional electrode materials for erosion of high aspect ratio microcavities, 18th CIRP Conference on Electro Physical and Chemical Machining, 2016, Tokyo, Japan, DOI 10.1016/j.procir.2016.02.220, Band 42, Seiten 606--611, [BibTeX][Abstract]
M. Klyuev, U. Maradia, M. Boccadoro, R. Perez, J. Stirnimann, K. Wegener, Experimental Study of EDM-Drilling and Shaping of SiSiC and SiC, 18th CIRP Conference on Electro Physical and Chemical Machining, 2016, Tokyo, Japan, DOI 10.1016/j.procir.2016.02.269, Band 42, Seiten 191--196, [BibTeX][Abstract]
M. Klyuev, M. Boccadoro, R. Perez, B. Dal, J. Stirnimann, F. Kuster, K. Wegener, EDM Drilling and Shaping of Cooling Holes in Inconel 718 Turbine Blades, 18th CIRP Conference on Electro Physical and Chemical Machining, 2016, Tokyo, Japan, DOI 10.1016/j.procir.2016.02.293, Band 42, Seiten 322--327, [BibTeX][Abstract]
T. Nescher, M. Zank, A. Kunz, Simultaneous Mapping and Redirected Walking for ad hoc Free Walking in Virtual Environments, IEEE Virtual Reality, 2016, Greenville, USA, ISBN 978-1-5090-0836-0, ISSN 2375-5334, DOI 10.1109/VR.2016.7504742, Seiten 239--240, [BibTeX][Abstract][Paper]
M. Zank, A. Kunz, Eye Tracking for Locomotion Prediction in Redirected Walking, IEEE Symposium on 3D User Interfaces, 2016, Greenville, USA, ISBN 978-1-5090-0842-1, DOI 10.1109/3DUI.2016.7460030, Seiten 49--58, [BibTeX][Abstract][Paper]
S. Züst, F. Pavliček, L. Fischer, L. Weiss, K. Wegener, Macro-Models for Modeling and Simulation of Cooled Spindles, Special Interest Group Meeting: Thermal Issues, 17 - 18 March 2016, 2016, Prague, Tschechien, [BibTeX][Paper]
F. Pavliček, P. Hernández, J. Mayr, S. Weikert, S. Züst, K. Wegener, Influence of machine housing on the thermal TCP displacement, euspen - Special Interest Group Meeting: Thermal Issues, 2016, Prag, Tschechien, [BibTeX]
M. Warhanek, J. Pfaff, L. Meier, C. Walter, K. Wegener, Picosecond pulsed laser processing of polycrystalline diamond and cubic boron nitride composite materials, Photonics West, Laser-based Micro- and Nanoprocessing X, 2016, San Francisco, USA, DOI doi:10.1117/12.2212771, Band 9736, Nr. 1O, Seiten to appear, [BibTeX][Abstract]
M. Zank, L. Kern, A. Kunz, Improvements on a Novel Hybrid Tracking System, Proceedings of the 7th Augmented Human International Conference 2016, 2016, Genf, Schweiz, ISBN 978-1-4503-3680-2, DOI 10.1145/2875194.2875196, Seiten Article No. 22, [BibTeX][Abstract][Paper][Slides]
A. Kunz, M. Zank, T. Nescher, K. Wegener, Virtual reality based time and motion study with support for real walking, 49th CIRP Conference on Manufacturing Systems, 2016, Stuttgart, Deutschland, DOI 10.1016/j.procir.2016.11.053, Band 57, Seiten 303--308, [BibTeX][Abstract][Paper]
M. Engeler, D. Treyer, D. Zogg, K. Wegener, A. Kunz, Condition-based Maintenance: Model vs. Statistics A Performance Comparison, 49th CIRP Conference on Manufacturing Systems, 2016, Stuttgart, Deutschland, DOI 10.1016/j.procir.2016.11.044, Band 57, Seiten 253--258, [BibTeX][Abstract][Paper]
K. Wegener, A. Spierings, M. Schmid, Additive Manufacturing on the Way to industrialization, International Conference on Competitive Manufacturing, 2016, Stellenbosch, Südafrika, Seiten 11--22, [BibTeX]
C. Baumgart, G. Callejo, F. Kuster, K. Wegener, Optimierung der Kühlschmiermittelverteilung vor dem Schleifspalt beim Aussenrundschleifen, 1. Schweizer Schleif-Symposium, 2016, Zürich, Schweiz, [BibTeX][Abstract][Paper]
M. Warhanek, J. Pfaff, C. Walter, K. Rico, L. Meier, K. Wegener, Herstellung positiver Freiwinkel auf einschichtig galvanisch belegten Diamantwerkzeugen, Schweizer Schleifsymposium 2016, 2016, Zürich, Schweiz, Seiten to appear, [BibTeX][Abstract]
A. Kunz, K. Wegener, Die Mensch-Maschine-Schnittstelle als Schlüsselelement für VR/AR-Anwendungen, 3. Fachkonferenz zu VR/AR-Technologien in Anwendung und Forschung an der Professur für Werkzeugmaschinen und Umformtechnik, 2015, Chemnitz, Deutschland, DOI 10.3929/ethz-a-010561390, Seiten 17--26, [BibTeX][Abstract][Paper]
S. Imayasu, M. Röthlin, M. Akbari, N. Schaal, K. Wegener, Predicting the Springback of Metal Cutting Operations Using Mesh Free Methods, The 8th International Conference on Leading Edge Manufacturing in 21st Century, 2015, Kyoto, Japan, Seiten 4 (electronic proceeding), [BibTeX][Abstract][Paper]
K. Wegener, S. Weikert, J. Mayr, Age of Compensation - Challenge and Chance for Machine Tool Industry, 8th International Conference on Leading Edge Manufacturing in 21st Century, 2015, Kyoto, Japan, ISSN 1883-8022, 1881-7629, DOI 10.20965/ijat.issn.1883-8022, Seiten to appear, [BibTeX][Abstract]
M. Cloots, K. Kunze, K. Wegener, Vergleich von Textur und Mikrostruktur in IN738LC und Mar-M509 produziert mittels selektivem Laser-Schmelzen (SLM), Werkstoffwoche 2015, 2015, Dresden, Deutschland, [BibTeX][Abstract]
M. Zank, A. Kunz, Using Locomotion Models for Estimating Walking Targets in Immersive Virtual Environments, International Conference on Cyberworlds, 2015, Gotland, Schweden, ISBN 978-1-4673-9403-1/15, DOI 10.1109/CW.2015.20, Seiten 229--236, [BibTeX][Abstract][Paper]
D. Kono, P. Roh, A. Matsubara, Investigation on position dependency of tool-workpiece compliance, Proceedings of 38th International MATADOR, 2015, Yunlin, Taiwan, Seiten 293--297, [BibTeX][Abstract]
A. Yantaç, D. Çorlu, M. Fjeld, A. Kunz, Exploring Diminished Reality (DR) Spaces to Augment the Attention of Individuals with Autism, International Workshop on Diminished Reality as Challenging Issue in Mixed and Augmented Reality, 2015, Fukuoka, Japan, ISBN 978-1-4673-8471-1/15, DOI 10.1109/ISMARW.2015.21, Seiten 68--73, [BibTeX][Abstract][Paper][Slides]
M. Schmid, K. Wegener, Thermal and Molecular Properties of Polymer Powders for Selective Laser Sintering (SLS), Polymer Processing Society Conference 2015, 2015, Graz, Österreich, [BibTeX]
M. Vetterli, S. Raphael, M. Schmid, T. Durand, S. Harke, K. Wegener, Improving Energy Efficiency of Car Climate Control with SLS, Solid Freeform Symposium 2015, 2015, Austin TX, USA, ISSN 1053--2153, Seiten 1700--1708, [BibTeX][Abstract][Paper][Slides]
K. Ruhm, Measurement Plus Observation – A Modern Structure of Metrology, XXI International Measurement Confederation (IMEKO) World Congress, 2015, Prague, Tschechien, [BibTeX][Abstract][Paper][Slides]
K. Ruhm, The Signal Relation Diagram as a Metrological Tool – Elements And Synthesis, XXI International Measurement Confederation (IMEKO) World Congress, 2015, Prague, Tschechien, [BibTeX][Abstract][Paper][Slides]
A. Spierings, T. Bauer, K. Dawson, A. Colella, K. Wegener, PROCESSING ODS MODIFIED IN625 USING SELECTIVE LASER MELTING, Solid Freefrom Fabrication Symposium, 2015, Austin, TX, USA, Band 26, [BibTeX][Abstract][Paper]
T. Bauer, D. Karl, A. Spierings, K. Wegener, Microstructure and mechanical characterisation of SLM processed Haynes 230, Solid Freeform Fabrication Symposium, 2015, Austin (TX), USA, Seiten 813--822, [BibTeX][Abstract]
J. Mayr, M. Ess, F. Pavliček, S. Weikert, D. Spescha, W. Knapp, Simulation and measurement of environmental influences on machines in frequency domain, CIRP Annals - Manufacturing Technology, 2015, Kapstadt, Südafrika, [BibTeX][Abstract][Paper]
J. Mayr, W. Knapp, K. Wegener, Reduction Thermal Errors of 5-Axis Machine Tools, MTTRF Annual Meeting 2015, 2015, San Francisco, USA, [BibTeX][Abstract]
L. Fischer, S. vonArx, U. Wechsler, S. Züst, J. Worlitschek, Phase Change Dispersion, Potentially a New Class of Heat Transfer Fluids, 7th European Thermal-Sciences Conference, 19-23 June, 2015, Krakow, Polen, Seiten 1--8, [BibTeX]
N. Schaal, F. Kuster, K. Wegener, Springback in metal cutting with high cutting speeds, 15th CIRP Conference on Modelling of Machining Operations, 2015, DOI 10.1016/j.procir.2015.03.065, Band CIRP Procedia, Nr. 31, Seiten 24--28,, [BibTeX][Abstract][Paper]
P. Paul, S. Züst, F. Holzner, S. Bonanni, C. Rawlings, U. Dürig, K. Wegener, A. Knoll, Positioning for Thermal Scanning Probe Lithography, 15th International Conference of the European Society for Precision Engineering and Nanotechnology, 2015, Leuven, Niederlande, ISBN 978-0-9566790-7-9, Seiten 267--268, [BibTeX][Abstract]
F. Amado, M. Schmid, K. Wegener, Simulation of warpage induced by non-isothermal crystallization of co-Polypropylene during the SLS process, AIP Conf. Proc. 1664, 160002 (2015), 2015, Cleveland, Ohio, USA, ISBN 978-0-7354-1309-2, DOI 10.1063/1.4918509, Band 1664, Nr. 160002, [BibTeX][Abstract][Paper]
M. Schmid, F. Amado, K. Wegener, Polymer Powders for Selective Laser Sintering (SLS), AIP Conf. Proc. 1664, 160009 (2015), 2015, Cleveland OH, USA, ISBN 978-0-7354-1309-2, DOI 10.1063/1.4918516, Band 1664, Nr. 160009, [BibTeX][Abstract][Paper]
F. Pavliček, J. Mayr, S. Weikert, K. Wegener, Acclimatisation time of precise workpieces for quality inspection, euspen’s 15th International Conference & Exhibition, 2015, Leuven, Belgien, [BibTeX][Abstract][Paper]
J. Mayr, S. Weikert, K. Wegener, M. Egeter, Shop floor conditions versus precision on 5- axis machine tools, 11th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance, 2015, Huddersfield, Vereinigtes Königreich, ISBN 978-0-9566790-5-5, Seiten 299--308, [BibTeX][Paper]
H. Tanaka, R. Voß, M. Henerichs, K. Wegener, Machinability of thermo-plastic CFRP by inclined planetary milling, Proceedings of 38th International MATADOR, 2015, Yunlin, Taiwan, Seiten 298--303, [BibTeX][Abstract][Paper]
A. Alavi, A. Kunz, In-air Eyes-free Text Entry: A work in progress, Proceedings of the 4th IUI Workshop on Interacting with Smart Objects 2015, 2015, Atlanta, USA, DOI 10.3929/ethz-a-010412935, Seiten 24--27, [BibTeX][Abstract][Paper][Slides]
M. Zank, T. Nescher, A. Kunz, Tracking Human Locomotion by Relative Positional Feet Tracking, IEEE Virtual Reality 2015, 2015, Arles, Frankreich, ISSN 978-1-4799-1727-3, DOI 10.1109/VR.2015.7223423, Seiten 317--318, [BibTeX][Abstract][Paper][Slides]
G. Eberle, C. Dold, K. Wegener, Picosecond laser fabrication of micro cutting tool geometries on polycrystalline diamond composites using a high-numerical aperture micro scanning system, LASE - SPIE Photonics West, 2015, San Francisco, USA, DOI 10.1117/12.2075420, Seiten 935103-1--935103-9, [BibTeX][Abstract][Paper]
P. Börner, G. Zandonadi, G. Eberle, K. Wegener, Experimental and modelling investigations into the laser ablation with picosecond pulses at second harmonics, LASE - SPIE Photonics West, 2015, San Francisco, USA, DOI 10.1117/12.2076132, Seiten 935104-1--935104-13, [BibTeX][Abstract][Paper]
S. Thoma, T. Haas, H. Nguyên, S. Weikert, K. Wegener, In- and Cross-Talk Evaluation of Different Machine Concepts, 11th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance, 2015, Huddersfield, Vereinigtes Königreich, ISBN 978-0-9566790-5-5, Seiten 160--169, [BibTeX][Abstract][Paper]
M. Henerichs, R. Voß, D. Harsch, F. Kuster, K. Wegener, Tool Life Time Extension with Nano-Crystalline Diamond Coatings for Drilling Carbon-Fibre Reinforced Plastics (CFRP), New Production Technologies in Aerospace Industry - 5th Machining Innovations Conference, 2014, Hannover, Deutschland, DOI 10.1016/j.procir.2014.07.144, Band 24, Seiten 125--129, [BibTeX][Abstract][Paper]
M. Henerichs, R. Voß, H. Tanaka, F. Kuster, K. Wegener, Analysis of Material Weakening in CFRP after a Drilling Operation, New Production Technologies in Aerospace Industry - 5th Machining Innovations Conference, 2014, Hannover, Deutschland, DOI 10.1016/j.procir.2014.07.145, Band 24, Seiten 44--48, [BibTeX][Abstract][Paper]
A. Kunz, D. Schnelle-Walka, A. Alavi, S. Pölzer, M. Mühlhäuser, K. Miesenberger, Making Tabletop Interaction Accessible for Blind Users, Interactive Tabletops and Surfaces, 2014, Dresden, Deutschland, ISBN 978-1-4503-2587-5, DOI 10.1145/2669485.2669541, Seiten 327--332, [BibTeX][Abstract][Paper]
M. Zank, A. Kunz, Cost Based Estimation of Intended Locomotion Targets Using Human Locomotion Models, 20th ACM Symposium on Virtual Reality Software and Technology, 2014, Edinburgh, Vereinigtes Königreich, ISBN 978-1-4503-3253-8, DOI 10.1145/2671015.2671126, Seiten 217--218, [BibTeX][Abstract][Paper]
J. Mayr, C. Overlack, K. Wegener, Quality Control of mass‐produced Proton Exchange Membrane Fuel Cells, RA workshop, book of abstracts, 2014, Høgskole i Gjøvik, Finnland, ISBN 978-82-93269-58-8, Seiten 7-9, [BibTeX][Paper]
J. Um, A. Gontarz, I. Stroud, Developing energy estimation model based on Sustainability KPI of machine tools, 12th Global Conference on Sustainable Manufacturing, 2014, Johor Bahru, Malaysia, DOI 10.1016/j.procir.2015.03.002, Band 26, Seiten 217--222, [BibTeX][Abstract]
A. Gontarz, T. Schudeleit, K. Wegener, Framework of a Machine Tool Configurator for Energy Efficiency, 12th Global Conference on Sustainable Manufacturing GCSM 2014, 2014, Johor Bahru, Malaysia, DOI 10.1016/j.procir.2014.07.185, Band 26, Seiten 706--711, [BibTeX][Abstract]
A. Gontarz, D. Hampl, L. Weiss, K. Wegener, Resource Consumption Monitoring in Manufacturing Environments, 12th Global Conference on Sustainable Manufacturing GCSM 2014, 2014, Johor Bahru, Malaysia, DOI 10.1016/j.procir.2014.07.098, Band 26, Seiten 264--269, [BibTeX][Abstract]
G. Eberle, K. Wegener, Ablation study of WC and PCD composites using 10 picosecond and 1 nanosecond pulse durations at green and infrared wavelengths, 8th International Conference on Laser Assisted Net Shape Engineering, 2014, Fürth, Deutschland, DOI 10.1016/j.phpro.2014.08.115, Band 56, Seiten 951--962, [BibTeX][Abstract][Paper]
J. Monnin, F. Kuster, K. Wegener, Modelling Errors influencing Active Structural Methods for Chatter Mitigation in Milling Process, Procedia CIRP, 2014, University of California, Berkeley, USA, Band 14, Nr. 1, Seiten 494--499, [BibTeX]
D. Smolenicki, J. Boos, F. Kuster, H. Roelofs, C. Wyen, In-Process measurement of friction coefficient in orthogonal cutting, CIRP Annals - Manufacturing Technology, Band 63, Nr. 1, 2014, Nantes, Frankreich, DOI 10.1016/j.cirp.2014.03.083, Seiten 97 - 100, [BibTeX][Abstract][Paper]
M. Gebhardt, J. Mayr, N. Furrer, T. Widmer, S. Weikert, W. Knapp, High precision grey-box model for compensation of thermal errors on 5-axis machine tools, CIRP Annals - Manufacturing Technology, 2014, Nantes, Frankreich, DOI 10.1016/j.cirp.2014.03.083, Band 63, Nr. 1, Seiten 509--512, [BibTeX][Abstract][Paper]
A. Kunz, K. Miesenberger, Accessibility of Non-verbal Communication Introduction to the Special Thematic Session, 14th International Conference on Computers Helping People with Special Needs, 2014, Paris, Frankreich, ISBN 978-3-319-08596-8, DOI 10.1007/978-3-319-08596-8, Band LNCS, Nr. 8547, Seiten 205--208, [BibTeX][Abstract][Paper]
A. Kunz, K. Miesenberger, M. Mühlhäuser, A. Alavi, S. Pölzer, D. Pöll, P. Heumader, D. Schnelle-Walka, Accessibility of Brainstorming Sessions for Blind People, 14th International Conference on Computers Helping People with Special Needs, 2014, Paris, Frankreich, ISBN 978-3-319-08596-8, DOI 10.1007/978-3-319-08596-8, Band LNCS, Nr. 8547, Seiten 237--244, [BibTeX][Abstract][Paper][Video]
D. Schnelle-Walka, A. Alavi, P. Ostie, M. Mühlhäuser, A. Kunz, A Mind Map for Brainstorming Sessions with Blind and Sighted Persons, 14th International Conference on Computers Helping People with Special Needs, 2014, Paris, Frankreich, ISBN 978-3-319-08596-8, DOI 10.1007/978-3-319-08596-8, Band LNCS, Nr. 8547, Seiten 214--219, [BibTeX][Abstract][Paper][Video]
C. Walter, T. Komischke, E. Weingärtner, K. Wegener, Structuring of CBN grinding tools by ultrashort pulse laser ablation, 6th CIRP International Conference on High Performance Cutting, 2014, University of California, Berkley, USA, DOI 10.1016/j.procir.2014.03.093, Band 14, Nr. 1, Seiten 31--36, [BibTeX][Abstract]
J. Monnin, F. Kuster, K. Wegener, Modeling Errors influencing Active Structural Methods for Chatter Mitigation in Milling Process, 6th CIRP International Conference on High Performance Cutting, 2014, Zurich, Schweiz, DOI 10.1016/j.procir.2014.03.037, Band 14, Nr. 1, Seiten 494--499, [BibTeX][Abstract][Paper]
U. Maradia, R. Knaak, J. Boos, M. Boccadoro, J. Stirnimann, K. Wegener, Economic and energy efficiencies in meso-micro EDM, Proceedings of the 14th euspen International Conference, 2014, Dubrovnik, Kroatien, Band 2, Seiten 35--38, [BibTeX][Abstract][Paper]
S. Züst, A. Gontarz, F. Pavliček, J. Mayr, K. Wegener, Model based prediction approach for internal machine tool heat sources on the level of subsystems, 3rd CIRP Global Web Conference - Production Engineering Research - Advancement beyond state of the art, 2014, Italien, ISSN 2212-8271, DOI 10.1016/j.procir.2015.04.006, Band 28, Seiten 28--33, [BibTeX][Abstract]
C. Walter, T. Komischke, P. Beyer, K. Wegener, A laser micro texturing technique for performance enhancement of superabrasive grinding wheels, Proceedings of the 14th euspen International Conference, 2014, Dubrovnik, Kroatien, ISBN 978-0-9566790-3-1, DOI 10.13140/2.1.1972.2880, Band 2, Seiten 243--246, [BibTeX]
M. Gebhardt, J. Mayr, W. Knapp, K. Wegener, Thermal issues in 5-axis machine tools, MTTRF 2013 Annual Meeting, 2014, San Fancisco, USA, [BibTeX][Abstract]
M. Gebhardt, J. Mayr, P. Blaser, W. Knapp, K. Wegener, Thermal Compensation for 5-Axis Machine Tools with Physical Model, 14th euspen International Conference, 2014, Dubrovnik, Kroatien, Nr. 2, Seiten 323-326, [BibTeX][Abstract]
J. Mayr, M. Gebhardt, B. Massow, S. Weikert, K. Wegener, Cutting fluid influence on thermal behavior of 5-axis machine tools, 6th CIRP HPC, 2014, Berkeley, USA, Seiten 395-400, [BibTeX][Abstract]
F. Kuster, N. Jochum, Schleifen ultraharter Keramik am Beispiel einer dreigliedrigen Zahnbrücke, Moderne Schleiftechnologie und Feinstbearbeitung 2014, 10. Seminar "Moderne Schleiftechnologie und Feinstbearbeitung", 2014, Stuttgart, Deutschland, ISBN 978-3-8027-2979-9, Seiten 17-1 --17-17, [BibTeX][Abstract][Paper]
R. Voß, M. Henerichs, F. Kuster, K. Wegener, Chip Root Analysis after Machining Carbon Fiber Reinforced Plastics (CFRP) at Different Fiber Orientations, 6th CIRP International Conference on High Performance Cutting, 2014, Berkeley, USA, ISSN 2212-8271, DOI 10.1016/j.procir.2014.03.013, Band 14, Seiten 217--222, [BibTeX][Abstract][Paper]
C. Bayley, L. Bochmann, C. Hurlbut, M. Helu, R. Transchel, D. Dornfeld, Understanding Error Generation in Fused Deposition Modeling, 2014 ASPE Spring Topical Meeting, 2014, USA, Seiten 98--103, [BibTeX][Abstract][Paper]
C. Walter, M. Warhanek, K. Wegener, Advanced functionalities of Diamond and other ultrahard materials, Industrial Technologies Conference 2014, 2014, Athens, Griechenland, [BibTeX][Abstract]
M. Henerichs, R. Voß, S. Übelin, K. Wegener, Analyse von Werkstoffschäden in gewebeartig gelegtem CFK-Material nach einer Bohrbearbeitung, Innovations of Sustainable Production for Green Mobility Energy-Efficient Technologies in Production Part 1 : 3rd International Chemnitz Manufacturing Colloquium ICMC 2014, 2014, Chemnitz, Deutschland, ISBN 978-3-95735-004-6, Seiten 701--718, [BibTeX][Paper]
H. Roelofs, M. Lembke, D. Smolenicki, J. Boos, F. Kuster, Continuously cooled bainitic steels with improved machinability, 1st European Steel Technology & Application Days & 31st Journées Sidérurgiques Internationales, 2014, Paris, Frankreich, Band 1, Seiten 261-262, [BibTeX][Abstract]
M. Wiessner, M. Gebhardt, W. Knapp, K. Wegener, Test piece for visualization of thermally induced deviations on five-axis machine tools, euspen – Special Interest Group Meeting: Thermal Issues, 2014, Zürich, Schweiz, [BibTeX][Abstract][Paper]
T. Nescher, Y. Huang, A. Kunz, Planning Redirection Techniques for Optimal Free Walking Experience Using Model Predictive Control, IEEE 9th Symposium on 3D User Interfaces, 2014, Minneapolis, USA, DOI 10.1109/3DUI.2014.6798851, Seiten 111--118, [BibTeX][Abstract][Paper][Video]
A. Kunz, A. Alavi, P. Sinn, Integrating Pointing Gesture Detection for enhancing Brainstorming Meetings using Kinect and PixelSense, 8th International Conference on Digital Enterprise Technology, 2014, Stuttgart, Deutschland, DOI 10.1016/j.procir.2014.10.031, Seiten 205--212, [BibTeX][Abstract][Paper]
P. Blaser, M. Gebhardt, W. Knapp, K. Wegener, Automatic Compensation of Thermally Induced Errors on Five-Axis Machine Tools, euspen, Thermal Issues 2014, 2014, Zürich, Schweiz, [BibTeX]
M. Vetterli, M. Schmid, K. Wegener, Comprehensive Investigation of Surface Characterization Methods for Laser Sintered Parts, Fraunhofer Direct Digital Manufacturing Conference 2014, 2014, Berlin, Deutschland, ISBN 978-3-8396-9128-1, Seiten 1--6, [BibTeX][Abstract][Paper][Slides]
G. Eberle, B. Benjamin, K. Wegener, Focal length stabilization of a tunable lens integrated focus shifting unit, LASE - SPIE Photonics West, 2014, San Francisco, USA, DOI 10.1117/12.2035104, Seiten 89670G-1--89670G-9, [BibTeX][Abstract]
K. Wegener, Herausforderung Fertigungstechnik Aktuelle Trends, 2. SMM-Kongress, 2013, Luzern, Schweiz, [BibTeX]
U. Maradia, K. Wegener, J. Stirnimann, R. Knaak, M. Boccadoro, Investigation of the scaling effects in meso-micro EDM, Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, 2013, San Diego, California, USA, DOI 10.1115/IMECE2013-63160, [BibTeX][Abstract]
M. Henerichs, C. Dold, R. Voß, K. Wegener, Performance of Lasered PCD-and CVD-Diamond Cutting Inserts for Machining Carbon Fiber Reinforced Plastics (CFRP), ASME 2013 International Mechanical Engineering Congress and Exposition, 2013, San Diego, USA, DOI 10.1115/IMECE2013-62675, Seiten V02BT02A064--V02BT02A072, [BibTeX][Abstract][Paper]
M. Cloots, A. Spierings, K. Wegener, Thermomechanisches Multilayer-Modell zur Simulation von Eigenspannungen in SLM-Proben, Simlationsforum 2013 - Schweißen und Wärmebehandlung, 2013, Weimar, Deutschland, ISBN 978-3-00-045902-3, Seiten 11, [BibTeX][Abstract][Paper]
M. Zank, T. Nescher, A. Kunz, Robust Prediction of Auditory Step Feedback for Forward Walking, 19th ACM Symposium on Virtual Reality Software and Technology, 2013, Singapur, Singapur, ISBN 978-1-4503-2379-6, DOI 10.1145/2503713.2503735, Seiten 119--122, [BibTeX][Abstract][Paper]
M. Schmid, G. Levy, F. Amado, K. Wegener, Flowability of Powders for Selective Laser Sintering (SLS) investigated by Round Robin Test, International Conference on Advanced Research in Virtual and Rapid Prototyping, 2013, Leiria, Portugal, ISBN 978-1-138-00137-4, 978-1-315-81741-5, DOI 10.1201/b15961-19, Seiten 95--99, [BibTeX][Abstract][Paper]
J. Larreina, A. Gontarz, V. Nguyen, C. Giannoulis, B. Sinceri, P. Stavropoulos, Smart Manufacturing Execution System (SMES): The Possibilities to evaluate the Sustainability of a Production Process, 11th Global Conference on Sustainable Manufacturing,, 2013, Berlin, Deutschland, ISBN 9798-3-7983-2606-4, [BibTeX][Abstract]
K. Wegener, S. Jaumann, Planar Guided Milling Machine, Combination of High Speed and Precision, 10th High Speed MAchining Conference 2013, Darmstadt 26th to 27th September 2013, 2013, Darmstadt, Deutschland, Seiten 238--250, [BibTeX][Abstract][Slides]
S. Züst, A. Gontarz, K. Wegener, Energy Equivalent of Compressed Air Consumption in a Machine Tool Environment, 11th Global Conference on Sustainable Manufacturing, 2013, Berlin, Deutschland, ISBN 9798-3-7983-2606-4, Seiten 394--399, [BibTeX][Abstract]
M. Gebhardt, A. Schneeberger, S. Capparelli, W. Knapp, K. Wegener, Messtechnische Charakterisierung thermisch bedingter Abweichungen von 5-Achs Werkzeugmaschinen, XXVII. Messtechnisches Symposium des Arbeitskreises der Hochschullehrer für Messtechnik e.V., 2013, Zürich, ISBN 978-3-8440-2124-0, Seiten 25-36, [BibTeX]
M. Cloots, A. Spierings, K. Wegener, Assessing New Support Minimizing Strategies for the Additive Manufacturing Technology SLM, International Solid Freeform Fabrication Symposium, 2013, Austin, TX, USA, Seiten 631--643, [BibTeX][Abstract][Paper]
A. Spierings, T. Starr,, K. Wegener, Fatigue performance of Additive Manufactured metallic Parts, Rapid Prototyping Journal, 2013, Vereinigtes Königreich, ISSN 1355-2546, DOI 10.1108/13552541311302932, Band 19, Nr. 2, Seiten 88--94, [BibTeX][Abstract]
S. Buhl, M. Röthlin, K. Wegener, R. Niklaus, Simulation of hexa-octahedral diamond grain cutting tests using the SPH method, 14th CIRP Conference on Modeling of Machining Operations (CIRP CMMO), 2013, Turin, Italien, DOI 10.1016/j.procir.2013.06.110, Band 8, Seiten 322-327, [BibTeX][Abstract][Paper]
M. Gebhardt, A. Schneeberger, W. Knapp, K. Wegener, Measuring, modeling and compensating thermally caused location errors of rotary axes, The Proceedings of Machine Tools Technology Reasearch Foundation 2013 Meeting, 2013, San Francisco, USA, Seiten 19--24, [BibTeX][Abstract]
A. Gontarz, P. Bosshard, L. Weiss, Compressed air system assessment for machine tool monitoring, Proceedings of the 2nd international conference on Sustainable Intelligent Manufacturing, 2013, Lissabon, Portugal, ISBN 978-1-138-00046-9, Seiten 173--178, [BibTeX][Abstract]
A. Kunz, A. Alavi, J. Landgren, A. Yantaç, P. Wozniak, Z. Sárosi, M. Fjeld, Tangible Tabletops for Emergency Response: An Exploratory Study, International Conference on Multimedia, Interaction, Design and Innovation, 2013, Warschau, Polen, ISBN 978-1-4503-2303-1, DOI 10.1145/2500342.2500352, Seiten 1--8, [BibTeX][Abstract][Paper]
G. Heinecke, S. Lamparter, R. Lepratti, A. Kunz, Advanced Supply Chain Information for Rule-Based Sequence Adaptions on a Mixed-Model Assembly Line with Unreliable Just-In-Sequence Deliveries, IFAC Conference on Manufacturing Modelling, Management, and Control 2013, 2013, St. Petersburg, Russland, DOI 10.3182/20130619-3-RU-3018.00095, Band 7, Seiten 1902--1907, [BibTeX][Abstract][Paper]
D. Chen, T. Schudeleit, S. Thiede, G. Posselt, A State-of-the-art Review and Evaluation of Tools for Factory Sustainability Assessment, 2nd CIRP Global Web Conference - Beyond modern manufacturing: Technology for the factories of the future (CIRPe2013), 2013, DOI 10.1016/j.procir.2013.06.173, Seiten 85 -- 90, [BibTeX][Abstract][Paper]
K. Deibel, K. Wegener, Methodology for Shape Optimization of Ultrasonic Amplifier using Genetic Algorithms and Simplex Method, Proceedings of the North American Manufacturing Research Institution of SME, 2013, Madison, Wisconsin, USA, ISBN 087263874-x, ISSN 2161-220X, Band 41, [BibTeX][Abstract]
U. Maradia, R. Knaak, J. Boos, M. Boccadoro, J. Stirnimann, K. Wegener, EDM process analysis using high-speed imaging, 13th International Conference of the European Society for Precision Engineering & Nanotechnology, 2013, Berlin, Deutschland, Band 2, Seiten 39--42, [BibTeX][Abstract][Paper]
M. Gebhardt, S. Capparelli, M. Ess, W. Knapp, K. Wegener, Physical and phenomenological simulation models for the thermal compensation of rotary axes of machine tools, 13th International Conference of the European Society for Precision Engineering & Nanotechnology, 2013, Berlin, Deutschland, ISBN 978-0-9566790-2-4, Nr. 1, Seiten 304--309, [BibTeX][Abstract]
G. Eberle, C. Vincent, K. Wegener, Simulation and Realization of a Focus Shifting Unit using a Tunable Lens for 3D Laser Material Processing, Lasers in Manufacturing, 2013, München, Deutschland, DOI 10.1016/j.phpro.2013.03.100, Band 41, Seiten 441--447, [BibTeX][Abstract][Paper]
F. Amado, M. Schmid, K. Wegener, Flowability of SLS powders at elevated temperature, 10th Rapid Tech Conference 2013, 2013, Erfurt, Deutschland, [BibTeX]
S. Davud, B. Migge, G. Roger, K. Yeongmi, Prototype Of A VR Upper-limb Rehabilitation System Enhanced With Motion-based Tactile Feedback, IEEE World Haptics Conference 2013, 2013, Daejeon, Republik Korea, ISBN 978-1-4799-0087-9, DOI 10.1109/WHC.2013.6548450, Seiten 449--454, [BibTeX][Abstract]
R. Roth, F. Kuster, K. Wegener, Influence of Oxidizing Gas on the Stability of Dry Electrical Discharge Machining Process, Seventeenth CIRP Conference on Electro Physical and Chemical Machining, 2013, Leuven, Belgien, DOI http://dx.doi.org/10.1016/j.procir.2013.03.029, Band 6, Seiten 338–343, [BibTeX][Abstract]
C. Dold, M. Henerichs, P. Gilgen, K. Wegener, Laser Processing of Coarse Grain Polycrystalline Diamond (PCD) Cutting Tool Inserts using Picosecond Laser Pulses, Lasers in Manufacturing, 2013, München, Deutschland, DOI 10.1016/j.phpro.2013.03.123, Band 41, Seiten 610--616, [BibTeX][Abstract]
U. Maradia, M. Scuderi, R. Knaak, M. Boccadoro, I. Beltrami, J. Stirnimann, K. Wegener, Super-finished Surfaces using Meso-micro EDM, Proceedings of the Seventeenth CIRP Conference on Electro Physical and Chemical Machining, 2013, Leuven, Belgien, DOI 10.1016/j.procir.2013.03.076, Band 6, Seiten Pages 157--162, [BibTeX][Abstract]
S. Chen, M. Chen, A. Kunz, A. Yantaç, M. Bergmark, A. Sundin, M. Fjeld, SEMarbeta: Mobile Sketch-Gesture-Video Remote Support for Car Drivers, 4th Augmented Human International Conference, 2013, Stuttgart, Deutschland, ISBN 978-1-4503-1904-1, DOI 10.1145/2459236.2459249, Seiten 69 -- 76, [BibTeX][Abstract][Paper][Slides][Video]
C. Dold, C. Gsell, K. Wegener, Ultrakurzpulsbearbeitung von Hochleistungswerkstoffen, 16. Laser in der Elektronikproduktion & Feinwerktechnik, 2013, Fürth, Deutschland, ISBN 978-3-87525-343-6, Band 1, Seiten 155--167, [BibTeX][Abstract]
A. Gontarz, C. Elbe, L. Weiss, K. Wegener, Standby Indication and Energy Management on Machine Tools (Poster), ICT for Sustainability - The Challenge of Making It Real, 2013, Zurich, Schweiz, DOI http://dx.doi.org/10.3929/ethz-a-007337628, [BibTeX]
A. Kunz, K. Wegener, Towards natural user interfaces in VR/AR for Design and Manufacturing, 2. Fachkonferenz zu VR/AR-Technologien an der Professur für Werkzeugmaschinen und Umformtechnik der TU Chemnitz, 2013, Chemnitz, Deutschland, ISBN 978-3-942267-66-3, Seiten 23--34, [BibTeX][Abstract][Paper]
K. Deibel, J. Boos, K. Wegener, Friction Effects between Ultrasonic Cutting Blade and Sheet Stack, 2012 IEEE International Ultrasonics Symposium, 2013, Dresden, Deutschland, ISBN 978-1-4673-4561-3, ISSN 1051-0117, DOI 10.1109/ULTSYM.2012.0667, Seiten 2663--2666, [BibTeX][Abstract][Paper]
K. Deibel, J. Boos, S. Weikert, K. Wegener, Correlation of Cutting Force and Power Consumption for Ultrasonic-Vibration-Assisted Cutting of Label Paper Stacks, ASME 2012 International Mechanical Engineering Congress & Exposition, 2013, Houston, USA, ISBN 978-0-7918-4519-6, DOI 10.1115/IMECE2012-85407, Band 3, Nr. A, B, C, Seiten 1421--1428, [BibTeX][Abstract][Paper]
A. Almeida, D. Politze, A. Caldas, A. Azevedo, Linking Strategic Goals with Operational Performance: An Integrated Approach, The IEEE International Conference on Industrial Engineering and Engineering Management, 2012, Hong Kong, [BibTeX][Abstract]
K. Wegener, C. Dold, M. Henerichs, C. Walter, Laser prepared cutting tools, Laser Assisted Netshape Engineering / Physics Procedia, 2012, Fürth, Deutschland, ISSN 1875-3892, DOI 10.1016/j.phpro.2012.10.035, Band 39, Seiten 240--248, [BibTeX][Abstract][Paper]
A. Gontarz, J. Plehn, A. Sproedt, L. Weiss, K. Wegener, Resource consumption measurement in manufacturing environments, 10th Global Conference on Sustainable Manufacturing, 2012, Istanbul, Türkei, ISBN 978-605-63463-0-9, Seiten 557--563, [BibTeX][Abstract]
J. Plehn, A. Sproedt, A. Gontarz, J. Reinhard, From Strategic Goals to focused Eco-efficiency Improvement in Production - Bridging the gap using Environmental Value Stream Mapping, 10th Global Conference on Sustainable Manufacturing, 2012, Istanbul, Türkei, ISBN 978-605-63463-0-9, Seiten 551--556, [BibTeX][Abstract]
A. Gontarz, S. Züst, L. Weiss, K. Wegener, Energetic machine tool modeling approach for energy consumption prediction, 10th Global Conference on Sustainable Manufacturing, 2012, Istanbul, Türkei, ISBN 978-605-63463-0-9, Seiten 652--658, [BibTeX][Abstract]
F. Sellmann, S. Weikert, K. Wegener, Model based calculation of the tool-path smoothing tolerance, Annual Meeting of the American Society for Precision Engineering, 2012, San Diego, USA, ISBN 978-1-887706-61-2, Seiten 177--179, [BibTeX][Paper][Slides]
H. Nguyên, S. Weikert, K. Wegener, Evaluation Method of Acceleration Correlated Position Errors in Machine Tools, Annual Meeting of the American Society for Precision Engineering, 2012, San Diego, USA, ISBN 978-1-887706-61-2, Seiten 506--509, [BibTeX]
S. Jaumann, K. Wegener, PRÄZOPLAN Die aerostatisch flächig geführte Hochpräzisionsfräsmaschine, Wiener Produktionstechnik Kongress 2012, 2012, Wien, Österreich, ISBN 978-3-7083-0872-2, Band 1, Seiten 115--124, [BibTeX][Abstract]
K. Wegener, E. Weingärtner, C. Walter, C. Dold, Alternative Konditionierverfahren für Hochleistungsschleifscheiben, Wiener Produktionstechnik Kongress 2012, 2012, Wien, Österreich, ISBN 978-3-7083-0872-2, Band 1, Seiten 41--50, [BibTeX][Abstract][Paper]
C. Vögtlin, G. Schulz, H. Deyhle, K. Jäger, T. Liebrich, S. Weikert, B. Müller, Comparison of denture models by means of micro computed tomography, Developments in X-Ray Tomography VIII, Proceedings of SPIE Volume 8506, 2012, San Diego, USA, [BibTeX]
O. Schlatter, B. Migge, A. Kunz, User-aware Content Orientation on Interactive Tabletop Surfaces, 2012 International Conference on Cyberworlds, 2012, Darmstadt, Deutschland, ISBN 978-0-7695-4814-2/12, DOI 10.1109/CW.2012.43, Seiten 246--250, [BibTeX][Abstract][Paper][Video]
B. Migge, A. Kunz, Interaction Prediction for Content Synchronization of Net-based Shared Workspaces, 2012 International Conference on Cyberworlds, 2012, Darmstadt, Deutschland, ISBN 978-0-7695-4814-2/12, DOI 10.1109/CW.2012.42, Seiten 241--245, [BibTeX][Abstract][Paper]
T. Nescher, A. Kunz, Analysis of Short Term Path Prediction of Human Locomotion for Augmented and Virtual Reality Applications, 2012 International Conference on Cyberworlds, 2012, Darmstadt, Deutschland, ISBN 978-0-7695-4814-2/12, DOI 10.1109/CW.2012.10, Seiten 15--22, [BibTeX][Abstract][Paper]
T. Liebrich, W. Knapp, K. Wegener, Realisierung und Überprüfung eines 3D-Tastsystems für Mikro-Bauteile, XXVI. Messtechnische Symposium des Arbeitskreises der Hochschullehrer für Messtechnik, 2012, Aachen, Deutschland, ISBN 978-3-8440-1312-2, Seiten 81--92, [BibTeX][Paper]
F. Sellmann, S. Weikert, K. Wegener, Improvement of the dynamic behavior of machine tools by geometrical optimization of the machine tool axes movement, 13th Mechatronics Forum Biennial International Conference, 2012, Linz, Österreich, ISBN 978-3-99033-046-3, Band 1/3, Seiten 315--320, [BibTeX][Abstract]
R. Carbini, K. Wegener, S. Weikert, H. Hagenbuch, Effective Compensation of Higher Order Harmonics of a Servo-Hydraulic Test Shaker, 13th Mechatronics Forum Biennial International Conference, 2012, Linz, Österreich, ISBN 978-3-99033-046-3, Band 2/3, Seiten 460--461, [BibTeX][Paper]
M. Ess, J. Mayr, K. Wegener, S. Weikert, Dynamic Loads and Thermal Errors on Machine Tools, 13th Mechatronics Forum Biennial International Conference, 2012, Linz, Österreich, ISBN 978-3-99033-046-3, Band 1/3, Seiten 310--314, [BibTeX][Abstract]
S. Thoma, K. Wegener, S. Weikert, Comparison of compensation strategies of structural effects, 13th Mechatronics Forum Biennial International Conference, 2012, Linz, Österreich, ISBN 978-3-99033-046-3, Band 1/3, Seiten 248--253, [BibTeX][Abstract][Paper]
F. Amado, M. Schmid, L. G., K. Wegener, Characterization and modeling of non-isothermal crystallization of Polyamide 12 and co-Polypropylene during the SLS process, 5th International Polymers & Moulds Innovations Conference, 2012, Ghent, Belgien, Seiten 207--216, [BibTeX][Abstract][Paper]
M. Schmid, F. Woellecke, G. Levy, Long-Term Durability of SLS Polymer components under Automotive Application Environment, 23rd Annual International SFF Symposium - An Additive Manufacturing Conference, 2012, Austin (TX), USA, [BibTeX][Abstract][Paper]
J. Hentz, V. Nguyen, D. Panarese, J. Gunnink, A. Gontarz, P. Stravropoulos, K. Hamilton, J. Hascoët, An enabling digital foundation towards smart machining, 8th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 2012, Ischia, Italien, [BibTeX]
U. Maradia, M. Boccadoro, J. Stirnimann, I. Beltrami, F. Kuster, K. Wegener, Die-sink EDM in meso-micro machining, Proceedings of 5th CIRP International Conference on High Performance Cutting, 2012, Zürich, Schweiz, DOI http://dx.doi.org/10.1016/j.procir.2012.04.029, Band 1, Seiten 166--171, [BibTeX][Abstract]
E. Weingärtner, F. Kuster, K. Wegener, Modeling and simulation of wire electrical discharge machining, 1st CIRP Global Web Conference: Interdisciplinary Research in Production Engineering, 2012, Web, ISSN ISSN 2212-8271, DOI 10.1016/j.procir.2012.05.043, Band 2, Seiten 74--78, [BibTeX][Abstract]
J. Köber, G. Heinecke, Segmentation and Evaluation of the Order-to-Delivery Process of Agricultural Machinery, 4th Production and Operations Management World Conference, 2012, Amsterdam, Niederlande, ISBN 978-9-4916-2100-0, [BibTeX][Abstract][Paper]
G. Heinecke, B. Migge, A. Kunz, S. Lamparter, R. Lepratti, Measuring the performance-related effect of supply chain events on manufacturing operations, P&OM World Conference 2012, 2012, Amsterdam, Niederlande, ISBN 978-9-4916-2100-0, DOI 10.3929/ethz-a-007349852, [BibTeX][Abstract][Paper]
M. Gebhardt, W. Knapp, K. Wegener, 5-Axis Test-Piece – Influence of Machining Position, Machine Tool Technologies Research Foundation (MTTRF), 2012, Iga City, Japan, Seiten 299--304, [BibTeX]
R. Roth, H. Balzer, F. Kuster, K. Wegener, Influence of the Anode Material on the Breakdown Behavior in Dry Electrical Discharge Machining, 5th CIRP Conference on High Performance Cutting 2012, 2012, Zürich, Schweiz, DOI http://dx.doi.org/10.1016/j.procir.2012.05.013, Band 1, Seiten 639–-644, [BibTeX][Abstract]
M. Gebhardt, v. Cube, W. Knapp, K. Wegener, Measurement set ups and cycles for thermal characterization of axes of rotation, 12th International Conference of the European Society for Precision Engineering & Nanotechnology, 2012, Stockholm, Schweden, ISBN 978-0-9566790-0-0, Band 1, Seiten 486--489, [BibTeX][Abstract]
S. Thoma, S. Weikert, K. Wegener, Comparison of compensation strategies of structural effects, EUSPEN International Conference- Stockholm, 2012, Stockholm, Schweden, ISBN 978-0-0956790-0-0, Band 1/2, Seiten 511--514, [BibTeX][Abstract][Paper]
D. Smolenicki, J. Boos, F. Kuster, K. Wegener, Analysis of the chip formation of bainitic steel in the drilling process, HPC 2012 (CIRP), Pages 683 - 684, 2012, IWF - ETH Zürich, Schweiz, [BibTeX][Abstract]
M. Ess, J. Mayr, S. Weikert, K. Wegener, An Energy Model for the Calculation of Losses and their Effects on Machining Accuracy, EUSPEN International Conference- Stockholm, 2012, Stockholm, Schweden, ISBN 978-0-0956790-0-0, Band 1/2, Seiten 515--518, [BibTeX]
S. Thoma, S. Weikert, Compensation strategies for axis coupling effects, Fifth CIRP Conference on High Performance Cutting 2012, 2012, Zürich, Schweiz, Band Vol.1, Seiten 255--259, [BibTeX][Abstract][Paper]
C. Dold, M. Henerichs, L. Bochmann, K. Wegener, Comparison of ground and laser machined polycrystalline diamond (PCD) tools in cutting carbon fiber reinforced plastics (CFRP) for aircraft structures, 5th CIRP Conference on High Performance Cutting, 2012, Zurich, Schweiz, DOI 10.1016/j.procir.2012.04.031, Band 1, Seiten 178--183, [BibTeX][Abstract][Paper]
J. Köber, G. Heinecke, Hybrid Production Strategy Between Make-to-Order and Make-to-Stock – A Case Study at a Manufacturer of Agricultural Machinery with Volatile and Seasonal Demand, 45th CIRP Conference on Manufacturing Systems, 2012, Athen, Griechenland, ISSN 2212-8271, DOI 10.1016/j.procir.2012.07.078, Band 3, Seiten 453-458, [BibTeX][Abstract][Paper]
M. Cloots, A. Spierings, Entwicklung von Prozessparametern zur additiven Fertigung von Bauteilen hergestellt aus der Nickelbasislegierung IN738LC unter Verwendung von SLM, Rapid.Tech, 2012, Erfurt, Deutschland, [BibTeX]
A. Steinemann, J. Taiber, G. Fadel, K. Wegener, A. Kunz, Adapting Discrete-Event Simulation Tools to Support Tactical Forecasting in the Automotive Industry, Ninth International Symposium on Tools and Methods of Competitive Engineering, 2012, Karlsruhe, Deutschland, ISBN 978-90-5155-082-5, Seiten 319--332, [BibTeX][Abstract][Paper]
K. Wegener, E. Weingärtner, C. Walter, C. Dold, J. Stirnimann, Konditionieren von Schleifscheiben mit Licht und Strom, 9. Moderne Schleiftechnologie und Feinstbearbeitung, 2012, Stuttgart, Deutschland, Seiten 16-1--16-25, [BibTeX][Abstract]
A. Steinemann, S. Wampfler, T. Kennel, A. Kunz, Definition and Analysis of a Lean Communication Theory, Ninth International Symposium on Tools and Methods of Competitive Engineering, 2012, Karlsruhe, Deutschland, ISBN 978-90-5155-082-5, DOI 10.3929/ethz-a-007250053, Seiten 153--162, [BibTeX][Abstract][Paper]
K. Wegener, L. Weiss, A. Gontarz, Methods and Tools for Evaluation of Energy Efficiency in Production, ICMC2012 / 2. ENIPROD-Kolloquium, 2012, Fraunhofer IWU, Chemnitz, Deutschland, Seiten 247--267, [BibTeX][Abstract]
M. Suter, E. Weingärtner, K. Wegener, MHD print head for additive manufacturing of metals, 1st CIRP Global Web Conference: Interdisciplinary Research in Production Engineering, 2012, Web, ISSN ISSN 2212-8271, DOI 10.1016/j.procir.2012.05.049, Band 2, Seiten 102--106, [BibTeX][Abstract]
M. Schmid, G. Levy, Quality Management and Estimation of Quality Costs for Additive Manufacturing with SLS, Direct Digital Manufacturing Conference, 2012, Berlin, Deutschland, [BibTeX][Abstract][Paper]
R. Transchel, J. Stirnimann, M. Blattner, B. Bill, R. Thiel, F. Kuster, K. Wegener, Effective Dynamometer for Measuring High Dynamic Process Force Signals in Micro Machining Operations, 5th CIRP Conference on High Performance Cutting, 2012, Zurich, Schweiz, DOI 10.1016/j.procir.2012.04.099, Band 1, Seiten 558--562, [BibTeX][Abstract]
E. Weingärtner, K. Wegener, F. Kuster, Applying wire electrical discharge dressing (WEDD) to improve grinding performance of metal bonded diamond wheels, Procedia CIRP, 2012, Zürich, Schweiz, DOI 10.1016/j.procir.2012.04.065, Band 1, Seiten 365--370, [BibTeX][Abstract]
S. Weikert, R.Ratnaweera, O.Zirn, K. Wegener, MODELING AND MEASUREMENT OF H-BOT KINEMATIC SYSTEMS, American Society for Precision Engineering, 2011, Denver, USA, [BibTeX][Paper]
A. Alavi, B. Clocher, A. Smith, A. Kunz, M. Fjeld, Multi-State Device Tracking for Tangible Tabletops, SIGRAD Swedish Chapter of Eurographics, 2011, Stockholm, Schweden, ISBN 1650-3686, DOI 10.3929/ethz-a-006708514, Seiten 100--104, [BibTeX][Abstract][Paper]
M. Ess, J. Mayr, S. Weikert, K. Wegener, THERMAL MODEL OF MACHINE TOOL FEED DRIVETRAINS, American Society for Precision Engineering, 2011, Denver, USA, ISBN 978-1-887706-58-2, Band 52, Seiten 292--302, [BibTeX]
A. Alavi, A. Kunz, M. Sugimoto, M. Fjeld, Dual Mode IR Position and State Transfer for Tangible Tabletops, Interactive Tabletops and Surfaces 2011 Conference, 2011, Kobe, Japan, ISBN 978-1-4503-0871-7, DOI 10.1145/2076354.2076414, Seiten 278--279, [BibTeX][Abstract][Paper][Slides]
A. Spierings, G. Levy, L. Labhart, K. Wegener, Production of functional parts using SLM – Opportunities and limitations, Innovative Developments in Virtual and Physical Prototyping, 2011, Leiria, Portugal, ISBN 978-0-415-68418-7, DOI 10.1201/b11341-126, Band 5, Seiten 785--790, [BibTeX][Abstract][Paper]
F. Amado, M. Schmid, G. Levy, K. Wegener, Advances in SLS Powder Characterisation, 22nd International Solid Freeform Fabrication Symposium, 2011, Austin (TX), USA, ISSN 1053-2153, Seiten 438--452, [BibTeX][Abstract][Paper]
M. Ess, T. Liebrich, W. Knapp, K. Wegener, Thermal Displacements of Rotary Axes, Proceedings of the MTTRF 2011 Annual Meeting, 2011, Chicago, USA, [BibTeX]
J. Mayr, M. Ess, S. Weikert, K. Wegener, Thermal behaviour improvement of linear axis, Proceedings of the 11th euspen conference, 2011, Como, Italien, ISBN 978-0-9553082-9-1, Band V1, Seiten 291--291, [BibTeX][Paper]
A. Gontarz, F. Hänni, L. Weiss, K. Wegener, Machine Tool Optimization Strategies - Evaluation of Actual Machine Tool Usage and Modes, The 9th Global Conference on Sustainable Manufacturing, 2011, St.Petersburg, Russland, Seiten 133--138, [BibTeX][Abstract]
M. Rabiey, C. Walter, F. Kuster, J. Stirnimann, F. Pude, K. Wegener, A comparative study on the dressing of hybrid bond CBN wheels using a conventional SiC dressing wheel and a short-pulse fiber laser, Proceedings of the 11th International Conference on Management of Innovative Technologies and 2nd International Conference on Sustainable Life in Manufacturing, 2011, Fiesa, Slowenien, ISBN 978-961-6536-57-8, Seiten 170--177, [BibTeX][Abstract]
M. Akbari, S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Analysis Of Thermal Residual Stresses In Brazed Diamond-Metal Joints Considering Creep And Plasticity In 316L Stainless Steel And Filler Alloy, COMPLAS XI (International conference on computational plasticity, fundamentals and application), 2011, Barcelona, Spanien, [BibTeX][Abstract][Paper]
S. Weikert, R. Ratnaweera, O. Zirn, K. Wegener, Modelling and Measuring of H-Bot Kinematics Systems, American Society for Precision Engineering, 2011, Denver, USA, [BibTeX][Abstract]
K. Ruhm, From Verbal Models to Mathematical Models – A Didactical Concept not just in Metrology, Joint International IMEKO TC1+TC7+TC13 Symposium 2011, 2011, Jena, Deutschland, [BibTeX][Abstract][Paper][Slides]
D. Wortmann, M. Reininghaus, J. Finger, C. Dold, P. Russbueldt, R. Poprawe, The physics in Applications of Ultrafast Lasers, Proc. of SPIE - Photonics, Devices, and Systems V, 2011, DOI 10.1117/12.911309, Band 8306, Seiten 830603/1-6, [BibTeX][Abstract]
G. Heinecke, S. Lamparter, A. Kunz, K. Wegener, R. Lepratti, Process Transparency: Effects of a Structured Read Point Selection, IFPR 21st International Conference on Production Research, 2011, Stuttgart, Deutschland, ISBN 978-3-8396-0293-5, DOI 10.3929/ethz-a-006612736, [BibTeX][Abstract][Paper]
A. Gontarz, L. Weiss, K. Wegener, Evaluation Approach with Function-oriented Modeling of Machine Tools, International Conference on Sustainable Intelligent Manufacturing, 2011, Leiria, Portugal, ISBN 978-989-8481-03-0, Seiten 61--68, [BibTeX][Abstract][Paper]
M. Schmid, F. Amado, G. Levy, iCoPP - A NEW POLYOLEFIN FOR ADDITIVE MANUFACTURING (SLS), International Conference on Additive Manufacturing AM, 2011, Loughborough, Vereinigtes Königreich, [BibTeX][Abstract]
A. Gontarz, N. Jufer, J. Bathelt, L. Weiss, K. Wegener, Determination and Evaluation of CO2 as a Sustainable Performance Measure on the Basis of a Typical Lathe, 1st International Conference on Sustainable Intelligent Manufacturing, 2011, Leiria, Portugal, ISBN 978-989-8481-03-0, Seiten 203--210, [BibTeX][Abstract]
G. Heinecke, R. Lepratti, S. Lamparter, K. Wegener, Produktionsbasiertes Management von Störereignissen der Lieferkette, Automation 2011, 2011, Baden-Baden, Deutschland, ISBN 978-3-18-092143-3, Seiten 87--91, [BibTeX][Abstract][Paper]
B. Migge, A. Kunz, T. Schmidt, Interaction Error Based Viewpoint Estimation for Continuous Parallax Correction on Interactive Screens, IADIS International Conference: ICT, Society and Human Beings 2011, 2011, Rome, Italien, ISBN 978-972-8939-52-6, DOI 10.3929/ethz-a-006562196, Seiten 93--104, [BibTeX][Abstract][Paper][Slides]
C. Dold, G. Eberle, J. Konstantins, M. Axtner, K. Wegener, Analysis of damage thresholds of laser scanning mirrors using ultrashort laser pulses, Proceedings of the Sixth International WLT Conference on Lasers in Manufacturing, 2011, München, Deutschland, DOI 10.1016/j.phpro.2011.03.155, Band 12, Nr. B, Seiten 445--451, [BibTeX][Abstract][Paper]
N. Rüttimann, S. Buhl, K. Wegener, Simulation of Single Grain Cutting Using SPH Method, XXII Conference on Supervising and Diagnostics of Machining Systems, 2011, Karpacz, Polen, ISSN 0721-7595, 1642-6568, Band 10, Nr. 3, Seiten 17--29, [BibTeX][Abstract]
A. Steinemann, S. Tschudi, A. Kunz, Full Body Haptic Display for Low-Cost Racing Car Driving Simulators, IEEE Virtual Reality 2011, 2011, Singapur, Singapur, ISBN 978-1-4577-0036-1, ISSN 1087-8270, DOI 10.1109/VR.2011.5759490, Seiten 245--246, [BibTeX][Abstract][Paper]
A. Steinemann, Y. Kellenberger, P. Peikert, A. Kunz, SAMSON: Simulation Supported Traffic Training Environment, The First International Symposium on Virtual Reality Innovations, 2011, Singapur, Singapur, ISBN 978-1-4577-0053-8, DOI 10.1109/ISVRI.2011.5759661, Seiten 325--326, [BibTeX][Abstract][Paper]
C. Wyen, K. Wegener, Experimental study of micro abrasive jet machining for the generation of rounded cutting edges on cemented carbide tools, 8th International Conference on High Speed Machining, 2010, Metz, Frankreich, ISBN 978-2-9534170-2-9, Seiten 367--373, [BibTeX]
F. Bach, T. Hassel, C. Biskup, N. Hinte, A. Schenk, F. Pude, In-process generation of water ice particles for cutting and cleaning purposes, Proceedings, 20th International Conference on Water Jetting, Graz, Austria, 20-22 October 2010 (BHR Group), 2010, Graz, Österreich, Seiten 275--283, [BibTeX][Abstract]
A. Kunz, S. Dehlin, T. Piazza, M. Fjeld, T. Olofsson, Collaborative Whiteboard: Towards Remote CollaBoration and Interaction in Construction Design, 27th International Conference on Applications of IT in the ABC Industry & Accelerating BIM Research Workshop, 2010, Kairo, Ägypten, DOI 10.3929/ethz-a-006219046, Seiten 132--140, [BibTeX][Abstract][Paper]
Z. Sárosi, W. Knapp, A. Kunz, K. Wegener, Evaluation of reflectivity of metal parts by a thermo-camera, Infrared Camera Applications Conference 2010, 2010, Las Vegas, USA, Seiten 475--486, [BibTeX][Abstract][Paper][Slides]
Z. Sárosi, W. Knapp, A. Kunz, K. Wegener, Detection of surface defects on sheet metal parts by using one-shot deflectometry in the infrared range, Infrared Camera Applications Conference 2010, 2010, Las Vegas, USA, Seiten 243--254, [BibTeX][Abstract][Paper]
M. Küchler, A. Kunz, CollaBoard: A Remote Collaboration Groupware Device Featuring an Embodiment-enriched Shared Workspace, ACM 2010 International Conference on Supporting Group Work, 2010, Sanibel / Florida, USA, Seiten 211--214, [BibTeX][Abstract][Paper][Video]
M. Steinlin, S. Weikert, K. Wegener, Open Loop Inertial Cross-talk Compensation Based on Measurement Data, 25th Annual Meeting of The American Society for Precision Engineering, 2010, Atlanta, USA, USA, [BibTeX][Abstract][Paper][Slides]
J. Mayr, M. Ess, S. Weikert, K. Wegener, COMPARING DIFFERENT COOLING CONCEPTS FOR BALL SCREW SYSTEMS, ASPE Annual Meeting, 2010, Atlanta, GA, USA, [BibTeX][Abstract][Paper]
B. Migge, A. Kunz, User Model for Predictive Calibration Control on Interactive Screens, 2010 International Conference on Cyberworlds - Cyberworlds 2010, 2010, Singapore, Singapur, DOI 10.1109/CW.2010.18, Seiten 32--37, [BibTeX][Abstract][Paper]
D. Politze, J. Bathelt, K. Wegener, Function Oriented Product Descriptions in Product Development and Factory Planning, International Conference on Systems Engineering and Engineering Management on the World Congress on Engineering and Computer Science 2010, 2010, San Francisco, USA, ISBN 978-988-17012-0-6, Seiten 1168--1172, [BibTeX][Abstract]
A. Kunz, T. Nescher, M. Küchler, CollaBoard: A Novel Interactive Electronic Whiteboard for Remote Collaboration with People on Content, 2010 International Conference on Cyberworlds - Cyberworldds 2010, 2010, Singapur, Singapur, DOI 10.1109/CW.2010.17, Seiten 430--437, [BibTeX][Abstract][Paper]
K. Wegener, P. Maglie, J. Mayr, M. Ess, FÜHRUNGEN: ANFORDERUNGEN UND REALITÄT, 15. Dresdner Werkzeugmaschinen-Fachseminar „Profilschienenführungen in Werkzeugmaschinen“, 2010, Dresden, Deutschland, Seiten 31--35, [BibTeX][Abstract][Paper]
K. Wegener, S. Weikert, N. Rüttimann, M. Ess, J. Mayr, J. Burkhalter, A. Lengwiler, Modeling as a Basis for Efficient Production, International Chemnitz Manufacturing Colloquium, 2010, Chemnitz, Deutschland, ISBN 978-3-942267-04-5, Seiten 115--135, [BibTeX][Abstract]
J. Monnin, K. Wegener, Evaluation of active structural vibration control strategies in milling process, Sustainable Production for Resource Efficiency and Ecomobility, International Chemnitz Manufacturing Colloquium, 2010, IWU, Chemnitz, Deutschland, ISBN 978-3-942267-04-5, Band 54, Seiten 613--628, [BibTeX][Abstract][Paper]
A. Spierings, N. Herres, G. Levy, Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts, Solid Freeform Symposium, 2010, Austin TX, USA, [BibTeX][Abstract][Paper]
A. Gontarz, L. Weiss, K. Wegener, Energy Consumption Measurement with a Multichannel Measurement System on a machine tool, International Conference on Innovative Technologies IN-TECH 2010 (2010), 2010, Prag, Tschechien, Band Proceedings of the International Conference on Innovative Technologies, Seiten 499--502, [BibTeX][Abstract][Paper]
D. Politze, J. Bathelt, N. Jufer, A. Kunz, A Survey on Stakeholders and Requirements for a new Factory Planning Approach, NordDesign 2010, 2010, Göteborg, Schweden, Seiten 447--454, [BibTeX][Abstract]
T. Liebrich, M. Gebhardt, S. Thoma, H. Nguyên, S. Weikert, W. Knapp, K. Wegener, Static and Dynamic Testing of 5-Axis Machine Tools, Proceedings of the MTTRF 2011 Annual Meeting 2010, 2010, San Francisco, USA, [BibTeX]
P. Maglie, R. Carbini, S. Weikert, K. Wegener, Efficient mechatronic evaluation of machine tool designs using model reduction, 12th Mechatronics Forum Biennial International Conference, 2010, Zurich, Schweiz, ISBN 978-3-033-02507-3, Band 1, Seiten 285--292, [BibTeX][Abstract][Paper]
J. Mayr, M. Ess, S. Weikert, K. Wegener, Thermal Compensation using Three- Dimensional Physical Machine Tool Models, The 12th Mechatronics Forum Biennial International Conference, 2010, Zürich, Schweiz, ISBN 978-3-033-02507-3, Seiten 279-285, [BibTeX][Abstract]
T. Lorenzer, S. Weikert, K. Wegener, Mechatronic Models for Evaluation of Reconfigurable Machine Tool Designs, The 12th Mechatronics Forum Biennial International Conference, 2010, Zürich, Schweiz, ISBN 978-3-033-02507-3, Seiten 245 -- 250, [BibTeX][Abstract]
J. Monnin, H. Wild, K. Wegener, Integration of Effort Aspect into Control Strategy Dimensioning and Comparison, The 12th Mechatronics Forum Biennial International Conference, 2010, ETH Zürich, Schweiz, [BibTeX][Abstract][Paper]
J. Pandremenos, K. Georgoulias, G. Chryssolouris, N. Jufer, J. Bathelt, A shoe design support module towards Mass Customization, 16th International Conference on Concurrent Enterprising, 2010, Lugano, Schweiz, [BibTeX][Abstract]
N. Jufer, J. Daaboul, J. Bathelt, D. Politze, F. Laroche, A. Bernard, A. Kunz, Performance Factory in the Context of Mass Customization, 16th International Conference on Concurrent Enterprising, 2010, Lugano, Schweiz, [BibTeX][Abstract][Paper]
R. Hofer, A. Kunz, Digisketch: Taming Anoto Technology on LCDs, Engineering Interactive Computing Systems 2010, 2010, Berlin, Deutschland, ISBN 978-1-4503-0083-4, Seiten 103--108, [BibTeX][Abstract][Paper]
S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Microstructure, residual stresses and shear strength of diamond-steel-joints brazed with CuSnTiZr filler alloy as a function of brazing parameters, 9th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding 2010, DVS-Berichte 263, 2010, Aachen, Deutschland, ISBN 978-3-87155-589-3, Seiten 243--247, [BibTeX][Abstract]
P. Maglie, R. Carbini, S. Weikert, K. Wegener, Efficient evaluation of machine concepts under hysteresis and inertia influences, Proceedings of the euspen International Conference, 2010, Delft, Niederlande, ISBN 978-0-9553082-8-4, Band 1, Seiten 487--490, [BibTeX][Abstract][Paper]
F. Reichert, A. Kunz, C. Bender, R. Moryson, K. Wegener, Utilization of a Bioinformatics Algorithm for the Comparison of Process Chains, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Österreich, ISBN 978-3-7083-0686-5, Seiten 751--758, [BibTeX][Abstract][Paper]
D. Politze, N. Jufer, J. Bathelt, A. Kunz, K. Wegener, AMOR – An Agent for Assisting Monitoring, Optimization and (Re-)Design in Factory Design, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Österreich, ISBN 978-3-7083-0686-5, Seiten 761--768, [BibTeX][Abstract][Paper]
F. Reichert, A. Kunz, R. Moryson, K. Wegener, A Key Performance Indicator System of Process Control as a Basis for Relocation Planning, 43rd CIRP International Conference on Manufacturing Systems Sustainable Production and Logistics in Global Networks, 2010, Wien, Österreich, ISBN 978-3-7083-0686-5, Seiten 805--812, [BibTeX][Abstract][Paper]
N. Jufer, D. Politze, J. Bathelt, A. Kunz, Performance Factory - A New Approach of Performance Assessment for the Factory of the Future, 7th International DAAAM Baltic Conference, 2010, Tallinn, Estland, ISBN 978-9985-59-982-2, Seiten 209--214, [BibTeX][Abstract][Paper]
D. Politze, J. Bathelt, M. Reinhard, N. Jufer, A. Kunz, Interfacing Product Development and Factory Planning - Towards a Unified Life Cycle Management, 7th International DAAAM Baltic Conference, 2010, Tallinn, Estland, ISBN 978-9985-59-982-2, Seiten 334--339, [BibTeX][Abstract][Paper]
J. Bathelt, D. Politze, N. Jufer, A. Jönsson, A. Kunz, Factory of the Future Enabled by the Virtual Factory Framework (VFF), 7th International DAAAM Baltic Conference, 2010, Tallinn, Estland, ISBN 978-9985-59-982-2, Seiten 203--208, [BibTeX][Abstract][Paper]
C. Wyen, K. Wegener, Influence of cutting edge radius on cutting forces in machining titanium, CIRP Annals - Manufacturing Technology, 2010, Pisa, Italien, Band 59, Nr. 1, Seiten 93--96, [BibTeX]
B. Migge, T. Schmidt, A. Kunz, POMDP Models for Continuous Calibration of Interactive Surfaces, 2010 AAAI Spring Symposium, Embedded Reasoning: Intelligence in Embedded Systems, 2010, Stanford, USA, ISBN 978-1-57735-458-1, Seiten 86--92, [BibTeX][Abstract][Paper][Slides]
T. Piazza, J. Lundström, A. Kunz, M. Fjeld, Predicting Missing Markers in Real-time Optical Motion Capture, 3D Physiological Human Workshop, 2009, Zermatt, Schweiz, ISBN 978-3-642-10468-8, DOI 10.1007/978-3-642-10470-1_11, Band Lecture Notes in Computer Science (LNCS), Nr. 5903, Seiten 125--136, [BibTeX][Abstract][Paper]
S. Affolter, A. Ritter, M. Schmid, Polymerwerkstoffe mit Brandschutzausrüstung – Verhalten in der Thermoanalyse, Würzburger Tage der Instrumentellen Polymeranalytik, 2009, Würzburg, Deutschland, [BibTeX][Paper]
M. Afrasiabi, S. Mohammadi, Analysis of bubble pulsations of underwater explosions by the smoothed particle hydrodynamics method, International Conference on Particle-Based Methods, 2009, Barcelona, Spanien, Band 1, Nr. 1, Seiten 439--445, [BibTeX][Abstract]
S. Jaumann, S. Weikert, K. Wegener, PROTOTYPE OF A PLANAR GUIDED MILLING MACHINE FOR HIGHPRECISION APPLICATIONS, American Society for Precision Engineering, 2009, Monterey, USA, [BibTeX][Abstract]
J. Mayr, M. Ess, S. Weikert, K. Wegener, CALCULATING THERMAL LOCATION AND COMPONENT ERRORS ON MACHINE TOOLS, ASPE Annual Meeting, 2009, Monterey, CA, USA, [BibTeX][Abstract][Paper]
T. Lorenzer, S. Weikert, K. Wegener, Efficient Modelling and Simulation of Reconfigurable Machine Tools Using Predefined Structural Modules, 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production, 2009, München, Deutschland, ISBN 978-3-8316-0933-8, Seiten 214--223, [BibTeX][Abstract][Paper][Slides]
S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Influence of the brazing parameters on the properties of diamond-metal joints, European Congress on Advanced Materials and Processes Euromat 2009, 2009, Glasgow, United Kingdom, [BibTeX]
M. Bühringer, J. Berchtold, M. Büchel, C. Dold, M. Bütikofer, M. Feuerstein, Inspection of high voltage power lines - a new approach, Clawar 2009, 2009, Istanbul, Türkei, [BibTeX][Abstract][Paper]
R. Hofer, A. Kunz, TNT: Touch ‘n’ Tangibles on LC-Displays, 8th International Conference on Entertainment Computing - Lecture Notes in Computer Science, 2009, Paris, Frankreich, ISBN 978-3-642-04051-1, ISSN 1611-3349, Band 5709/2009, Seiten 222--227, [BibTeX][Abstract][Paper][Video]
T. Piazza, J. Lundström, A. Hugestrand, A. Kunz, M. Fjeld, Towards Solving the Missing Marker Problem in Realtime Motion Capture, ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2009, San Diego, USA, ISBN 978-0-7918-4899-9, DOI 10.1115/DETC2009-86517, Seiten 1521--1526, [BibTeX][Abstract][Paper]
R. Hofer, T. Nescher, A. Kunz, QualiTrack: Highspeed TUI Tracking for Tabletop Applications, Interact 2009, 2009, Uppsala, Schweden, DOI 10.1007/978-3-642-03658-3_38, Band LNCS 5727, Nr. II, Seiten 332--335, [BibTeX][Abstract][Paper][Video]
I. Habib, N. Berggren, E. Rehn, G. Josefsson, A. Kunz, M. Fjeld, DGTS: Integrated Typing and Pointing, Interact 2009, 2009, Uppsala, Schweden, DOI 10.1007/978-3-642-03658-3_30, Band LNCS 5727, Nr. II, Seiten 232--235, [BibTeX][Abstract][Paper][Video]
M. Schmid, G. Levy, C. Simon, FINISHING OF SLS-PARTS FOR RAPID MANUFACTURING (RM) – A COMPREHENSIVE APPROACH –, Annual International Solid Freeform Fabrication Symposium 2009, 2009, Austin (TX), USA, [BibTeX][Paper]
A. Spierings, G. Levy, Comparison of density of stainless steel 316L parts produced with selective laser melting using different powder grades, 20. Solid Freeform Fabrication Symposium 2009, 2009, Austin, TX, USA, [BibTeX][Abstract][Paper]
J. Mayr, M. Ess, S. Weikert, K. Wegener, Compensation of Thermal Effects on Machine Tools using a FDEM Simulation Approach, 9th International Conference and Exhibition on laser metrology, machine tool, CMM and robotic performance, 2009, Lodon, Vereinigtes Königreich, ISBN 978-0-9553082-7-7, [BibTeX][Abstract][Paper]
N. Jufer, J. Bathelt, A. Kunz, M. Dürst, Product and Production Configuration Method – enhancing the customer driven value chain by the cognitive dimension, International Conference on Concurrent Enterprising, 2009, Leiden, Niederlande, [BibTeX][Abstract][Paper][Slides]
P. Maglie, Anwendung von FE-basierten Reduktionsmethoden, VDI-Mechatronik, 2009, Heidelberg, Deutschland, ISBN 978-3-98-12624-5-2, Seiten 312--320, [BibTeX][Abstract][Paper]
D. Politze, J. Bathelt, Exploitation Method for Functional Product Requirements - An Integrated Function Oriented Approach, Proceedings of the 2009 IEEE International Conference on Mechatronics, 2009, Málaga, Spanien, [BibTeX][Abstract][Paper]
D. Politze, S. Dierssen, A Criteria-based Measure of Similarity between Product Functionalities, Proceedings of the 19th CIRP Design Conference - Competitive Design, 2009, Cranfield University, Vereinigtes Königreich, Seiten 99--103, [BibTeX]
R. Hofer, D. Naeff, A. Kunz, FLATIR: FTIR Multi-touch Detection on a Discrete Distributed Sensor Array, Tangible and Embedded Interfaces (TEI) 2009, 2009, Cambridge, Vereinigtes Königreich, ISBN 978-1-60558-493-5, DOI 10.1145/1517664.1517730, Seiten 317--322, [BibTeX][Abstract][Paper][Video]
J. Mayr, M. Ess, S. Weikert, K. Wegener, SIMULATION AND PREDICTION OF THE THERMALLY INDUCED DEFORMATIONS ON MACHNIE TOOLS CAUSED BY MOVING LINEAR AXIS USING THE FDEM SIMULATION APPROACH, ASPE Annual Meeting, 2008, Portland, OR, USA, [BibTeX][Abstract][Paper]
C. Leinenbach, H. Schindler, T. Baser, N. Rüttimann, K. Wegener, Fracture Behaviour and Defect Assessment of Brazed Steel Joints, 17th European Conference on Fracture, 2008, Brno, Tschechien, Seiten 2121--2128, [BibTeX][Abstract][Paper]
D. Politze, S. Dierssen, A Functional Model for the Functions Oriented Description of Customer-Related Functions of High Variant Products, Proceedings of NordDesign 2008, 2008, Tallinn, Estland, Seiten 19--28, [BibTeX]
F. Reichert, A. Kunz, R. Moryson, MAE-P3 – A System to Gain Transparency of Production Structure as a Basis for Production Relocation Planning, Nineteenth International Conference on Systems Engineering (ICSENG 2008), 2008, Las Vegas, USA, ISBN 987-0-7695-3331-5, DOI 10.1109/ICSEng.2008.55, Seiten 458--463, [BibTeX][Abstract][Paper][Slides]
K. Wegener, G. Vargas Evangelista, F. Kuster, F. Pinto, T. Schnider, Modelling of Hard Broaching, Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design and Analysis, 2008, Haifa, Israel, ISBN 0-7918-3827-7, DOI 10.1115/ESDA2008-59454, Band Volume 1: Advanced Energy Systems; Advanced and Digital Manufacturing; Advanced Materials; Aerospace, Nr. Paper No. ESDA2008-59454,, Seiten 427-435, [BibTeX][Abstract]
A. Kunz, IT-unterstützte Kreativprozesse, VR/AR-Technologien für die Produktion, 2008, Chemnitz, Deutschland, ISBN 978-300-024677-7, DOI 10.3929/ethz-a-006039151, Seiten 15--22, [BibTeX][Abstract][Paper]
G. Vargas Evangelista, K. Wegener, F. Kuster, T. Schnider, Analyse und Optimierung des Harträumprozesses mit Diamantwerkzeugen, 7. Seminar Moderne Schleiftechnologie und Feinstbearbeitung, 2008, Stuttgart, Deutschland, ISBN 978-3-00-024493-3, Seiten 20--21, [BibTeX][Abstract]
K. Wegener, G. Vargas Evangelista, S. Wunder, F. Kuster, F. Pinto, An Experimental Approach for Grain Wear for Improving Kinematic-Geometrical Simulation, Proceedings of the euspen International Conference, 2008, Zurich, Schweiz, ISBN 13: 978-0-9553082-5-3, Band 1, Seiten 130--134, [BibTeX][Abstract]
R. Margot, A. Gil Boeira, F. Kuster, K. Wegener, Signal Processing of Acoustic Emission Data for Chip-Breakage Recognition in Machining, Proceedings of the 28-th European Conference on Acoustic Emission Testing, 2008, Kraków, Polen, Seiten 208-213, [BibTeX][Abstract]
D. Politze, Experiences on Including Variability Information in a Function Oriented Product Documentation, 7th international Heinz Nixdorf Symposium, 2008, Paderborn, Deutschland, [BibTeX]
R. Hofer, A. Kunz, P. Kaplan, MightyTrace: Multiuser Tracking Technology on LC-displays, Proceeding of the twenty-sixth annual SIGCHI conference on Human factors in computing systems, 2008, Florence, Italien, ISBN 978-1-60558-011-1, DOI 10.3929/ethz-a-005705488, Seiten 215--218, [BibTeX][Abstract][Paper]
C. Leinenbach, N. Rüttimann, H. Schindler, Mechanische Prüfung von Hochtemperatur-Lötverbindungen – Festigkeit, Bruchverhalten und Fehlertoleranz, Werkstoffprüfung 2007: Konstruktion, Qualitätssicherung und Schadensanalyse, 2007, Neu Ulm, Deutschland, [BibTeX]
J. Mayr, S. Weikert, K. Wegener, COMPARING THE THERMO-MACHANICAL-BEHAVIOR OF MACHINE TOOL FRAME DESIGNS USING A FDM-FEA SIMULATION APPROACH, ASPE Annual Meeting, 2007, Dallas, TX, USA, [BibTeX][Abstract]
C. Ganser Schwab, A. Steinemann, R. Hofer, A. Kunz, InfrActables: Supporting Collocated Group Work by Combining Pen-Based and Tangible Interaction, Proceedings of Tabletop 2007, 2007, Newport, Rhode Island, USA, DOI 10.3929/ethz-a-005705337, [BibTeX][Abstract][Paper][Video]
P. Pedrazzoli, D. Rovere, C. Constantinescu, J. Bathelt, M. Pappas, P. Dépincé, G. Chryssolouris, C. Boër, E. Westkämper, High Value Adding VR Tools for Networked Customer-Driven Factory, 4th International Conference on Digital Enterprise Technology, 2007, Bath, Vereinigtes Königreich, ISBN 978-0-86197-141-1, Seiten 347--352, [BibTeX][Abstract][Paper]
K. Wang, R. Amin, M. Juang, B. Migge, A Measurement Study for Link Rate Modeling and Handover Optimization for Vehicle Communications over IEEE 802.11g Infrastructure Network, ACM MobiCom workshop on Challenged Networks, 2007, Montreal, Kanada, [BibTeX][Abstract]
T. Lorenzer, S. Weikert, K. Wegener, Decision-making Aid for the Design of Reconfigurable Machine Tools, The 2nd International Conference on Changeable, Agile, Reconfigurable and Virtual Production, 2007, Toronto, Kanada, Seiten 720 - 729, [BibTeX][Abstract][Paper]
J. Bathelt, J. Meile, Computer Aided Methods Supporting Concurrent Engineering when designing Mechatronic Systems Controlled by a PLC, Proceedings of International Conference on Manufacturing Automation, 2007, Singapore, Singapur, [BibTeX][Abstract][Paper]
R. Hofer, C. Ganser Schwab, A. Kunz, MatrixView: Extending Immersion in Video Conferencing, Adjunct Proceedings of the 19th Annual ACM Symposium on User Interface Software and Technology (UIST) 2006, Montreux, Switzerland, October 15-18, 2006, 2006, Montreux, Schweiz, DOI 10.3929/ethz-a-005713962, [BibTeX][Abstract][Paper]
S. Wunder, F. Kuster, F. Pinto, Roughness Prediction by Modelling the Grinding, CIRP - 2nd International Conference on High Performance Cutting (HPC), 2006, Vancouver, Kanada, [BibTeX][Abstract]
A. Kunz, G. Fadel, J. Taiber, M. Schichtel, Towards Collaboration in Engineering of Tomorrow - Building Highly Interactive Virtual Collaboration Platforms, SAE 2006 World Congress & Exhibition, 2006, Detroit, Mich., USA, [BibTeX][Abstract][Paper]
C. Ganser Schwab, A. Steinemann, A. Kunz, InfrActables: Multi-User Tracking System for Interactive Surfaces, Proceedings of the IEEE conference on Virtual Reality (IEEE VR 2006), 2006, Alexandria, Virginia, USA, ISBN 1-4244-0224-7, DOI 10.1109/vr.2006.86, Seiten 253--256, [BibTeX][Abstract][Paper]
M. Küchler, A. Kunz, HoloPort – A Device for Simultaneous Video and Data Conferencing Featuring Gaze Awareness, Proceedings of the IEEE conference on Virtual Reality (IEEE VR 2006), 2006, Alexandria, Virginia, USA, ISSN 1087-8270, DOI 10.1109/vr.2006.71, Seiten 81--87, [BibTeX][Abstract][Paper]
R. Zhang, A. Kunz, P. Lochmatter, G. Kovacs, Dielectric Elastomer Spring Roll Actuators for a Portable Force Feedback Device, 14th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems 2006, 2006, Alexandria, Virginia, USA, ISBN 1-4244-0226-3, DOI 10.1109/HAPTIC.2006.1627137, Seiten 347--353, [BibTeX][Abstract][Paper]
R. Zhang, A. Kunz, P. Lochmatter, G. Kovacs, Spring Roll Dielectric Elastomer Actuators for a Portable Force Feedback Glove, Proceeding of SPIE 2006 - Electroactive Polymer Actuators and Devices (EAPAD), 2006, San Diego, California, USA, ISBN 9780819462213, DOI 10.1117/12.658524, Band 6168, Seiten 505--516, [BibTeX][Abstract][Paper]
R. Hofer, C. Ganser Schwab, A. Kunz, Tracking Technology for Multiple Device Interaction, 18th Annual ACM Symposium on User Interface Software and Technology, 2005, Seattle, Washington, USA, DOI 10.3929/ethz-a-005746141, [BibTeX][Abstract][Paper][Slides]
J. Hoffmann, Analyse und Verarbeitung vektorisierter Handskizzen, 16. Symposium Design for X 2005, 2005, Neukirchen, Deutschland, [BibTeX][Abstract][Paper]
C. Ganser Schwab, T. Kennel, A. Kunz, N. Birkeland, Computer Supported Environment for Creativity Processes in Globally Distributed Teams, Proceedings of ICED 2005, 2005, Sydney, Australien, ISBN 1-904670-00-8, DOI 10.3929/ethz-a-006039179, Seiten 109--110, [BibTeX][Abstract][Paper]
J. Bathelt, A. Jönsson, C. Bacs, S. Dierssen, M. Meier, Applying the New Design Guideline 2206 on Mecahtronic Systems Controlled by a PLC, International Conference on Engineering Design, 2005, Melbourne, Australien, [BibTeX][Abstract][Paper]
J. Bathelt, U. Frey, M. Fankhauser, A. Jönsson, S. Dierssen, M. Meier, A New Guideline to Develop a Lecture - Using the VDI 2221 Frame - Applied on a a Mechatronic Course, International Conference on Engineering Design, 2005, Melbourne, Australien, [BibTeX][Abstract][Paper]
A. Gil Boeira, R. Margot, F. Kuster, H. Roelofs, U. Urlau, On-line Chip Speed Measurement in the Turning Process, Proceedings of the 38th CIRP International Seminar on Manufacturing Systems, 2005, Florianópolis, Brasilien, [BibTeX][Abstract]
R. Margot, A. Gil Boeira, F. Kuster, H. Roelofs, U. Urlau, Monitoring Chip Formation in Machining through Strategical On-line Signal Processing of Acoustic Emission, Proceedings of the 38th CIRP International Seminar on Manufacturing Systems, 2005, Florianópolis, Brasilien, [BibTeX][Abstract]
K. Wegener, F. Kuster, S. Wunder, F. Pinto, M. Kieser, Model to Optimise the Grain Pattern of Grinding Discs with Controlled, 8th CIRP International Workshop on Modeling of Machining Operations, 2005, Chemnitz, Deutschland, [BibTeX][Abstract]
W. Weingaertner, E. Weingärtner, S. Wunder, The Influence of Cutting Fluid Application Method on the Grinding Process with CBN Grinding Wheels, 38th CIRP - International Seminar on Manufacturing Systems, 2005, Florianópolis, Brasilien, [BibTeX]
A. Mazzone, A. Kunz, Sketching the Future of the SmartMesh Wide Area Haptic Feedback Device by Introducing the Controlling Concept for such a Deformable Multi-Loop Mechanism, WorldHaptics - First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 2005, Pisa, Italien, ISBN 0-7695-2310-2, DOI 10.1109/WHC.2005.116, Seiten 308--315, [BibTeX][Abstract][Paper]
M. Küchler, A. Kunz, Imperceptible Projection Blanking for Reliable Segmentation within Mixed Reality Applications, 9th Int. Workshop on Immersive Projection Technology, 11th Eurographics Workshop on Virtual Environments, 2005, Aalborg, Dänemark, ISBN 3-905673-21-5, ISSN 1727-530X, DOI 10.2312/EGVE/IPT_EGVE2005/023-030, Seiten 23--30, [BibTeX][Abstract][Paper]
A. Kunz, R. Moryson, Minimierung der Prozesskette in der Grobplanungsphase der Produktionsplanung, 15. Symposium Design for X, 2004, Neukirchen, Deutschland, ISBN 3-9808539-2-6, DOI 10.3929/ethz-a-006039229, Seiten 65--75, [BibTeX][Abstract][Paper]
M. Meier, S. Dierssen, J. Bathelt, Die Virtuelle Maschine - oder wie Inbetriebnahme vor Montage möglich ist, 4.Chemnitzer Produktionstechnisches Kolloquium, 2004, Chemnitz, Deutschland, [BibTeX][Slides]
A. Mazzone, C. Spagno, A. Kunz, Morphing the SmartMesh: Proposing a Novel Control Architecture, Eurohaptics 2004, 2004, Munich, Deutschland, Seiten 467--472, [BibTeX][Abstract][Paper]
R. Zhang, A. Kunz, A. Mazzone, S. Michel, G. Kovacs, Dielectric Elastomer Actuators for A Portable Force Feedback Device, 4th International Conference Eurohaptics 2004, 2004, München, Deutschland, ISBN 3980961400, DOI 10.3929/ethz-a-010090533, Seiten 300--307, [BibTeX][Abstract][Paper]
A. Mazzone, C. Spagno, A. Kunz, The HoverMesh: A Deformable Structure Based on Vacuum Cells, Proceedings of the 2004 ACM SIGCHI International Conference on Advances in computer entertainment technology, 2004, Singapur, ISBN 1-58113-882-2, DOI 10.1145/1067343.1067366, Seiten 187--193, [BibTeX][Abstract][Paper]
J. Bathelt, A. Jönsson, How to Implement the Virtual Machine Concept Using xPC Target, Nordic MATLAB Conference 2003, 2003, Copenhagen, Dänemark, [BibTeX][Abstract][Paper]
A. Kunz, R. Moryson, CAPP-basierter Assistent für Digitale Fabrik Tools innerhalb des Produktentstehungsprozesses, 14. Symposium Design for X, 2003, Neukirchen, Deutschland, ISBN 3-9808539-1-8, DOI 10.3929/ethz-a-006039256, Seiten 11--24, [BibTeX][Abstract][Paper]
A. Mazzone, R. Zhang, A. Kunz, Novel Actuators for Haptic Displays based on Electroactive Polymers, Proceedings of the ACM symposium on Virtual reality software and technology 2003, 2003, Osaka, Japan, ISBN 1-58113-569-6, DOI 10.1145/1008653.1008688, Seiten 196--204, [BibTeX][Abstract][Paper]
A. Mazzone, C. Spagno, A. Kunz, A Haptic Feedback Device based on an Active Mesh, Proceedings of the ACM symposium on Virtual reality software and technology 2003, 2003, Osaka, Japan, ISBN 1-58113-569-6, DOI 10.1145/1008653.1008687, Seiten 188--195, [BibTeX][Abstract][Paper]
J. Bathelt, A. Jönsson, A. Kunz, C. Bacs, M. Meier, Conceptual Design Approach for Mechatronic Systems Controlled by a Programmable Logic Controller (PLC), 14th International Conference on Engineering Design 2003, 2003, Stockholm, Schweden, ISBN 1-904670-00-8, DOI 10.3929/ethz-a-010090693, Seiten 497--498, [BibTeX][Paper]
M. Gross, S. Würmlin, M. Naef, E. Lamboray, C. Spagno, A. Kunz, E. Koller-Meier, T. Svoboda, L. Van Gool, S. Lang, K. Strehlke, A. VandeMoere, O. Staadt, blue-c: A Spatially Immersive Display and 3D Video Portal for Telepresence, Proceedings of ACM SIGGRAPH 2003, 2003, San Diego, California, USA, ISBN 1-58113-709-5, DOI 10.1145/882262.882350, Band 2, Nr. 3, Seiten 819--827, [BibTeX][Abstract][Paper]
A. Mazzone, C. Spagno, A. Kunz, R. Zhang, SmartMesh: A Smart Structure for Object Creation, Eurohaptics 2003, 2003, Dublin, Irland, DOI 10.3929/ethz-a-006039128, Seiten 451--455, [BibTeX][Abstract][Paper]
J. Bathelt, A. Jönsson, C. Bacs, M. Meier, Modularisierung SPS-gesteuerter mechatronischer Systeme, 1. Paderborner Workshop Intelligente Mechatronische Systeme, 2003, Paderborn, Deutschland, [BibTeX][Abstract][Paper]
A. Jönsson, J. Bathelt, G. Broman, Interacting with real time simulations – virtual reality in industry applications, Immersive Projection Technology and Virtual Environments 2003, 2003, Zürich, Schweiz, ISBN 1-58113-686-2, Seiten 305--306, [BibTeX][Abstract][Paper]
C. Spagno, A. Kunz, Construction of a Three-Sided Immersive Telecollaboration System, Proceeding of the IEEE Virtual Reality Conference 2003, 2003, Los Angeles, California, USA, ISBN 0-7695-1882-6, ISSN 1087-8270, DOI 10.1109/vr.2003.1191119, Seiten 37--44, [BibTeX][Abstract][Paper]
A. Kunz, C. Spagno, VR zur Unterstützung des kollaborativen Arbeitens, 13. Symposium Design for X 2002, 2002, Neukirchen, Deutschland, ISBN 3-9808539-0-X, DOI 10.3929/ethz-a-006039290, Seiten 109--116, [BibTeX][Abstract][Paper]
A. Kunz, S. Müller, Tool zur effizienten Durchführung einer FMEA-Sitzung, 13. Symposium Design for X 2002, 2002, Neukirchen, Deutschland, ISBN 3-9808539-0-X, DOI 10.3929/ethz-a-006039295, Seiten 171--178, [BibTeX][Abstract][Paper]
A. Kunz, S. Müller, IT-Unterstützung für die Metaplantechnik, 13. Symposium Design for X 2002, 2002, Neukirchen, Deutschland, ISBN 3-9808539-0-X, DOI 10.3929/ethz-a-006039389, Seiten 199--206, [BibTeX][Abstract][Paper]
A. Kunz, T. Kennel, A. Mazzone, S. Müller, Workplace to Support the Teamwork in the Early Stages of the Product Development Process, Proceedings of Virtual Concept 2002, 2002, Biarritz, Frankreich, ISBN 2-9514772-2-8, DOI 10.3929/ethz-a-006039406, [BibTeX][Abstract][Paper]
A. Kunz, T. Kennel, U. Hugentobler, Development of a Digital Lectern for Teleteaching, ASME Design Engineering Technical Conferences (DETC) and Computers and Information in Engineering Conference (CIE) 2002, 2002, Montreal, Kanada, DOI 10.1115/DETC2002/CIE-34414, [BibTeX][Abstract][Paper][Slides]
A. Kunz, T. Kennel, M. Meier, Ein neues Präsentationstool für die Lehre, 47. Internationales Wissenschaftliches Kolloquium IWK, 2002, Ilmenau, Deutschland, ISBN 0943-7207, DOI 10.3929/ethz-a-006042039, Seiten 606--607, [BibTeX][Abstract][Paper]
A. Kunz, C. Spagno, Technical System for Collaborative Work, Eurographics Workshop on Virtual Environments 2002, 2002, Barcelona, Spanien, ISBN 1-58113-535-1, DOI 10.3929/ethz-a-006050425, Seiten 73--80, [BibTeX][Abstract][Paper]
A. Breiing, A. Kunz, Critical Consideration and Improvement of the FMEA, Tools and methods of competitive engineering - TMCE 2002, 2002, Wuhan, China, ISBN 7-5609-2682-7, DOI 10.3929/ethz-a-006042074, Seiten 519--530, [BibTeX][Abstract][Paper]
A. Kunz, C. Spagno, Simultaneous Projection and Picture Acquisition for a Distributed Collaborative Environment, Proceedings of the IEEE Virtual Reality 2002 Conference, 2002, Orlando, Florida, USA, ISBN 0-7695-1492-8, DOI 10.1109/vr.2002.996538, Seiten 279--280, [BibTeX][Abstract][Paper]
A. Breiing, A. Kunz, Kritische Betrachtunng und Verbesserung der FMEA, 12. Symposium Design for X 2001, 2001, Neukirchen, Deutschland, ISBN 3-00-008364-2, DOI 10.3929/ethz-a-006042119, Seiten 15--20, [BibTeX][Abstract][Paper]
A. Kunz, S. Müller, T. Kennel, K. Lauche, K. Mbiti, Supporting the Teamwork by New Means of the Information Technology, International Conference on Engineering Design ICED 2001, 2001, Glasgow, Vereinigtes Königreich, ISBN 1-86058-355-5, DOI 10.3929/ethz-a-006042141, Seiten 425--432, [BibTeX][Abstract][Paper]
A. Kunz, M. Meier, Innovation at the Digital Product - the Use of Virtual Reality in Product Development Processes, International Conference on Engineering Design ICED 2001, 2001, Glasgow, Vereinigtes Königreich, ISBN 1-86058-354-7, DOI 10.3929/ethz-a-006042186, Seiten 693--700, [BibTeX][Abstract][Paper]
T. Kennel, A. Kunz, S. Müller, Innoplan - An Adaptation of the Metaplantechnique for a Novel Computer Supported Method of Teamwork, International Conference on Engineering Design ICED 2001, 2001, Glasgow, Vereinigtes Königreich, ISBN 1-86058-354-7, DOI 10.3929/ethz-a-006042219, Seiten 387--394, [BibTeX][Abstract][Paper]
A. Kunz, C. Spagno, Novel Shutter Glass Control for Simultaneous Projection and Picture Acquisition, Immersive Projection Technology and Virtual Environments 2001, 2001, Stuttgart, Deutschland, ISBN 3-211-83671-3, DOI 10.1007/978-3-7091-6221-7_26, Seiten 257--266, [BibTeX][Abstract][Paper]
A. Kunz, C. Spagno, Modified Shutter Glasses for Projection and Picture Acquisition in Virtual Environments, Proceedings of the IEEE Virtual Reality 2001 Conference, 2001, Yokohama, Japan, ISBN 0-7695-0948-7, DOI 10.1109/vr.2001.913797, Seiten 281--282, [BibTeX][Abstract][Paper]
O. Staadt, M. Gross, A. Kunz, M. Meier, The Blue-C: Integrating Real Humans into a Networked Immersive Environment, Proceedings of the third international conference on Collaborative virtual environments, 2000, San Francisco, CA, USA, ISBN 1-58113-303-0, DOI 10.3929/ethz-a-005792478, Seiten 201--202, [BibTeX][Abstract][Paper]
A. Kunz, A. Burri, Design and Construction of a new haptic interface, ASME Design Eingineering Technical Conferences (DETC) and Computers and Information in Engineering Conference (CIE) 2000, 2000, Baltimore, USA, DOI 10.3929/ethz-b-000082630, Seiten 497--502, [BibTeX][Abstract][Paper]
O. Niedermann, S. Keller, A. Kunz, M. Meier, Einsatz der Informationstechnologie in der FMEA, Proceedings of The FMEA Benutzertreffen, 1999, Fürth, Deutschland, DOI 10.3929/ethz-a-010107573, [BibTeX][Abstract][Paper]
W. Elspass, A. Kunz, Portable haptic interface with active functinal design, Proceedings of SPIE, the International Society for Optical Engineering, 1999, San Francisco, CA, USA, ISSN 0277-786X, DOI 10.1117/12.350767, Band 3668, Nr. 2, Seiten 926--932, [BibTeX][Abstract][Paper]
B. Seybold, F. Metzger, G. Ogan, J. Bathelt, F. Collenberg, J. Taiber, K. Simon, M. Engeli, Spatial Modelling with Geometric Constraints, Proceedings of the Third International Conference on the Practical Application of Constraint Technology, 1997, London, Vereinigtes Königreich, Seiten 307--320, [BibTeX][Abstract][Paper]
S. Klein, A. Kecskeméthy, J. Bathelt, F. Collenberg, G. Régnault, Effiziente kinematische Verarbeitung von Zusammenbauten in feature-basierten CAD-Systemen, Tagungsband Getriebetechnik-Kolloquium, 1997, Warnemünde, Deutschland, Seiten 103--113, [BibTeX][Abstract][Paper]

Journals

I. Dey, F. Raphael, K. Karsten, R. Christian, K. Wegener, Mechanical Properties and Microstructure Analysis of Additive/Conventional Manufactured 1.4313 Soft Martensitic Steel, Additive Manufacturing, 2023, [BibTeX][Abstract]
U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, In Situ Spatially Resolved Coating Thickness Measurements in Thermal Spraying, Journal of Thermal Spray Technology, 2023, DOI 10.1007/s11666-023-01656-5, [BibTeX]
D. Keller, K. Wegener, T. Schudeleit, A. Monney, Spatial Oxygen Distribution of the Direct Metal Deposition Process for Different Powder Nozzles, Applied Sciences, 2023, [BibTeX]
V. Ostad Ali Akbari, M. Kuffa, K. Wegener, Physics-informed Bayesian machine learning for probabilistic inference and refinement of milling stability predictions, CIRP Journal of Manufacturing Science and Technology, 2023, DOI https://doi.org/10.1016/j.cirpj.2023.07.004, Band 45, Seiten 225--239, [BibTeX][Abstract][Paper]
S. Arne, L. Cheng, N. Torbjørn, Augmented reality for industrial quality inspection: An experiment assessing task performance and human factors, Computers in Industry, 2023, DOI https://doi.org/10.1016/j.compind.2023.103985, Band 151, [BibTeX][Abstract][Paper]
F. Mauz, R. Wigger, L. Griesbaum, T. Wahl, M. Kuffa, K. Wegener, Acoustic Roughness Measurement of Railway Tracks: Running Surface Detection and Compensation of Lateral Movements for Optical Measurements on a Train, Sensors, 2023, Schweiz, DOI https://doi.org/10.3390/s23125764, Band 23(12), Nr. 5764, [BibTeX][Abstract][Paper]
F. Stoop, M. Severin, C. Patrick, J. Mayr, K. Wegener, Multi-variable rotor dynamics optimization of an aerostatic spindle, CIRP Journal of Manufacturing Science and Technology, 2023, ISSN 1755-5817, DOI https://doi.org/10.1016/j.cirpj.2023.01.006, Band 42, Seiten 12-23, [BibTeX][Abstract][Paper]
N. Zhang, H. Klippel, M. Afrasiabi, M. Röthlin, M. Kuffa, M. Bambach, K. Wegener, Hybrid SPH-FEM solver for metal cutting simulations on the GPU including thermal contact modeling, CIRP Journal of Manufacturing Science and Technology, 2023, ISSN 1755-5817, DOI https://doi.org/10.1016/j.cirpj.2022.12.012, Band 41, Seiten 311-327, [BibTeX][Paper]
U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, Analysis and Comparison of Two Different Sensing Techniques for In Situ Coating Thickness Measurements, JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, DOI 10.1007/s11666-022-01508-8, [BibTeX]
B. Rüttimann, M. Stöckli, Exploiting Virtual Elasticity of Production Systems to Respect OTD—Part 3: Basic Considerations for Modelling CPPS Characterized by Non-Ergodic Order Entry and Non-Deterministic Product-Mix for Fully Flexible Addressable Workstations, American Journal of Operations Research, 2022, DOI 10.4236/ajor.2022.122003, Band 12, Nr. 2, Seiten 19--63, [BibTeX][Abstract]
M. Maier, L. Weiss, K. Wegener, Autonome Parameterauswahl beim Schleifen, Jahrbuch Schleifen, Honen, Läppen und Polieren, 2022, Seiten 166--179, [BibTeX]
J. Murray, A. Speidel, A. Spierings, I. Marsha, A. Clare, Extending powder lifetime in additive manufacturing: Chemical etching of stainless steel spatter, Additive Manufacturing Letters, 2022, DOI https://doi.org/10.1016/j.addlet.2022.100057, Band 3, Nr. 100057, Seiten 7, [BibTeX][Abstract]
I. Dey, M. Fabbri, S. Gemmet, M. Wessel, K. Wegener, Manufacturing a prototype with laser direct metal deposition and laser welding made from martensitic steel 1.4313, The International Journal of Advanced Manufacturing Technology (2022), 2022, Schweiz, DOI https://doi.org/10.1007/s00170-022-10606-4, [BibTeX][Abstract][Paper]
N. Bugdayci, M. Postel, K. Wegener, Effect of material inhomogeneity on chatter stability, International Journal of Mechatronics and Manufacturing Systems, 2022, DOI 10.1504/IJMMS.2022.10051493, Band 15, Nr. 4, Seiten 264--285, [BibTeX][Abstract]
U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, Importance of Measurement and Evaluation Procedure of Particle State in Atmospheric Plasma Spraying, JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, DOI 10.1007/s11666-022-01495-w, [BibTeX]
F. Mauz, R. Wigger, T. Wahl, M. Kuffa, K. Wegener, Acoustic Roughness Measurement of Railway Tracks: Implementation of a Chord-Based Optical Measurement System on a Train, Applied Sciences, 2022, Schweiz, DOI https://doi.org/10.3929/ethz-b-000583087, Band 12(S 23), Nr. 11988, [BibTeX][Abstract][Paper]
H. Klippel, P. Samuel, M. Kuffa, K. Wegener, Automated Evaluation of Continuous and Segmented Chip Geometries Based on Image Processing Methods and a Convolutional Neural Network, Journal of Machine Engineering, 2022, Polen, ISBN 2391-8071, ISSN 1895-7595, DOI DOI: https://doi.org/10.36897/jme/156091, Band 22, [BibTeX][Abstract]
V. Ostad Ali Akbari, Y. Mohammadi, M. Kuffa, K. Wegener, Identification of in-process machine tool dynamics using forced vibrations in milling process, International Journal of Mechanical Sciences, 2022, DOI https://doi.org/10.1016/j.ijmecsci.2022.107887, Band 239, [BibTeX][Abstract][Paper]
C. Emanuele, D. Knüttel, Advances in Artificial Intelligence Methods Applications in Industrial Control Systems: Towards Cognitive Self-Optimizing Manufacturing Systems, Special Issue Advances in Artificial Intelligence Methods Applications in Industrial Control Systems, 2022, DOI https://doi.org/10.3390/app122110962, [BibTeX]
E. Relea, L. Weiss, K. Wegener, Dimensional stability of mineral cast for precision machinery, Smart, Sustainable Manufacturing in an Ever-Changing World - Springer Nature, 2022, DOI 10.1007/978-3-031-15602-1, [BibTeX]
N. Bugdayci, K. Wegener, M. Postel, Monitoring of the Average Cutting Forces from Controller Signals using Artificial Neural Networks, Journal of Machine Engineering, 2022, DOI 10.36897/jme/154801, Band 22, Nr. 4, Seiten 6--21, [BibTeX][Abstract]
F. Stoop, J. Mayr, C. Sulz, P. Kaftan, F. Bleicher, K. Yamazaki, K. Wegener, Cloud-based thermal error compensation with a federated learning approach, Precision Engineering, 2022, ISSN 0141-6359, DOI https://doi.org/10.1016/j.precisioneng.2022.09.013, Band 79, Seiten 135--145, [BibTeX][Abstract][Paper]
A. Staub, L. Brunner, A. Spierings, K. Wegener, A Machine-Learning-Based Approach to Critical Geometrical Feature Identification and Segmentation in Additive Manufacturing, Technologies, 2022, DOI https://doi.org/ 10.3390/technologies10050102, Band 10, Nr. 102, Seiten 9, [BibTeX][Abstract][Paper]
F. Mauz, R. Wigger, T. Wahl, M. Kuffa, K. Wegener, Acoustic Roughness Measurement of Railway Tracks: Laboratory Investigation of External Disturbances on the Chord-Method with an Optical Measurement Approach, Applied Sciences, 2022, Schweiz, DOI https://doi.org/10.3390/app12157732, Band 12(15), Nr. 7732, [BibTeX][Abstract][Paper]
L. Seeholzer, T. Krammer, P. Saeedi, K. Wegener, Analytical model for predicting tool wear in orthogonal machining of unidirectional carbon fibre reinforced polymer (CFRP), The International Journal of Advanced Manufacturing Technology, 2022, [BibTeX]
M. Afrasiabi, D. Keller, C. Lüthi, M. Bambach, K. Wegener, Effect of Process Parameters on Melt Pool Geometry in Laser Powder Bed Fusion of Metals: A Numerical Investigation, Procedia CIRP, 2022, [BibTeX]
D. Knüttel, S. Baraldo, A. Valente, K. Wegener, E. Carpanzano, Machine learning based track height prediction for complex tool paths in Direct Metal Deposition, CIRP Annals, 2022, [BibTeX][Abstract]
N. Zimmermann, T. Büchi,, J. Mayr, K. Wegener, Self-optimizing thermal error compensation models with adaptive inputs using Group-LASSO for ARX-models, Journal of Manufacturing Systems, 2022, DOI https://doi.org/10.1016/j.jmsy.2022.04.015, Band 64, Seiten 615--625, [BibTeX][Abstract]
Y. Rothacher, A. Nguyen Thi, E. Efthymiou, E. Werth, C. Baumann, B. Lenggenhager, P. Brugger, A. Kunz, L. Imbach, Dissociation of motor control from motor awareness in awake sleepwalkers: An EEG study in virtual reality, CORTEX, 2022, DOI 10.1016/j.cortex.2021.12.016, Band 149, Seiten 165--172, [BibTeX][Abstract][Paper]
J. Weixler, Z. Marc, K. Wegener, 300 fs pulsed laser ablation of Al2O3 ceramic and introduction of a predictive model, Materials & Design, 2022, Niederlande, DOI https://doi.org/10.1063/1.5092812, Band 217, Nr. 110614, [BibTeX][Paper]
F. Soffel, K. Papis, M. Bambach, K. Wegener, Laser Preheating for Hot Crack Reduction in Direct Metal Deposition of Inconel 738LC, Metals, 2022, Basel, Schweiz, DOI 10.3390/met12040614, [BibTeX][Abstract]
A. Zschippang, S. Weikert, K. Wegener, Face-gear drive: Simulation of shaping as manufacturing process of face-gears, Mechanism and Machine Theory, 2022, ISSN 0094-114X, DOI https://doi.org/10.1016/j.mechmachtheory.2022.104791, Band 172, Seiten 104791, [BibTeX]
H. Klippel, E. González Sánchez, I. Margolis, M. Röthlin, M. Afrasiabi, M. Kuffa, K. Wegener, Cutting force prediction of Ti6Al4V using a machine learning model of SPH orthogonal cutting process simulations, Journal of Machine Engineering, 2022, Polen, ISBN 2391-8071, ISSN 1895-7595, DOI https://doi.org/10.36897/jme/147201, Band 22, Nr. 1, Seiten 111-123, [BibTeX][Abstract]
M. Buhmann, C. Erich, E. Christian, F. Klaus, Point cloud based tool path generation for corrective machining in ultra-precision diamond turning, The International Journal of Advanced Manufacturing Technology, 2022, [BibTeX][Abstract]
V. Ostad Ali Akbari, M. Postel, M. Kuffa, K. Wegener, Improving stability predictions in milling by incorporation of toolholder sound emissions, CIRP Journal of Manufacturing Science and Technology, 2022, Band 37, Seiten 359-369, [BibTeX][Abstract][Paper]
A. Speidel, L. Gargalis, J. Ye, M. Matthews, A. Spierings, R. Hague, A. Clare, J. Murray, Chemical recovery of spent copper powder in laser powder bed fusion, Additive manufacturing, 2022, DOI https://doi.org/10.1016/j.addma.2022.102711, [BibTeX][Abstract][Paper]
F. Mauz, R. Wigger, T. Wahl, M. Kuffa, K. Wegener, Acoustic roughness measurement of railway tracks: implementation of an optical measurement approach & possible improvements to the standard, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2022, ISSN 2041-3017, DOI http://dx.doi.org/10.1177/09544097221086487, [BibTeX][Abstract][Paper]
A. Zschippang, S. Weikert, K. Wegener, Face-gear drive: Meshing efficiency assessment, Mechanism and Machine Theory, 2022, ISSN 0094-114X, DOI https://doi.org/10.1016/j.mechmachtheory.2022.104765, Band 171, Seiten 104765, [BibTeX]
T. Gittler, L. Plümke, F. Silani, P. Moro, L. Weiss, K. Wegener, People, Process, Master Data, Technology: Data-centric Engineering of Manufacturing Management Systems, Springer Nature - Lecture Notes in Production Engineering, 2022, Stellenbosch, Südafrika, [BibTeX][Abstract]
F. Soffel, Y. Lin, D. Keller, S. Egorov, K. Wegener, Laser Remelting Process Simulation and Optimization for Additive Manufacturing of Nickel-Based Super Alloys, Materials, 2021, Basel, Schweiz, DOI 10.3390/ma15010177, [BibTeX][Abstract]
M. Maier, H. Kunstmann, R. Zwicker, A. Rupenyan, K. Wegener, Autonomous and data-efficient optimization of turning processes using expert knowledge and transfer of knowledge, Journal of Materials Processing Technology, 2021, [BibTeX]
M. Spurek, L. Haferkamp, C. Weiss, A. Spierings, J. Schleifenbaum, K. Wegener, Influence of the particle size distribution of monomodal 316L powder on its flowability and processability in powder bed fusion, Progress in Additive Manufacturing, 2021, DOI 10.1007/s40964-021-00240-z, [BibTeX]
K. Wegener, S. Weikert, J. Mayr, M. Maier, V. Ostad Ali Akbari, M. Postel, Operator integrated–concept for manufacturing intelligence, Journal of Machine Engineering, 2021, Band 21, [BibTeX][Abstract]
M. Dalaee, C. Eduardo, I. Dey, L. Christian, K. Wegener, Parameters Development for Optimum Deposition Rate in Laser DMD of Stainless Steel EN X3CrNiMo13-4, Lasers in Manufacturing and Materials Processing, 2021, DOI 10.1007/s40516-021-00161-3, [BibTeX]
F. Sillani, G. de, M. Schmid, K. Wegener, Influence of packing density and fillers on thermal conductivity of polymer powders for additive manufacturing, International Journal of Advanced Manufacturing Technology, 2021, DOI 10.1007/s00170-021-07117-z, [BibTeX]
A. Speidel, L. Gargalis, J. Ye, M. Matthews, A. Spierings, R. Hague, A. Clare, J. Murray, Chemical recovery of spent copper powder in laser powder bed fusion, Additive Manufacturing, 2021, USA, [BibTeX][Abstract]
F. Verga, M. Makowska, G. Cellerai, K. Florio, M. Schmid, K. Wegener, M. Gull, Crack-healing, a Novel Approach for a Laser-based Powder Bed Fusion of High-performance Ceramic Oxides, Additive Manufacturing Letters, 2021, DOI https://doi.org/10.1016/j.addlet.2021.100021, [BibTeX][Abstract][Paper]
N. Zimmermann, B. Mario, J. Mayr, K. Wegener, Autonomously triggered model updates for self-learning thermal error compensation, CIRP Annals, 2021, DOI https://doi.org/10.1016/j.cirp.2021.04.029, Band 70, Nr. 1, Seiten 431-434, [BibTeX]
R. Weber, A. Spierings, K. Wegener, S. Seydel, A. Bergamini, D. Van, Integration of piezoelectric stacks in components using powder bed fusion, Smart Materials and Structures, 2021, DOI https://doi.org/10.1088/1361-665X/ac352f, [BibTeX][Abstract]
D. Photiou, S. Avraam, F. Sillani, F. Verga, O. Jay, L. Papadakis, Experimental and numerical analysis of 3d printed polymer tetra-petal auxetic structures under compression, Applied Sciences (Switzerland), 2021, DOI https://doi.org/10.3390/app112110362, [BibTeX]
M. Afrasiabi, J. Saelzer, S. Berger, I. Iovkov, H. Klippel, M. Röthlin, A. Zabel, D. Biermann, K. Wegener, A Numerical-Experimental Study on Orthogonal Cutting of AISI 1045 Steel and Ti6Al4V Alloy: SPH and FEM Modeling with Newly Identified Friction Coefficients, Metals, 2021, ISSN 2075-4701, DOI 10.3390/met11111683, Band 11, Seiten 1--26, [BibTeX][Abstract]
M. Spurek, H. Viet, A. Spierings, M. Lany, G. Santi, B. Revaz, K. Wegener, Relative Density Measurement of PBF-Manufactured 316L and AlSi10Mg Samples via Eddy Current Testing, Metals, 2021, DOI https://doi.org/10.3390/met11091376, [BibTeX]
M. Afrasiabi, H. Klippel, M. Röthlin, K. Wegener, An improved thermal model for SPH metal cutting simulations on GPU, Applied Mathematical Modelling, 2021, ISSN 0307-904X, DOI 10.1016/j.apm.2021.08.010, [BibTeX][Abstract]
Y. Bharat, M. Bhargavi, C. Carolyn, O. Babatunde, M. Kyle, H. Buck, Z. Jason, F. Sillani, M. Eric, C. Pedro, Mechanical and fatigue performance of pressurized vessels fabricated with Multi Jet Fusion™ for automotive applications, Additive Manufacturing, 2021, DOI https://doi.org/10.3929/ethz-b-000489824, [BibTeX]
F. Sillani, K. Wegener, M. Schmid, M. Spurek, L. Haferkamp, A. Spierings, Compaction behavior of powder bed fusion feedstock for metal and polymer additive manufacturing, Rapid Prototyping Journal, 2021, DOI 10.1108/RPJ-01-2021-0010, [BibTeX]
S. Fabbro, L. Marra, M. Kuffa, K. Wegener, K. Jens, E. Jona, Abrasive and adhesive wear behaviour of metallic bonds in a synthetic slurry test for wear prediction in reinforced concrete, Wear, 2021, ISSN 0043-1648, DOI https://doi.org/10.1016/j.wear.2021.203690, Band 476, [BibTeX][Abstract][Paper]
T. Gittler, M. Glasder, E. Öztürk, M. Lüthi, L. Weiss, K. Wegener, Milling tool wear prediction using unsupervised machine learning, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07281-2, Band 117, Nr. 7, Seiten 2213--2226, [BibTeX][Abstract]
V. Gorobets, V. Holzwarth, C. Hirt, N. Jufer, A. Kunz, A VR-based Approach in Conducting MTM for Manual Workplaces, The International Journal of Advanced Manufacturing Technology, 2021, Moscow, Russland, ISSN 0268-3768, DOI 10.1007/s00170-021-07260-7, Seiten 2501--2510, [BibTeX][Abstract][Paper]
U. Pala, S. Süßmaier, K. Wegener, Grain flash temperatures in diamond wire sawing of silicon, The International Journal of Advanced Manufacturing Technology, 2021, ISSN 1433-3015, DOI 10.1007/s00170-021-07298-7, Band 117, Nr. 7-8, Seiten 2227-2236, [BibTeX][Abstract][Paper]
L. Seeholzer, S. Süßmaier, F. Kneubühler, K. Wegener, Experimental investigation of the machining characteristics in diamond wire sawing of unidirectional CFRP, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07146-8, Nr. 117, Seiten 2197-2212, [BibTeX][Abstract]
L. Seeholzer, F. Kneubühler, F. Grossenbacher, K. Wegener, Tool wear and spring back analysis in orthogonal machining unidirectional CFRP with respect to tool geometry and fibre orientation, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07222-z, Nr. 115, Seiten 2905--2928, [BibTeX][Abstract]
H. Klippel, S. Süßmaier, M. Röthlin, M. Afrasiabi, P. Uygar, K. Wegener, Simulation of the ductile machining mode of silicon, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07167-3, [BibTeX][Abstract][Paper]
M. Gerstgrasser, M. Cloots, J. Stirnimann, K. Wegener, Residual stress reduction of LPBF-processed CM247LC samples via multi laser beam strategies, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07083-6, [BibTeX][Abstract]
P. Borges Esteves, W. Moritz, V. João, S. Maria, K. Wegener, WEDM single crater asymmetry, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07023-4, [BibTeX][Abstract][Paper]
E. Relea, B. Pfyffer, L. Weiss, K. Wegener, Experimental Comparative Investigation on Creep Behavior of Mineral Cast, Ultra-High-Performance Concrete, and Natural Stone for Precision Machinery Structures, International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07118-y, [BibTeX]
V. Holzwarth, J. Schneider, J. Handali, J. Gisler, C. Hirt, A. Kunz, J. vomBrocke, Towards estimating affective states in Virtual Reality based on behavioral data, Springer Virtual Reality - Special Issue "Virtual Reality and Cognitive Sciences", 2021, DOI 10.1007/s10055-021-00518-1, Band 25, Nr. 4, Seiten 1139--1152, [BibTeX][Abstract][Paper]
A. Spierings, K. Kern, Y. Steimer, F. Palm, K. Wegener, Assessment of Stress Corrosion Cracking Behavior of Additively Processed Al-Mg-Sc-Zr Alloy, SVOA Materials Science & Technology, 2021, London, Vereinigtes Königreich, ISSN 2634-5331, Band 3, Nr. 2, Seiten 24--35, [BibTeX][Abstract][Paper]
M. Afrasiabi, C. Lüthi, M. Bambach, K. Wegener, Multi-Resolution SPH Simulation of a Laser Powder Bed Fusion Additive Manufacturing Process, Applied Sciences, 2021, ISSN 2076-3417, DOI https://doi.org/10.3390/app11072962, Band 11, Nr. 7, Seiten 1--20, [BibTeX][Abstract][Paper][Video]
F. Soffel, D. Eisenbarth, K. Wegener, Effect of clad height, substrate thickness and scanning pattern on cantilever distortion in direct metal deposition, The International Journal of Advanced Manufacturing Technology, 2021, DOI 10.1007/s00170-021-06925-7, [BibTeX]
L. Haferkamp, A. Spierings, K. Wegener, L. Haudenschild,, K. Riener,, S. Ziegelmeier,, G. Leichtfried,, The Influence of Particle Shape, Powder Flowability, and Powder Layer Density on Part Density in Laser Powder Bed Fusion, Metals, 2021, DOI https://doi.org/10.3390/met11030418, [BibTeX][Abstract][Paper]
K. Wegener, A. Spierings, R. Teti, A. Caggiano, D. Knüttel, A. Staub, A conceptual vision for a bio-intelligent manufacturing cell for Selective Laser Melting, CIRP Journal of Manufacturing Science and Technology, 2021, DOI https://doi.org/10.1016/j.cirpj.2020.11.009, [BibTeX]
V. Ostad Ali Akbari, K. Ahmadi, Substructure analysis of vibration-assisted drilling systems, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-06777-1, Band 113, Nr. 9, Seiten 2833-2848, [BibTeX][Abstract][Paper]
P. Hernández, J. Purtschert, J. Konvicka, C. Buesser, D. Schranz, J. Mayr, K. Wegener, Reduced-Order Model of the Environmental Variation Error of a Precision Five-Axis Machine Tool, ASME Journal of Manufacturing Science and Engineering, 2021, DOI https://doi.org/10.1115/1.4047739, [BibTeX]
P. Hernández, D. Spescha, K. Wegener, Model order reduction of thermo-mechanical models with parametric convective boundary conditions: focus on machine tools, Comput Mechanics, 2021, DOI https://doi.org/10.1007/s00466-020-01926-x, [BibTeX]
M. Afrasiabi, H. Klippel, M. Röthlin, K. Wegener, Smoothed Particle Hydrodynamics Simulation of Orthogonal Cutting with Enhanced Thermal Modeling, Applied Sciences, 2021, ISSN 2076-3417, DOI 10.3390/app11031020, Band 11, Nr. 3, [BibTeX][Abstract][Paper]
M. Gerstgrasser, D. Smolenicki, M. Akbari, H. Klippel, H. Roelofs, E. Cadoni, K. Wegener, Analysis of two parameter identification methods for original and modified Johnson-Cook fracture strains, including numerical comparison and validation of a new blue-brittle dependent fracture model for free-cutting Steel 50SiB8, Theoretical and Applied Fracture Mechanics, 2021, DOI https://doi.org/10.1016/j.tafmec.2021.102905, [BibTeX][Abstract]
F. Soffel, D. Eisenbarth, E. Hosseini, K. Wegener, Interface strength and mechanical properties of Inconel 718 processed sequentially by casting, milling, and direct metal deposition, Journal of Materials Processing Technology, 2020, DOI 10.1016/j.jmatprotec.2020.117021, [BibTeX]
M. Gerstgrasser, R. Jakob, S. Pandya, J. Stirnimann, K. Wegener, CA single track microstructure simulation of nickel base alloy CM247LC and stainless steel S316L, including experimental validation of S316L, Materials & Design, 2020, DOI https://doi.org/10.1016/j.matdes.2020.109395, [BibTeX][Abstract]
M. Gerstgrasser, M. Cloots, J. Stirnimann, K. Wegener, Focus shift analysis, to manufacture dense and crack-free SLM-processed CM247LC samples, Journal of Materials Processing Technology, 2020, DOI 10.1016/j.jmatprotec.2020.116948, [BibTeX][Abstract]
N. Ackerl, M. Putzer, K. Wegener, Geometry assessment of ultra-short pulsed laser drilled micro-holes, The International Journal of Advanced Manufacturing Technology, 2020, London, [BibTeX][Abstract][Paper]
T. Gittler, S. Stephan, A. Rupenyan, K. Wegener, Machine Tool Component Health Identification with Unsupervised Learning, Journal of Manufacturing and Materials Processing - Special Issue "AI Applications in Smart and Advanced Manufacturing", 2020, Basel, Schweiz, ISSN 2504-4494, DOI https://doi.org/10.3390/jmmp4030086, Band 4, Nr. 3, Seiten 86, [BibTeX][Abstract][Paper]
F. Veenstra, N. Ackerl, A. Martin, J. Perez-Ramirez, Laser-Microstructured Copper Reveals Selectivity Patterns in the Electrocatalytic Reduction of CO2, Chem, 2020, ISSN 2451-9294, DOI 10.1016/j.chempr.2020.04.001, Band 6, Seiten 1 -- 16, [BibTeX][Abstract]
T. Semm, D. Spescha, N. Ceresa, M. Zäh, K. Wegener, Efficient Dynamic Machine Tool Simulation with Included Damping and Linearized Friction Effects, Procedia CIRP, 2020, DOI https://doi.org/10.1016/j.procir.2020.02.141, Nr. 93, Seiten 1442--1447, [BibTeX]
N. Ackerl, P. Gugger, K. Wegener, Laser marking and coloration of Ti-6Al-4V with ultrashort pulses, Journal of Laser Application, 2020, USA, ISSN 1938-1387, DOI 10.2351/7.0000021, Band 32, Nr. 3, Seiten 032013, [BibTeX][Abstract]
M. Afrasiabi, K. Wegener, 3D Thermal Simulation of a Laser Drilling Process with Meshfree Methods, Journal of Manufacturing and Materials Processing, 2020, Basel, Schweiz, DOI 10.3390/jmmp4020058, Band 4, Nr. 2, Seiten 58--77, [BibTeX][Abstract]
S. Pfeiffer, M. Makowska, K. Florio, D. Sanchez, F. Marone, X. Zhang, G. Aneziris, S. Van, K. Wegener, T. Graule, Selective laser melting of thermal pre-treated metal oxide doped aluminum oxide granules, Open Ceramics, 2020, [BibTeX]
C. Hirt, M. Spahni, Y. Kompis, D. Jetter, A. Kunz, Virtual Reality Training Platform for a Computer Numerically Controlled Grinding Machine Tool, International Journal of Mechatronics and Manufacturing Systems, 2020, ISSN 1753-1039, DOI 10.1504/IJMMS.2021.115460, Band 14, Nr. 1, Seiten 1--17, [BibTeX][Abstract][Paper]
D. Eisenbarth, P. Stoll, C. Klahn, T. Heinis, M. Meboldt, K. Wegener, Unique coding for authentication and anti-counterfeiting by controlled and random process variation in L-PBF and L-DED, Additive Manufacturing, 2020, DOI https://doi.org/10.1016/j.addma.2020.101298, Band Volume 35, Seiten 101298, [BibTeX]
H. Büttner, K. Michael, J. Gysel, P. Gugger, S. Seraina, B. de, J. Stirnimann, K. Wegener, Innovative micro-tool manufacturing using ultra-short pulse laser ablation, Journal of Materials Processing Technology, 2020, [BibTeX][Paper]
N. Zimmermann, S. Lang, P. Blaser, J. Mayr, Adaptive input selection for thermal error compensation models, CIRP Annals, 2020, DOI https://doi.org/10.1016/j.cirp.2020.03.017, Band 69, Nr. 1, Seiten 485 -- 488, [BibTeX][Abstract]
M. Maier, A. Rupenyan, B. Christian, K. Wegener, Self-optimizing grinding machines using Gaussian process models and constrained Bayesian optimization, The International Journal of Advanced Manufacturing Technology, 2020, DOI 10.1007/s00170-020-05369-9, Seiten 539-552, [BibTeX][Abstract]
M. Buhmann, R. Roth, T. Liebrich, K. Frick, E. Carelli, M. Marxer, New positioning procedure for optical probes integrated on ultra-precision diamond turning machines, CIRP Annals, 2020, DOI https://doi.org/10.1016/j.cirp.2020.04.062, [BibTeX][Abstract]
N. Ackerl, P. Gugger, M. Warhanek, J. Gysel, K. Wegener, Ultra-short Pulsed Laser Marking and Coloration of Metals with Segmented Pixel Parameter Transformation, Journal of Laser Micro/Nanoengineering, 2020, ISSN 1880-0688, DOI 10.2961/jlmn.2020.01.2001, Band 15, Nr. 1, Seiten 1-6, [BibTeX][Abstract]
N. Ackerl, K. Wegener, Observation of single ultrashort laser pulse generated periodic surface structures on linelike defects, Journal of Laser Application, 2020, USA, ISSN 1938-1387, DOI 10.2351/7.0000075, Band 32, Nr. 2, Seiten 022049, [BibTeX][Abstract]
M. Postel, N. Bugdayci, K. Wegener, Ensemble transfer learning for refining stability predictions in milling using experimental stability states, The International Journal of Advanced Manufacturing Technology, 2020, DOI 10.1007/s00170-020-05322-w, Band 107, Seiten 4123-4139, [BibTeX][Abstract]
L. Haferkamp, A. Spierings, M. Rusch,, D. Jermann,, M. Spurek, K. Wegener, Effect of Particle size of monomodal 316L powder on powder layer density in powder bed fusion, Progress in Additive Manufacturing, 2020, DOI https://doi.org/10.1007/s40964-020-00152-4, [BibTeX][Abstract]
A. Zschippang, N. Lanz, K. Küçük, S. Weikert, K. Wegener, Face-gear drive: Assessment of load sharing, transmission characteristics and root stress based on a quasi-static analysis, Mechanism and Machine Theory, 2020, ISSN 0094-114X, DOI https://doi.org/10.1016/j.mechmachtheory.2020.103914, Band 151, [BibTeX][Abstract]
M. Postel, N. Bugdayci, N. Lanz, F. Kuster, K. Wegener, Neural network supported inverse parameter identification for stability predictions in milling, CIRP Journal of Manufacturing Science and Technology, 2020, Band 29/A, Seiten 71-87, [BibTeX]
N. Zimmermann, S. Ibaraki, Self-calibration of rotary axis and linear axes error motions by an automated on-machine probing test cycle, The International Journal of Advanced Manufacturing Technology, 2020, DOI https://doi.org/10.1007/s00170-020-05105-3, Band 107, Nr. 5-6, Seiten 2107-2120, [BibTeX]
N. Ackerl, G. Fisch, J. Auerswald, K. Wegener, Evolution of microstructures on stainless steel induced by ultra-short pulsed laser ablation, SN Applied Sciences, 2020, Schweiz, DOI 10.1007/s42452-020-2447-3, Band 2, Nr. 652, [BibTeX][Abstract]
C. Hirt, M. Eckard, A. Kunz, Stress Generation and Non-intrusive Measurement in Virtual Environments Using Eye Tracking, Journal of Ambient Intelligence and Humanized Computing, 2020, Deutschland, ISSN 18685137, DOI 10.1007/s12652-020-01845-y, Seiten 5977 -- 5989, [BibTeX][Abstract][Paper]
E. Relea, V. Urundolil, C. Sánchez, C. Gschnitzer-Bärnthaler, M. Zogg, L. Weiss, K. Wegener, Utilization of CFRP in High-Speed Stamping Presses and its Gigacycle Fatigue Testing at Resonance Frequency, International Journal of Automation Technology, 2020, Japan, DOI https://doi.org/10.20965/ijat.2020.p0311, [BibTeX]
M. Afrasiabi, L. Meier, M. Röthlin, H. Klippel, K. Wegener, GPU-accelerated meshfree simulations for parameter identification of a friction model in metal machining, International Journal of Mechanical Sciences, 2020, ISSN 0020-7403, DOI https://doi.org/10.1016/j.ijmecsci.2020.105571, Band 176, [BibTeX][Abstract]
Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Walking through virtual mazes: Spontaneous alternation behaviour in human adults, Cortex, 2020, DOI 10.1016/j.cortex.2020.01.018, Seiten 1--16, [BibTeX][Abstract][Paper]
N. Ackerl, M. Warhanek, J. Gysel, K. Wegener, Ultra-short pulsed laser conditioning of metallic-bonded diamond grinding tools, Materials & Design, 2020, DOI 10.1016/j.matdes.2020.108530, Band 189, Nr. 108530, [BibTeX]
F. Verga, M. Borlaf, L. Conti, K. Florio, M. Vetterli, T. Graule, M. Schmid, K. Wegener, Laser-based powder bed fusion of alumina toughened zirconia, Additive Manufacturing, 2020, [BibTeX]
M. Dalaee, F. Cheaitani, A. Arabi-Hashemi, C. Rohrer, B. Weisse, C. Leinenbach, K. Wegener, Feasibility study in combined direct metal deposition (DMD) and plasma transfer arc welding (PTA) additive manufacturing, The International Journal of Advanced Manufacturing Technology, 2020, DOI https://doi.org/10.1007/s00170-019-04917-2, [BibTeX]
U. Pala, F. Kuster, K. Wegener, Characterization of Electroplated Diamond Wires and the Resulting Workpiece Quality in Silicon Sawing, Journal of Materials Processing Technology, 2020, DOI 10.1016/j.jmatprotec.2019.116390, Band 276, Seiten 116930, [BibTeX]
M. Dalaee, L. Gloor, C. Leinenbach, K. Wegener, Experimental and numerical study of the influence of induction heating process on build rates Induction Heating-assisted laser Direct Metal Deposition (IH-DMD), Surface and Coatings Technology, 2019, DOI https://doi.org/10.1016/j.surfcoat.2019.125275, [BibTeX]
M. Maier, T. Gittler, L. Weiss, C. Bobst, S. Scholze, K. Wegener, Sensors as an Enabler for Self-Optimizing Grinding Machines, MM Science Journal, 2019, ISSN 1803-1269, DOI 10.17973/MMSJ.2019_11_2019070, [BibTeX][Abstract][Paper]
M. Maier, Z. Ruben, M. Akbari, A. Rupenyan, K. Wegener, Bayesian optimization for autonomous process set-up in turning, CIRP Journal of Manufacturing Science and Technology, 2019, DOI https://doi.org/10.1016/j.cirpj.2019.04.005, [BibTeX][Abstract]
F. Stoop, G. Ely, R. Menna, G. Charache, T. Gittler, K. Wegener, Smart factory equipment integration through standardised OPC UA communication with companion specifications and equipment specific information models, International Journal Mechatronics and Manufacturing Systems, 2019, DOI https://doi.org/10.1504/ijmms.2019.103499, Band 12, Nr. 3/4, Seiten 344--364, [BibTeX][Abstract][Paper]
H. Büttner, M. Hajri, J. Stirnimann, M. Voegtlin, K. Wegener, A comparison between micro milling pure copper and tungsten reinforced copper for electrodes in EDM applications, Precision Engineering, 2019, DOI 10.1016/j.precisioneng.2019.08.018, Band 60, Seiten 326--339, [BibTeX][Abstract][Paper]
L. Meier, Modeling tool wear in titanium cutting with an in-process tribometer, Industrial Lubrication and Tribology, 2019, ISSN 0036-8792, DOI https://doi.org/10.1108/ilt-08-2019-0311, [BibTeX][Abstract]
C. Baumgart, K. Wegener, Investigation of the coolant fluid flow distribution in the grinding gap, Modern Machinery Science Journal, 2019, Tschechien, DOI 10.17973/MMSJ.2019_11_2019099, [BibTeX]
L. Seeholzer, D. Scheuner, K. Wegener, Analytical force model for drilling out unidirectional Carbon Fibre Reinforced Polymers (CFRP), Journal of Materials Processing Technology, 2019, DOI https://doi.org/10.1016/j.jmatprotec.2019.116489, Band 278, [BibTeX][Abstract]
P. Blaser, J. Mayr, K. Wegener, Long-Term Thermal Compensation of 5-Axis Machine Tools Due To Thermal Adaptive Learning Control, MM Science Journal, 2019, DOI 10.17973/MMSJ.2019 11 2019066, [BibTeX]
M. Röthlin, H. Klippel, M. Afrasiabi, K. Wegener, Meshless single grain cutting simulations on the GPU, International Journal of Mechatronics and Manufacturing Systems, 2019, ISSN 1753-1047, DOI https://doi.org/10.1504/IJMMS.2019.103488, Nr. 12.3-4 (2019), Seiten 272-297, [BibTeX][Abstract]
M. Makowska, S. Pfeiffer, N. Casati, K. Florio, M. Vetterli, K. Wegener, T. Graule, H. van_Swygenhoven, Pre-processing of hematite-doped alumina granules for Selective Laser Melting, Ceramics International, 2019, DOI 10.1016/j.ceramint.2019.05.251, Band 45, Nr. 14, Seiten 17014--17022, [BibTeX][Abstract]
N. Ackerl, K. Wegener, Ablation Characteristics of Alumina and Zirconia Ceramics on Ultra-short Pulsed Laser Machining, Journal of Laser Micro/Nanoengineering, 2019, Japan, ISSN 1880-0688, DOI https://doi.org/10.2961/jlmn.2019.02.0009, Band 14, Nr. 2, Seiten 5, [BibTeX][Abstract]
M. Afrasiabi, M. Röthlin, K. Wegener, Contemporary Meshfree Methods for Three Dimensional Heat Conduction Problems, Arch of Computational Methods in Engineering, 2019, ISSN 1134-3060, DOI https://doi.org/10.1007/s11831-019-09355-7, Seiten 1--35, [BibTeX][Abstract]
A. Zschippang, S. Weikert, K. Küçük, K. Wegener, Face-gear drive: Geometry generation and tooth contact analysis, Mechanism and Machine Theory, 2019, ISSN 0094-114X, DOI 10.1016/j.mechmachtheory.2019.103576, Band 142, [BibTeX][Abstract]
L. Meier, Methods to reduce variation in cutting tool life tests, The International Journal of Advanced Manufacturing Technology, 2019, DOI https://doi.org/10.1007/s00170-019-03558-9, Band 103, Nr. 1-4, Seiten 355 -- 365, [BibTeX][Abstract]
M. Afrasiabi, M. Röthlin, H. Klippel, K. Wegener, Meshfree simulation of metal cutting: an updated Lagrangian approach with dynamic refinement, International Journal of Mechanical Sciences, 2019, ISSN 0020-7403, DOI 10.1016/j.ijmecsci.2019.06.045, Nr. 160C, Seiten 451--466, [BibTeX][Abstract]
B. Paul, H. Melik, W. Tobias, J. Weixler, K. Wegener, Picosecond pulsed laser ablation of dielectric rods: Angle-dependent ablation process model for laser micromachining, Journal of Applied Physics, 2019, USA, [BibTeX][Abstract]
R. Lorenz, T. Netland, P. Roh, V. Holzwarth, A. Kunz, K. Wegener, Data-driven productivity improvement in machinery supply chains, International Journal of Mechatronics and Manufacturing Systems, 2019, DOI 10.1504/IJMMS.2019.103483, Band 12, Nr. 3/4, Seiten 255--271, [BibTeX][Abstract][Paper]
L. Seeholzer, R. Voss, L. Marchetti, K. Wegener, Experimental study: comparison of conventional and low-frequency vibration-assisted drilling (LF-VAD) of CFRP/aluminium stacks, The International Journal of Advanced Manufacturing Technology, 2019, DOI https://doi.org/10.1007/s00170-019-03837-5, Nr. 104, Seiten 433-449, [BibTeX][Abstract]
M. Postel, D. Aslan, K. Wegener, Y. Altintas, Monitoring of vibrations and cutting forces with spindle mounted vibration sensors, CIRP Annals, 2019, Band 68, Nr. 1, Seiten 413--416, [BibTeX][Abstract]
F. Sillani, K. Wegener, M. Schmid, R. Kleijnen, Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance, Additive Manufacturing, 2019, DOI 10.1016/j.addma.2019.02.004, [BibTeX]
M. Akbari, D. Smolenicki, H. Roelofs, K. Wegener, Inverse material modelling and optimization of free-cutting steel with graphite inclusions, The International Journal of Advanced Manufacturing Technology, 2019, ISSN 0268-3768, DOI 10.1007/s00170-018-3036-0, Band 101, Nr. 5–8, Seiten 1997–2014, [BibTeX][Abstract]
M. Klyuev, K. Florio, M. Akbari, K. Wegener, Influence of energy fraction in EDM drilling of Inconel 718 by statistical analysis and finite element crater-modelling, Journal of Manufacturing Processes, 2019, DOI https://doi.org/10.1016/j.jmapro.2019.03.002, Band 40, Seiten 84-93, [BibTeX][Abstract]
P. Roh, A. Kunz, K. Wegener, Information Stream Mapping: Mapping, analysing and improving the efficiency of information streams in manufacturing value streams, CIRP Journal of Manufacturing Science and Technology, 2019, Paris, Frankreich, ISSN 1755-5817, DOI https://doi.org/10.1016/j.cirpj.2019.04.004, Band 25, Seiten 1--13, [BibTeX][Abstract][Paper]
N. Ackerl, P. Börner, K. Wegener, Toward application of hierarchical structures by ultrashort pulsed laser ablation, Journal of Laser Applications, 2019, USA, ISSN 1938-1387, DOI https://doi.org/10.2351/1.5096079, Band 31, Nr. 022501, [BibTeX][Abstract]
N. Ackerl, M. Warhanek, J. Gysel, K. Wegener, Path calculation of 7-axes synchronous quasi-tangential laser manufacturing, The International Journal of Advanced Manufacturing Technology, 2019, London, ISSN 1433-3015, DOI https://doi.org/10.1007/s00170-019-03540-5, [BibTeX][Abstract]
D. Eisenbarth, P. Borges, F. Wirth, K. Wegener, Spatial powder flow measurement and efficiency prediction for laser direct metal deposition, Surface and Coatings Technology, 2019, [BibTeX]
P. Stoll, A. Spierings, K. Wegener, Impact of a process interruption on tensile properties of SS 316L parts and hybrid parts produced with selective laser melting, The International Journal of Advanced Manufacturing Technology, 2019, DOI https://doi.org/10.1007/s00170-019-03560-1, Band 103, Nr. 1-4, Seiten 367--376, [BibTeX]
S. Pfeiffer, K. Florio, M. Makowska, S. Ferreira, H. Van_Swygenhoven, G. Aneziris, K. Wegener, T. Graule, Iron Oxide Doped Spray Dried Aluminum Oxide Granules for Selective Laser Sintering and Melting of Ceramic Parts, Advanced Engineering Materials, 2019, Nr. 1801352, [BibTeX]
K. Florio, S. Pfeiffer, M. Makowska, F. Verga, N. Casati, S. Van, T. Graule, K. Wegener, An Innovative Selective Laser Melting Process for Hematite-Doped Aluminum Oxide, Advanced Engineering Materials, 2019, Nr. 1801352, [BibTeX]
F. Macedo,, M. Wiessner, C. Hollenstein,, C. Martendal,, F. Kuster,, K. Wegener,, Anode Power Deposition in Dry EDM, International Journal of Precision Engineering and Manufacturing-Green Technology, 2019, DOI https://doi.org/10.1007/s40684-019-00051-2, [BibTeX]
M. Röthlin, H. Klippel, M. Afrasiabi, K. Wegener, Metal cutting simulations using smoothed particle hydrodynamics on the GPU, Journal of Advanced Manufacturing Technology, 2019, Springer London, ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-019-03410-0, Seiten 1--13, [BibTeX][Abstract]
M. Siegrist, C. Ung, M. Zank, M. Marinello, A. Kunz, C. Hartmann, M. Menozzi, Consumers' food selection behaviors in three-dimensional (3D) virtual reality, Food Research International, 2019, DOI 10.1016/j.foodres.2018.02.033, Band 117, Seiten 50--59, [BibTeX][Abstract][Paper][Video]
M. Postel, N. Candia, N. Bugdayci, F. Kuster, K. Wegener, Development and application of an automated impulse hammer for improved analysis of five-axis CNC machine dynamics and enhanced stability chart prediction, International Journal of Mechatronics and Manufacturing Systems, 2019, DOI 10.1504/IJMMS.2019.10025076, Band 12, Nr. 3/4, Seiten 318-343, [BibTeX]
R. Voss, L. Seeholzer, F. Kuster, K. Wegener, Analytical force model for orthogonal machining of unidirectional carbon fibre reinforced polymers (CFRP) as a function of the fibre orientation, Journal of Materials Processing Technology, 2019, DOI https://doi.org/10.1016/j.jmatprotec.2018.08.001, Band 263, Seiten 440--469, [BibTeX][Abstract]
U. Pala, K. Wegener, A Novel Method for the Characterization of Diamond Wire Topography and Abrasive Grain Geometries, MM Science Journal, 2019, DOI 10.17973/mmsj.2019_11_2019076, Band 4, Seiten 3236-3242, [BibTeX]
J. Best, X. Mäder, J. Michler, A. Spierings, Mechanical Anisotropy Investigated in the Complex SLM-Processed Sc- and Zr-Modified Al–Mg Alloy Microstructure, Advanced Engineering Materials, 2018, Weinheim, Deutschland, DOI 10.1002/adem.201801113, Nr. 1801113, Seiten 6, [BibTeX][Abstract]
Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Visual capture of gait during redirected walking, Springer Nature Scientific Reports, 2018, DOI 10.1038/s41598-018-36035-6, Seiten 8:17974, [BibTeX][Abstract][Paper]
A. Spierings, K. Dawson, P. Dumitraschkewitz, S. Pogatscher, K. Wegener, Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition, Additive Manufacturing, 2018, USA, ISSN 2214-8604, DOI 10.1016/j.addma.2017.12.011, Band 20, Seiten 173--181, [BibTeX][Abstract]
K. Ruhm, Metrology and mathematics — Survey on a dual pair, Advanced Mathematical and Computational Tools in Metrology and Testing, 2018, Band Series on Advances in Mathematics for Applied Sciences, Nr. 89, Seiten 85--118, [BibTeX][Abstract]
N. Ackerl, M. Warhanek, J. Gysel, K. Wegener, Ultra-short Pulsed Laser Machining of Dental Ceramic Implants, Journal of the European Ceramic Society, 2018, DOI https://doi.org/10.1016/j.jeurceramsoc.2018.11.007, [BibTeX][Abstract]
N. Zimmermann, P. Hernández, P. Blaser, J. Mayr, Laboratory practice energy efficient production, ETH Learning and Teaching Journal, 2018, ISSN 2624-7992, Band 1, Nr. 1, [BibTeX]
R. Knoblauch, D. Boing, W. Weingärtner, K. Wegener, F. Kuster, F. Xavier, Investigation of the progressive wear of individual diamond grains in wire used to cut monocrystalline silicon, Wear, 2018, DOI 10.1016/j.wear.2018.07.025, Band 414-415, Seiten 50--58, [BibTeX][Abstract]
A. Staub, A. Spierings, K. Wegener, Correlation of Meltpool Characteristics and Residual Stresses at High Laser Intensity for Metal LPBF Process, Advances in Materials and Processing Technologies, 2018, ISSN 2374-0698, DOI 10.1080/2374068X.2018.1535643, Seiten 1--9, [BibTeX][Abstract]
D. Eisenbarth, F. Soffel, K. Wegener, Effects of direct metal deposition combined with intermediate and final milling on part distortion, Virtual and Physical Prototyping, 2018, ISSN 1745-2759, DOI 10.1080/17452759.2018.1532799, [BibTeX]
H. Dubbe, E. Holl, A. Spierings, K. Wegener, U. Nieken, Development of a spatially uniform low-temperature hydrogen combustor, Journal of Zhejiang University - Science A, 2018, China, ISSN 1862-1775, DOI 10.1631/jzus.A1700620, Band 19, Nr. 10, Seiten 735--745, [BibTeX][Abstract]
F. Wirth, K. Wegener, Simulation of the multi-component process gas flow for the explanation of oxidation during laser cladding, Additive Manufacturing, 2018, DOI https://doi.org/10.1016/j.addma.2018.10.010, Band 24, Seiten 249-256, [BibTeX][Abstract]
M. Akbari, M. Klyuev, J. Boos, K. Wegener, Flash Temperature and Force Measurements in Single Diamond Scratch Tests, The International Journal of Advanced Manufacturing Technology, 2018, ISSN 1433-3015, DOI http://dx.doi.org/10.1007/s00170-018-1930-0, Band 96, Nr. 9–12, Seiten 4393–4405, [BibTeX][Abstract]
J. Mayr, P. Blaser, A. Ryser, P. Hernández, An adaptive self-learning compensation approach for thermal errors on 5-axis machine tools handling an arbitrary set of sample rates, CIRP Annals, 2018, DOI https://doi.org/10.1016/j.cirp.2018.04.001, Band 67, Nr. 1, Seiten 551-554, [BibTeX][Abstract]
F. Wirth, K. Wegener, A physical modeling and predictive simulation of the laser cladding process, Additive Manufacturing, 2018, ISSN 2214-8604, DOI https://doi.org/10.1016/j.addma.2018.05.017, Band 22C, Seiten 307--319, [BibTeX][Abstract]
T. Bänziger, A. Kunz, K. Wegener, Optimizing Human-Robot Task Allocation using a Simulation Tool based on Standardized Work Descriptions, Journal of Intelligent Manufacturing, 2018, ISBN 0956-5515, ISSN 1572-8145, DOI 10.1007/s10845-018-1411-1, Seiten 1635--1648, [BibTeX][Abstract][Paper]
M. Wiessner, P. Blaser, S. Böhl, J. Mayr, W. Knapp, K. Wegener, Thermal test piece for 5-axis machine tools, Precision Engineering, 2018, DOI https://doi.org/10.1016/j.precisioneng.2018.01.017, Nr. 52, Seiten 407--417, [BibTeX][Abstract]
M. Afrasiabi, M. Röthlin, K. Wegener, Thermal simulation in multiphase incompressible flows using coupled meshfree and particle level set methods, Computer Methods in Applied Mechanics and Engineering, 2018, ISSN ISSN 0045-7825, DOI 10.1016/j.cma.2018.03.021, Nr. 336C, Seiten 667--694, [BibTeX][Abstract]
F. Wirth, S. Arpagaus, K. Wegener, Analysis of melt pool dynamics in laser cladding and direct metal deposition by automated high-speed camera image evaluation, Additive Manufacturing, 2018, ISSN 2214-8604, DOI https://doi.org/10.1016/j.addma.2018.03.025, Band 21, Seiten 369--382, [BibTeX][Abstract][Video]
M. Postel, O. Ozsahin, Y. Altintas, High speed tooltip FRF predictions of arbitrary tool-holder combinations based on operational spindle identification, International Journal of Machine Tools and Manufacture, 2018, DOI 10.1016/j.ijmachtools.2018.03.004, Band 129, Seiten 48--60, [BibTeX][Abstract]
M. Afrasiabi, E. Chatzi, K. Wegener, A Particle Strength Exchange Method for Metal Removal in Laser Drilling, Procedia CIRP, 2018, ISSN 2212-8271, DOI 10.1016/j.procir.2018.03.287, Nr. 72C, Seiten 1548--1553, [BibTeX][Abstract]
K. Ruhm, The signal relation diagram – A Metrological Tool?, Measurement, 2018, DOI http://dx.doi.org/10.1016/j.measurement.2017.05.060, Nr. 127, Seiten 588--595, [BibTeX][Abstract]
M. Vetterli, M. Schmid, W. Knapp, K. Wegener, New horizons in selective laser sintering surface roughness characterization, Surface Topography: Metrology and Properties, 2017, DOI https://doi.org/10.1088/2051-672X/aa88ee, Band 5, Nr. 4, Seiten 045007, [BibTeX][Abstract]
A. Spierings, K. Dawson, P. Uggowitzer, K. Wegener, Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys, Materials and Design, 2017, Vereinigtes Königreich, Band 140, Seiten 134--143, [BibTeX][Abstract]
X. Li,, T. Ivas,, A. Spierings, K. Wegener, C. Leinenbach, Phase and microstructure formation in rapidly solidi fi ed Cu-Sn and Cu-Sn-Ti alloys, Journal of Alloys and Compounds, 2017, DOI https://doi.org/10.1016/j.jallcom.2017.11.237, Band 735, Seiten 1374--1382, [BibTeX][Abstract][Paper]
M. Kuffa, F. Kuster, K. Wegener, Stochastic Kinematic Process Model with an ImplementedWear Model for High Feed Dry Grinding, Inventions, Modern Grinding Technology and Systems, 2017, Band 2, Nr. 4, [BibTeX][Abstract][Paper]
A. Mohammadi, S. Züst, J. Mayr, P. Blaser, S. Rostgaard, H. Henri, K. Wegener, A methodology for online visualization of the energy flow in a machine tool, CIRP Journal of Manufacturing Science and Technology, 2017, ISSN 1755-5817, DOI http://www.sciencedirect.com/science/article/pii/S1755581717300421, Band 19, Seiten 138--146, [BibTeX][Abstract][Paper]
M. Warhanek, J. Mayr, C. Dörig, K. Wegener, Accurate Micro-Tool Manufacturing by Iterative Pulsed-Laser Ablation, Lasers in Manufacturing and Materials Processing, 2017, ISSN 2196-7229, DOI https://doi.org/10.1007/s40516-017-0046-y, Seiten 1-12, [BibTeX][Abstract]
T. Gutowski, S. Jiang, D. Cooper, G. Corman, M. Hausman, J. Manson, T. Schudeleit, K. Wegener, M. Sabelle, J. Ramos-Grez, D. Sekulic, Note on the rate and limits for Additive Manufacturing, Journal of Industrial Ecology, 2017, [BibTeX]
C. Kenel, G. Dasargyri, T. Bauer, A. Collella, A. Spierings, C. Leinenbach, K. Wegener, Selective laser melting of an oxide dispersion strengthened (ODS) γ-TiAl alloy towards production of complex structures, Materials and Design, 2017, DOI /10.1016/j.matdes.2017.08.034, Band 134, Seiten 81--90, [BibTeX][Abstract]
B. Gurdial, S. Claudia, M. Vetterli, E. Bruno, D. Roland, B. Peter, K. Jakob, Performance of lightweight coated oxide ceramic composites for industrial high speed wood cutting tools: A step closer to market, Ceramics International, 2017, ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2017.04.005, Band 43, Nr. 12, Seiten 8735--8742, [BibTeX][Abstract]
K. Wegener, F. Bleicher, P. Krajnik, H. Hoffmeister, C. Brecher, Recent developments in grinding machines, CIRP Annals - Manufacturing Technology, 2017, DOI 10.1016/j.cirp.2017.05.006, Band 66, Nr. 2, Seiten 779--802, [BibTeX][Abstract][Paper]
R. Voss, L. Seeholzer, F. Kuster, K. Wegener, Influence of fibre orientation, tool geometry and process parameters on surface quality in milling of CFRP, CIRP Journal of Manufacturing Science and Technology, 2017, DOI https://doi.org/10.1016/j.cirpj.2016.10.002, Band 18, Seiten 75--91, [BibTeX][Abstract]
M. Cloots, L. Zumofen, A. Spierings, A. Kirchheim, K. Wegener, Approaches to minimize overhang angles of SLM parts, Rapid Prototyping Journal, 2017, Vereinigtes Königreich, ISSN 1355-2546, Band 23, Nr. 2, Seiten 362--369, [BibTeX][Abstract]
d. José, D. Mronga, M. Günther, T. Knobloch, M. Wirkus, M. Schröer, M. Trampler, S. Stiene, E. Kirchner, V. Bargsten, T. Bänziger, J. Teiwes, T. Krüger, F. Kirchner, Multimodal sensor-based whole-body control for human--robot collaboration in industrial settings, Robotics and Autonomous Systems, 2017, DOI 10.1016/j.robot.2017.04.007, Band 94, Seiten 102--119, [BibTeX][Abstract]
G. de, D. Mronga, M. Günther, M. Wirkus, M. Schrör, S. Stiene, E. Kirchner, V. Bargsten, T. Bänziger, J. Teiwes, T. Krüger, F. Kirchner, iMRK: Demonstrator for Intelligent and Intuitive Human--Robot Collaboration in Industrial Manufacturing, KI - Künstlicher Intelligenz, 2017, DOI 10.1007/s13218-016-0481-5, Band 31, Nr. 2, Seiten 203--207, [BibTeX][Abstract]
K. Wegener, J. Mayr, M. Merklein, B. Behrens, T. Aoyama, M. Sulitka, J. Fleischer, P. Groche, B. Kaftanoglu, N. Jochum, H. Möhring, Fluid elements in machine tools, CIRP Annals - Manufacturing Technology, 2017, DOI 10.1016/j.cirp.2017.05.008, Band 66, Seiten 611--634, [BibTeX][Abstract][Paper]
P. Blaser, F. Pavliček, K. Mori, J. Mayr, S. Weikert, K. Wegener, Adaptive learning control for thermal error compensation of 5-axis machine tools, Journal of Manufacturing Systems, 2017, USA, ISSN 0278-6125, DOI https://doi.org/10.1016/j.jmsy.2017.04.011, Band 44, Nr. 2, Seiten 302--309, [BibTeX][Abstract]
A. Perec, F. Pude, M. Kaufeld, K. Wegener, Obtaining the Selected Surface Roughness by Means of Mathematical Model Based Parameter Optimization in Abrasive Waterjet Cutting, 2017 Journal of Mechanical Engineering, 2017, Ljubljana, Slowenien, ISSN ISSN 0039-2480, DOI 10.5545/sv-jme.2017.4463, Band 63, Nr. 10, Seiten 606--613, [BibTeX][Abstract][Paper]
M. Schmidt, M. Merklein, D. Bourell, D. Dimitrov, T. Hausotte, K. Wegener, L. Overmeyer, F. Vollertsen, G. Levy, Laser based additive manufacturing in industry and academia, CIRP Annals - Manufacturing Technology, 2017, DOI 10.1016/j.cirp.2017.05.011, Band 66, Seiten 561--583, [BibTeX][Abstract][Paper]
A. Spierings, K. Dawson, K. Kern, F. Palm, K. Wegener, SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment, Materials Science and Engineering A, 2017, ISSN 0921-5093, Band 701, Seiten 264–-273, [BibTeX][Abstract]
M. Schmid, R. Kleijnen, M. Vetterli, K. Wegener, Influence of the Origin of Polyamide 12 Powder on the Laser Sintering Process and Laser Sintered Parts, Applied Science, 2017, Basel, Schweiz, DOI 10.3390/app7050462, Band 7, Seiten 462--477, [BibTeX][Abstract][Paper]
J. Mathew, C. Hauser, P. Stoll, C. Kenel, D. Polyzos, D. Havermann, W. MacPherson, D. Hand, C. Leinenbach, A. Spierings, K. Koenig-Urban, R. Maier, Integrating fibre Fabry-Perot cavity sensor in to 3D printed metal components for extreme high temperature monitoring applications, IEEE Sensor Journal, 2017, Band 13, Nr. 19, Seiten 4107--4114, [BibTeX][Abstract][Paper]
T. Heeling, M. Cloots, K. Wegener, Melt pool simulation for the evaluation of process parameters in selective laser melting, Additive Manufacturing, 2017, DOI http://dx.doi.org/10.1016/j.addma.2017.02.003, Band 14, Seiten 116-125, [BibTeX]
D. Flore, K. Wegener, H. Mayer, U. Karr, C. Oetting, Investigation of the high and very high cycle fatigue behaviour of continuous fibre reinforced plastics by conventional and ultrasonic fatigue testing, Composites Science and Technologie, 2017, ISSN 0266-3538, DOI http://dx.doi.org/10.1016/j.compscitech.2017.01.018, Nr. 141, Seiten 130-136, [BibTeX][Abstract]
K. Ruhm, Measurement plus observation – A new structure in metrologyr, Measurement, 2017, ISBN 0263-2241, DOI http://dx.doi.org/10.1016/j.measurement.2017.03.040, Band 126, Seiten 421--432, [BibTeX][Abstract][Paper]
F. Barata De Macedo, M. Wiessner, C. Hollenstein, P. Esteves, K. Wegener, Fundamental investigation of dry electrical discharge machining (DEDM) by optical emission spectroscopy and its numerical interpretation, The International Journal of Advanced Manufacturing Technology, 2016, DOI 10.1007/s00170-016-9687-9, Seiten 13, [BibTeX][Abstract]
A. Spierings, K. Dawson, T. Heeling, P. Uggowitzer, R. Schaeublin, F. Palm, Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting, Materials & Design, 2016, DOI doi.org/10.1016/j.matdes.2016.11.040, Band 115, Seiten 52--63, [BibTeX][Abstract]
K. Wegener, S. Weikert, J. Mayr, Age of Compensation – Challenge and Chance for Machine Tool Industry, International Journal of Automation Technology, 2016, DOI 10.20965/ijat.2016.p0609, Band 10, Nr. 4, Seiten 609--623, [BibTeX][Abstract]
T. Haas, M. Warhanek, M. Dietlicher, K. Wegener, Increased Productivity for Redundant Laser Scanners Using an Optimal Trajectory Separation Method, International Journal of Automation Technology, 2016, DOI doi: 10.20965/ijat.2016.p0941, Band 10, Nr. 6, Seiten 941--949, [BibTeX][Abstract]
T. Schudeleit, S. Züst, K. Wegener, Energy Equivalents to Quantify the Total Electricity Consumption of Factory-integrated Machine Tools, International Journal of Advanced Manufacturing Technology, 2016, DOI 10.1007/s00170-016-9659-0, Seiten 1--9, [BibTeX][Abstract]
L. Fischer, S. vonArx, U. Wechsler, S. Züst, J. Worlitschek, Phase change dispersion properties, modelling apparent heat capacity, International Journal of Refrigeration, 2016, DOI 10.1016/j.ijrefrig.2016.10.008, Band 74, Seiten 238--251, [BibTeX][Abstract]
D. Flore, K. Wegener, B. Stampfer, Experimental and numerical failure analysis of notched quasi-unidirectional laminates at room temperature and elevated temperature, Composite Structures, 2016, ISSN 0263-8223, DOI http://dx.doi.org/10.1016/j.compstruct.2016.10.046, Nr. 160, Seiten 128--141, [BibTeX][Abstract]
T. Haas, S. Weikert, K. Wegener, Distribution of motion for 5-axis machine tools utilising quasi-redundancy, International Journal of Mechatronics and Manufacturing Systems, 2016, DOI 10.1504/IJMMS.2016.079593, Band 9, Nr. 3, Seiten 254--271, [BibTeX][Abstract]
M. Kuffa, F. Kuster, K. Wegener, Comparison of lubrication conditions for grinding of mild steel with electroplated cBN wheel, CIRP Journal of Manufacturing Science and Technology, 2016, DOI doi.org/10.1016/j.cirpj.2016.09.002, Band 18, [BibTeX][Abstract][Paper]
S. Züst, F. Pavliček, L. Fischer, L. Weiss, K. Wegener, Thermo-energetic modelling of machine tool spindles with active cooling based on macro models, International Journal of Mechatronics and Manufacturing Systems, 2016, DOI 10.1504/IJMMS.2016.079585, Band 9, Nr. 3, Seiten 197--214, [BibTeX]
R. Voß, M. Henerichs, D. Harsch, F. Kuster, K. Wegener, Optimised approach for characterisation of cutting edge micro-geometry in drilling carbon fibre reinforced plastics (CFRP), The International Journal of Advanced Manufacturing Technology, 2016, DOI DOI 10.1007/s00170-016-9302-0, [BibTeX][Abstract]
M. Akbari, S. Buhl, C. Leinenbach, K. Wegener, A New Value for Johnson Cook Damage Limit Criterion in Machining with Large Negative Rake Angle as Basis for Understanding of Grinding, Journal of Materials Processing Technology, 2016, DOI http://dx.doi.org/10.1016/j.jmatprotec.2016.03.009, Band 234, Seiten 58--71, [BibTeX][Abstract]
M. Kuffa, F. Kuster, K. Wegener, A new grinding strategy to improve the acoustic properties of railway tracks, ournal of Rail and Rapid Transit, Journal of Rail and Rapid Transit, 2016, [BibTeX][Abstract]
T. Schudeleit, S. Züst, L. Weiss, K. Wegener, Machine Tool Energy Efﬁciency – A Component Mapping-Based Approach, International Journal of Automation Technology, 2016, Band 10, Nr. 5, Seiten 717--726, [BibTeX][Abstract]
R. Voß, M. Henerichs, F. Kuster, Comparison of conventional drilling and orbital drilling in machining carbon fibre reinforced plastics (CFRP), CIRP Annals - Manufacturing Technology, 2016, Guimaraes, Portugal, DOI http://dx.doi.org/10.1016/j.cirp.2016.04.001, Band 65, Nr. 1, Seiten 137-140, [BibTeX][Abstract][Paper]
P. Butler-Smith, M. Warhanek, D. Axinte, M. Fay, J. Bucourt, R. Ragueneau, K. Wegener, The influences of pulsed-laser-ablation and electro-discharge-grinding processes on the cutting performances of polycrystalline diamond micro-drills, CIRP Annals - Manufacturing Technology, 2016, DOI http://dx.doi.org/10.1016/j.cirp.2016.04.008, Band 2016, Nr. 65, Seiten 105-108, [BibTeX][Abstract]
G. Eberle, M. Schmidt, F. Pude, K. Wegener, Laser surface and subsurface modification of sapphire using femtosecond pulses, Applied Surface Science, 2016, DOI 10.1016/j.apsusc.2016.04.032, Band 378, Seiten 504–512, [BibTeX][Abstract]
A. Spierings, K. Dawson, M. Voegtlin, F. Palm, P. Uggowitzer, Microstructure and mechanical properties of as-processed Scandium-modified aluminium using Selective Laser Melting, CIRP Annals - Manufacturing Technology, 2016, DOI 10.1016/j.cirp.2016.04.057, Band 1, Nr. 65, Seiten 213--216, [BibTeX][Abstract][Paper]
D. Flore, K. Wegener, D. Seel, C. Oetting, T. Bublat, Investigation of chemical ageing and its effect on static and fatigue strength of continuous fibre reinforced plastics, Composites: Part A, 2016, ISSN 1359-835X, DOI http://dx.doi.org/10.1016/j.compositesa.2016.08.001, Nr. 90, Seiten 359-370, [BibTeX][Abstract]
M. Warhanek, C. Walter, M. Hirschi, J. Boos, J. Bucourt, K. Wegener, Comparative analysis of tangentially laser-processed fluted polycrystalline diamond drilling tools, Journal of Manufacturing Processes, 2016, DOI http://dx.doi.org/10.1016/j.jmapro.2016.06.023, Band 2016, Nr. 23, Seiten 157-164, [BibTeX][Abstract]
D. Flore, K. Wegener, Influence of fibre volume fraction and temperature on fatigue life of glass fibre reinforced plastics, AIMS Materials Science, 2016, Springfield, USA, Nr. 3, Seiten 770-795, [BibTeX][Abstract][Paper]
M. Schmid, K. Wegener, Additive Manufacturing: Polymers Applicable for Laser Sintering (LS), Proceeding Engineering, 2016, ISSN 1877-7058, DOI doi:10.1016/j.proeng.2016.06.692, Band 149, Seiten 457--464, [BibTeX][Abstract][Paper]
F. Hashimoto, H. Yamaguchi, P. Krajnik, K. Wegener, R. Chaudhari, H. Hoffmeister, Abrasive fine-finishing technology, CIRP 65/2, 2016, DOI 10.1016/j.cirp.2016.06.003, Band 65, Seiten 597--620, [BibTeX][Abstract]
S. Ibaraki, P. Blaser, M. Shimoike, N. Takayama, M. Nakaminami, Y. Ido, Measurement of thermal influence on a two-dimensional motion trajectory using a tracking interferometer, CIRP Annals, 2016, DOI http://dx.doi.org/10.1016/j.cirp.2016.04.067, Band 65, Nr. 1, Seiten 483--486, [BibTeX][Abstract]
T. Tancogne-Dejean,, A. Spierings, D. Mohr, Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading, Acta Materialia, 2016, ISSN 1359-6454, DOI http://dx.doi.org/10.1016/j.actamat.2016.05.054, Band 116, Seiten 14--28, [BibTeX][Abstract][Paper]
M. Zank, A. Kunz, Where are you going? Using human locomotion models for target estimation, The Visual Computer - International Journal of Computer Graphics, 2016, Springer, Deutschland, ISBN 0178-2789, ISSN 1432-2315, DOI 10.1007/s00371-016-1229-9, Band 32, Nr. 10, Seiten 1323--1335, [BibTeX][Abstract][Paper]
M. Akbari, W. Knapp, K. Wegener, Comparison of Transparent Objects Metrology through Diamond Cutting Edge Radii Measurements, CIRP Journal of Manufacturing Science and Technology, 2016, ISSN 1755-5817, 1878-0016, DOI http://dx.doi.org/10.1016/j.cirpj.2015.12.001, Band 13, Seiten 72--84, [BibTeX][Abstract]
F. Sellmann, T. Haas, H. Nguyên, S. Weikert, K. Wegener, Orientation Smoothing for 5-Axis Machining Using Quasi-Redundant Degrees of Freedom, International Journal of Automation Technology, 2016, Band 10, Nr. 02, Seiten 262--271, [BibTeX][Abstract]
F. Sellmann, T. Haas, H. Nguyên, S. Weikert, K. Wegener, Geometry Optimisation for 2D Cutting: A Quadratic Programming Approach, International Journal of Automation Technology, 2016, DOI 10.20965/ijat.2016.p0272, Band 10, Nr. 02, Seiten 272--281, [BibTeX][Abstract]
T. Schudeleit, S. Züst, L. Weiss, K. Wegener, The Total Energy Efficiency Index for Machine Tools, Energy, 2016, DOI http://dx.doi.org/10.1016/j.energy.2016.02.126, Band 102, Nr. 1, Seiten 682--693, [BibTeX][Abstract]
M. Pepels, R. Kleijnen, H. Goossens, A. Spoelstra, R. Tandler, H. Martens, M. Soliman, R. Duchateau, Compatibility and epitaxial crystallization between Poly(ethylene) and Poly(ethylene)-like polyesters, Polymer, 2016, DOI 10.1016/j.polymer.2016.01.035, Band 88, Seiten 63--70, [BibTeX][Abstract]
R. Voß, M. Henerichs, S. Rupp, F. Kuster, K. Wegener, Evaluation of bore exit quality for fibre reinforced plastics including delamination and uncut fibres, CIRP Journal of Manufacturing Science and Technology, 2016, Zurich, Schweiz, ISSN 1755-5817, DOI http://dx.doi.org/10.1016/j.cirpj.2015.09.003, Band 12, Seiten 56--66, [BibTeX][Abstract][Paper]
J. Mayr, M. Egeter, S. Weikert, K. Wegener, Thermal error compensation of rotary axes and main spindles using cooling power as input parameter, Journal of Manufacturing Systems, 2015, DOI 10.1016/j.jmsy.2015.04.003, Band 37, Nr. 2, Seiten 542--549, [BibTeX][Abstract]
T. Schudeleit, S. Züst, K. Wegener, Methods for Evaluation of Energy Efficiency of Machine Tools, Energy, 2015, DOI http://dx.doi.org/10.1016/j.energy.2015.10.074, Band 93, Nr. 2, Seiten 1964--1970, [BibTeX][Abstract]
G. Eberle, C. Dold, K. Wegener, Laser fabrication of diamond micro-cutting tool-related geometries using a high-numerical aperture micro-scanning system, The International Journal of Advanced Manufacturing Technology, 2015, ISSN 0268-3768, 1433-3015, DOI 10.1007/s00170-015-7240-x, Band 81, Nr. 5, Seiten 1117-1125, [BibTeX][Abstract]
M. Zank, T. Nescher, A. Kunz, Predicting audio step feedback for real walking in virtual environments, Computer Animation and Virtual Worlds, 2015, ISSN 1546-427X, DOI 10.1002/cav.1611, Band 26, Nr. 6, Seiten 537--547, [BibTeX][Abstract][Paper]
M. Cloots, P. Uggowitzer, K. Wegener, Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles, Materials and Design, 2015, ISSN 0264-1275, 0261-3069, 1873-4197, DOI 10.1016/j.matdes.2015.10.027, Band 89, Seiten 770--784, [BibTeX][Abstract]
D. Flore, K. Wegener, Modelling the mean stress effect on fatigue life of fibre reinforced plastics, International Journal of Fatigue, 2015, ISSN 0142-1123, DOI http://dx.doi.org/10.1016/j.ijfatigue.2015.09.027, Band 82, Nr. 3, Seiten 689--699, [BibTeX][Abstract]
M. Pepels, W. Hofman, R. Kleijnen, A. Spoelstra, C. Koning, H. Goossens, R. Duchateau, Block Copolymers of "PE-Like" Poly(pentadecalactone) and Poly(L-lactide): Synthesis, Properties, and Compatibilization of Polyethylene/Poly(L-lactide) Blends, Macromolecules, 2015, DOI 10.1021/acs.macromol.5b01620, Band 48, Nr. 19, Seiten 6909-6921, [BibTeX][Abstract]
P. Stoll, A. Spierings, K. Wegener, Gute Poren - Erwünschte Porosität in SLM-Werkstücken, RTejournal, 2015, Aachen, Deutschland, Band Vol. 2015, Nr. Iss. 1, [BibTeX][Abstract][Paper]
A. Perec, F. Pude, J. Stirnimann, K. Wegener, Feasibility Study On The Use Of Fractal Analysis For Evaluating The Surface Quality Generated By Waterjet, Technical Gazette, 2015, Kroatien, ISSN 1330-3651, DOI 10.17559/TV-20140128231244, Band 22, Nr. 4, Seiten 879--883, [BibTeX][Abstract][Paper]
K. Ruhm, Dynamics and Stability – A Proposal for Related Terms in Metrology from a Mathematical Point of View, Measurement (Elsevier), 2015, London, Vereinigtes Königreich, [BibTeX][Abstract][Paper]
A. Spierings, M. Voegtlin, T. Bauer, K. Wegener, Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing, Progress in Additive Manufacturing, 2015, Berlin, Deutschland, ISSN 2363-9512, DOI 10.1007/s40964-015-0001-4, Band 1, Nr. 1, Seiten 9--20, [BibTeX][Abstract][Paper]
U. Maradia, R. Knaak, W. DalBusco, M. Boccadoro, K. Wegener, A strategy for low electrode wear in meso–micro-EDM, Precision Engineering, 2015, DOI http://dx.doi.org/10.1016/j.precisioneng.2015.06.005, Band 42, Seiten 302--310, [BibTeX][Abstract]
i. Huis, L. Overmeyer, M. Schmidt, K. Wegener, A. Malshe, P. Bartolo, Micro additive manufacturing using ultra short laser pulses, CIRP Annals, 2015, ISSN 0007-8506, DOI 10.1016/j.cirp.2015.05.007, Band 64, Nr. 2, Seiten 701--724, [BibTeX][Abstract]
U. Maradia, R. Knaak, W. DalBusco, M. Boccadoro, J. Stirnimann, K. Wegener, Spark location adaptive process control in meso-micro EDM, The International Journal of Advanced Manufacturing Technology, 2015, ISSN 1433-3015, 0268-3768, DOI 10.1007/s00170-015-7316-7, Band 81, Nr. 9, Seiten 1577--1589, [BibTeX][Abstract]
L. Bochmann, L. Gehrke, A. Böckenkamp, F. Weichert, R. Albersmann, C. Prasse, C. Mertens, M. Motta, K. Wegener, Towards Decentralized Production: A Novel Method to Identify Flexibility Potentials in Production Sequences Based on Flexibility Graphs, International Journal of Automation Technology, 2015, ISBN 1881-7629, ISSN 1883-8022, DOI 10.20965/ijat.2015.p0270, Band 9, Nr. 3, Seiten 270--282, [BibTeX][Abstract][Paper]
M. Warhanek, C. Walter, S. Huber, F. Hänni, K. Wegener, Cutting characteristics of electroplated diamond tools with laser-generated positive clearance, CIRP Annals - Manufacturing Technology, 2015, DOI 10.1016/j.cirp.2015.04.010, Band 64, Seiten 317--320, [BibTeX][Abstract]
U. Maradia, M. Boccadoro, J. Stirnimann, F. Kuster, K. Wegener, Electrode wear protection mechanism in meso-micro-EDM, Journal of Materials Processing Technology, 2015, DOI 10.1016/j.jmatprotec.2015.03.039, Band 223, Seiten 22--33, [BibTeX][Abstract]
C. Leinenbach, R. Transchel, K. Gorgievski, F. Kuster, H. Elsener, K. Wegener, Microstructure and Mechanical Performance of Cu-Sn-Ti-Based Active Braze Alloy Containing In Situ Formed Nano-Sized TiC Particles, Journal of Materials Engineering and Performance, 2015, ISBN 1059-9495, ISSN 1544-1024, DOI 10.1007/s11665-015-1471-8, Band 24, Nr. 5, Seiten 2042--2050, [BibTeX][Abstract]
A. Alavi, A. Kunz, Tracking Deictic Gestures over Large Interactive Surfaces, Computer Supported Cooperative Work, 2015, JCSCW, Deutschland, ISBN 0925-9724, ISSN 1573-7551, DOI 10.1007/s10606-015-9219-4, Band 24, Nr. 2, Seiten 109-119, [BibTeX][Abstract][Paper]
A. Chandra, G. Anderson, W. Gao, H. Haitjema, K. Wegener, Role of surfaces and interfaces in solar cell manufacturing, CIRP Annals - Manufacturing Technology, 2015, Nantes, Frankreich, ISSN 0007-8506, DOI http://dx.doi.org/10.1016/j.cirp.2014.05.008, Band 63, Nr. 2, Seiten 797--819, [BibTeX][Abstract][Paper]
U. Maradia, C. Hollenstein, K. Wegener, Temporal characteristics of the pulsed electric discharges in small gaps filled with hydrocarbon oil, Journal of Physics D: Applied Physics, 2015, DOI 10.1088/0022-3727/48/5/055202, Band 48, Seiten 15, [BibTeX][Abstract]
L. Bochmann, C. Bayley, M. Helu, R. Transchel, K. Wegener, D. Dornfeld, Understanding error generation in fused deposition modeling, Surface Topography: Metrology and Properties, 2015, DOI 10.1088/2051-672X/3/1/014002, Band 3, Nr. 1, [BibTeX]
M. Gebhardt, A. Schneeberger, S. Weikert, W. Knapp, K. Wegener, Thermally Caused Location Errors of Rotary Axes of 5-Axis Machine Tools, International Journal of Automation Technology, 2014, Tokyo, Japan, ISBN 1881-7629, DOI 10.20965/ijat.2014.p0511, Band 08, Nr. 4, Seiten 511--522, [BibTeX][Abstract][Paper]
M. Henerichs, R. Voß, F. Kuster, K. Wegener, Machining of Carbon Fiber Reinforced Plastics: Influence of Tool Geometry and Fiber Orientation on the Machining Forces, CIRP Journal of Manufacturing Science and Technology, 2014, ISSN 1755-5817, 1878-0016, DOI 10.1016/j.cirpj.2014.11.002, Band 9, Seiten 136--145, [BibTeX][Abstract][Paper]
A. Spierings, M. Schöpf, R. Kiesel, K. Wegener, Optimisation of SLM productivity by aligning SLM 17-4PH material properties on part requirements, Rapid Prototyping Journal, 2014, Vereinigtes Königreich, ISSN 1355-2546, DOI 10.1108/RPJ-04-2013-0045, Band 20, Nr. 6, Seiten 444--448, [BibTeX][Abstract][Paper]
B. Rüttimann, U. Fischer, M. Stöckli, Leveraging Lean in the Office: Lean Office Needs a Novel and Differentiated Approach, Scientific Research, 2014, Seiten 352-360, [BibTeX][Paper]
M. Schmid, F. Amado, K. Wegener, Materials perspective of polymers for additive manufacturing with selective laser sintering, Journal of Materials Research, 2014, Vereinigtes Königreich, DOI 10.1557/jmr.2014.138, Band 29, Nr. 17, Seiten 1824--1832, [BibTeX][Abstract][Paper]
A. Spierings, C. Leinenbach, C. Kenel, K. Wegener, Processing of Metal-Diamond-Composites using Selective Laser Melting, Rapid Prototyping Journal, 2014, USA, ISSN 1355-2546, DOI 10.1108/RPJ-11-2014-0156, Band 21, Nr. 1, Seiten 130--136, [BibTeX][Abstract][Paper]
G. Eberle, K. Jefimovs, K. Wegener, Characterisation of thermal influences after laser processing polycrystalline diamond composites using long to ultrashort pulse durations, Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, 2014, ISSN 0141-6359, DOI 10.1016/j.precisioneng.2014.06.008, Band 39, Seiten 16--24, [BibTeX][Abstract]
K. Deibel, C. Raemy, K. Wegener, Modeling Slice-Push Cutting Forces of a Sheet Stack based on Fracture Mechanics, Engineering Fracture Mechanics, 2014, ISSN 0013-7944, DOI http://dx.doi.org/10.1016/j.engfracmech.2014.04.029, Band 124-125, Seiten 234--247, [BibTeX][Abstract]
D. Chen, S. Thiede, T. Schudeleit, C. Herrmann, A holistic and rapid sustainability assessment tool for manufacturing SMEs, CIRP Annals - Manufacturing Technology, 2014, DOI http://dx.doi.org/10.1016/j.cirp.2014.03.113, Band 63, Nr. 1, Seiten 437--440, [BibTeX][Abstract]
K. Deibel, K. Fabian, Z. Remo, M. Linus, B. Peter, K. Wegener, Longitudinal ultrasonic vibration assisted guillotining of stacked paper, Ultrasonics, 2014, ISSN 0041-624X, DOI http://dx.doi.org/10.1016/j.ultras.2014.03.013, Band 54, Nr. 6, Seiten 1585--1593, [BibTeX][Abstract]
C. Walter, T. Komischke, F. Kuster, K. Wegener, Laser-structured Grinding Tools - Generation of Prototype Patterns and Performance Evaluation, Journal of Materials Processing Technology, 2014, DOI 10.1016/j.jmatprotec.2013.11.015, Band 214, Seiten 951--961, [BibTeX][Abstract]
R. Transchel, C. Leinenbach, K. Wegener, Cutting and ploughing forces for small clearance angles of hexa-octahedron shaped diamond grains, CIRP Annals - Manufacturing Technology, 2014, ISSN 0007-8506, 1660-2773, 1726-0604, DOI 10.1016/j.cirp.2014.03.030, Band 63, Nr. 1, Seiten 325--328, [BibTeX][Abstract]
G. Vargas Evangelista, K. Wegener, F. Kuster, B. Schroeter, Simulation of the hone broaching process with diamond tools, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2014, ISSN 1678-5878, DOI 10.1007/s40430-013-0085-z, Band 36, Nr. 2, Seiten 323--333, [BibTeX][Abstract][Paper]
M. Henerichs, M. Egeter, T. Liebrich, R. Voß, K. Wegener, Evaluation of the IWF-Wunder Reproduction Method for Generating Positive Replica, International Journal of Automation Technology, 2014, Japan, ISSN 1881-7629; 1883-8022, Band Vol.8, Nr. No.1, Seiten 49--56, [BibTeX][Abstract][Paper]
J. Monnin, F. Kuster, K. Wegener, Optimal control for chatter mitigation in milling, Part 2: Experimental validation, Control engineering practice, 2013, DOI 10.1016/j.conengprac.2013.11.011, Band 24, Seiten 167--175, [BibTeX][Abstract][Paper]
J. Monnin, F. Kuster, K. Wegener, Optimal control for chatter mitigation in milling, Part 1: Modelling and control design, Control Engineering Practice, 2013, DOI 10.1016/j.conengprac.2013.11.010, Band 24, Seiten 156--166, [BibTeX][Abstract][Paper]
K. Deibel, S. Lämmlein, K. Wegener, Model of Slice-Push Cutting Forces of stacked thin Material, Journal of Materials Processing Technology, 2013, DOI http://dx.doi.org/10.1016/j.jmatprotec.2013.10.009, Band 214, Seiten 667--672, [BibTeX][Abstract]
G. Eberle, C. Dold, K. Wegener, Building a vector model representation of a two-axis laser scanhead using numerical analysis for simulation purposes, International Journal of Modelling, Identification and Control, 2013, DOI 10.1504/IJMIC.2013.057131, Band 20, Nr. 3, Seiten 119--207, [BibTeX][Abstract]
R. Transchel, F. Heini, J. Stirnimann, F. Kuster, C. Leinenbach, K. Wegener, Influence of the clearance angle on the cutting efficiency of blunt, octahedral-shaped diamonds in an active filler alloy, International Journal of Machine Tools and Manufacture, 2013, DOI 10.1016/j.ijmachtools.2013.08.001, Band 75, Seiten 9--15, [BibTeX]
H. Krötz, R. Roth, K. Wegener, Experimental Investigation and Simulation of Heatflux into Metallic Surfaces due to Single Discharges in micro Electrochemical Arc Machining (micro-ECAM), The International Journal of Advanced Manufacturing Technology, 2013, ISSN 0268-3768, DOI 10.1007/s00170-013-4918-9, Band 68, Nr. 5-8, Seiten 1267--1275, [BibTeX][Abstract][Paper]
A. Steinemann, J. Taiber, G. Fadel, K. Wegener, A. Kunz, Adapting Discrete-event Simulation Tools to Support Tactical Forecasting in the Automotive Industry, International Journal of CoCreation in Design and the Arts, 2013, ISBN 1571-0882, ISSN 1745-3755, DOI 10.1080/15710882.2013.824484, Band 9, Nr. 3, Seiten 159--177, [BibTeX][Abstract][Paper]
R. Roth, L. Beck, B. Hartmi, F. Kuster, E. Weingärtner, K. Wegener, Influence of the Anode Material and the Flushing Gas on the Dry Electrical Discharge Machining Process, International Journal of Automation Technology, 2013, Band Vol.7, Nr. No.5, Seiten 581--592, [BibTeX][Abstract]
M. Gebhardt, M. Ess, S. Weikert, W. Knapp, K. Wegener, Phenomenological Compensation of Thermally caused Position and Orientation Errors of Rotary Axes, Journal of Manufacturing Processes, 2013, DOI 10.1016/j.jmapro.2013.05.007, Band 15, Nr. 4, Seiten 452--459, [BibTeX][Abstract]
K. Deibel, K. Wegener, Methodology for Shape Optimization of Ultrasonic Amplifier using Genetic Algorithms and Simplex Method, Journal of Manufacturing Systems, 2013, USA, DOI http://dx.doi.org/10.1016/j.jmsy.2013.05.010, Band 32, Nr. 4, Seiten 523-528, [BibTeX][Abstract]
G. Heinecke, A. Syntetos, W. Wang, Forecasting-Based SKU Classification, International Journal of Production Economics, 2013, DOI 10.1016/j.ijpe.2011.11.020, Band 143, Nr. 2, Seiten 455--462, [BibTeX][Abstract]
S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Failure mechanisms and cutting characteristics of brazed single diamond grains, International Journal of Advanced Manufacturing Technology, 2013, ISSN 0268-3768, 1433-3015, DOI 10.1007/s00170-012-4365-z, Band 66, Nr. 5-8, Seiten 775--786, [BibTeX][Abstract]
A. Kunz, A. Alavi, M. Fjeld, Multistatus Interaktionsgeräte für interaktive Tische, i-com: Zeitschrift für interaktive und kooperative Medien, 2013, München, Deutschland, ISSN 1618-162X, DOI 10.1524/icom.2013.0006, Band 12, Nr. 1, Seiten 39--44, [BibTeX][Abstract][Paper]
K. Wegener, E. Weingärtner, M. Blaser, In-process wire electrical discharge dressing (IWEDD) of metal bonded diamond wheels, CIRP Annals - Manufacturing Technology, 2013, Copenhagen, Dänemark, ISSN 0007-8506, DOI http://dx.doi.org/10.1016/j.cirp.2013.03.072, Band 62, Nr. 1, Seiten 339-342, [BibTeX][Abstract]
A. Alavi, M. Fjeld, A. Kunz, Dual-channel Technology for Detecting Multi-state Devices on Tabletops, International Journal of Soft Computing and Software Engineering, 2013, ISSN 2251-7545, Seiten to be published, [BibTeX][Abstract]
T. Nescher, A. Kunz, Using Head Tracking Data for Robust Short Term Path Prediction of Human Locomotion, Transactions on Computational Science, 2013, ISSN 0302-9743, DOI 10.1007/978-3-642-38803-3_10, Band XVIII, Seiten 172--191, [BibTeX][Abstract][Paper]
A. Kunz, Collaborative Environments in the Product Ideation Phase, Advances in Computers and Information in Engineering, 2013, Seiten to appear, [BibTeX]
R. Lepratti, G. Heinecke, S. Lamparter, J. Scharnagl, R. Hansen, In Echtzeit: RFID-gestütztes Produktionsassistenzsystem, atp Edition, 2012, Deutschland, ISSN 0178-2320, Band 11/2012, Seiten 36-44, [BibTeX][Abstract]
C. Vögtlin, G. Schulz, H. Deyhle, K. Jäger, T. Liebrich, S. Weikert, B. Müller, Comparison of denture models by means of micro computed tomography, Proceedings of SPIE Volume 8506, 2012, [BibTeX][Paper]
A. Gontarz, F. Hänni, L. Weiss, K. Wegener, Machine Tool Optimization Strategies for Ecologic and Economic Efficiency, Journal of Engineering Manufacture - Volume 227 Issue 1, 2012, Vereinigtes Königreich, DOI 10.1177/0954405412464932, Band 227, Nr. 1, Seiten 54--61, [BibTeX][Abstract]
V. Wessels, A. Grigoryev, C. Dold, C. Wyen, R. Roth, E. Weingärtner, F. Pude, K. Wegener, Abrasive waterjet machining of 3D structures from bulk metallic glasses and comparison with other techniques, Journal of Materials Research 27:08, 2012, Seiten 1187--1192, [BibTeX]
J. Mayr, J. Jedrzejewski, E. Uhlmann, A. Donmez, W. Knapp, F. Härtig, K. Wendt, T. Moriwaki, P. Shore, R. Schmitt, C. Brecher, T. Wuerz, K. Wegener, Thermal issues in machine tools, Annals of the CIRP 61/2, 2012, 2012, ISSN ISSN 0007-8506, DOI 10.1016/j.cirp.2012.05.008, Band 61, Nr. 2, Seiten 771--791, [BibTeX][Abstract]
W. Knapp, G. Goch,, Precision engineering for wind energy systems, Annals of the CIRP 61/2, 2012, 2012, ISSN ISSN 0007-8506., Seiten 611--634, [BibTeX][Paper]
T. Liebrich, W. Knapp, Improvements and experimental validation of a 3D-probing system for micro-components, CIRP Annals - Manufacturing Technology, 2012, DOI http://dx.doi.org/10.1016/j.cirp.2012.03.107, Band 61, Nr. 1, Seiten 475--478, [BibTeX][Abstract][Paper]
T. Liebrich, W. Knapp, K. Wegener, Realisierung und Überprüfung eines 3D-Tastsystems für Mikro-Bauteile, tm - Technisches Messen, 2012, Deutschland, Band 80, Nr. 6, Seiten 201--205, [BibTeX][Abstract]
C. Walter, M. Rabiey, M. Warhanek, N. Jochum, K. Wegener, Dressing and truing of hybrid bonded CBN grinding tools using a short-pulsed fibre laser, CIRP Annals - Manufacturing Technology, 2012, ISSN 0007-8506, DOI 10.1016/j.cirp/2012.03.001, Band 61, Nr. 1, Seiten 279--282, [BibTeX][Abstract]
M. Rabiey, C. Walter, F. Kuster, J. Stirnimann, F. Pude, K. Wegener, Dressing of Hybrid Bond CBN Wheels Using Short-Pulse Fiber Laser, Strojniški vestnik - Journal of Mechanical Engineering, 2012, ISSN 0039-2480, DOI 10.5545/sv-jme.2011.166, Band 58, Nr. 7-8, Seiten 462--469, [BibTeX][Abstract]
M. Akbari, S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Thermomechanical Analysis of Residual Stresses In Brazed Diamond Metal Joints Using Raman Spectroscopy And Finite Element Simulation, Mechanics of Materials, 2012, ISSN 0167-6636, DOI http://dx.doi.org/10.1016/j.mechmat.2012.04.010, Band 52, Seiten 69–77, [BibTeX]
R. Transchel, C. Dold, M. Rabiey, K. Wegener, Relevance of laser touch-dressed diamond tools for the dressing performance of vitrified-bonded silicon carbide, International Journal of Abrasive Technology, 2012, ISSN 1752-2641, 1752-265X, DOI 10.1504/IJAT.2012.046828, Band 5, Nr. 1, Seiten 48--61, [BibTeX][Abstract]
E. Weingärtner, R. Roth, F. Kuster, M. Boccadoro, F. Fiebelkorn, Electrical discharge dressing and its influence on metal bonded diamond wheels, CIRP Annals - Manufacturing Technology, 2012, Hong Kong, ISSN 0007-8506, DOI http://dx.doi.org/10.1016/j.cirp.2012.03.049, Band 61, Nr. 1, Seiten 183-186, [BibTeX][Abstract]
N. Jufer, D. Politze, J. Bathelt, A. Kunz, Performance Factory - A New Approach of Performance Assessment for the Factory of the Future, Estonian Journal of Engineering, 2012, Tallinn, Estland, ISBN 1736-6038, ISSN 1736-7522, DOI 10.3176/eng.2012.1.04, Band 18, Nr. 1, Seiten 42--57, [BibTeX][Abstract][Paper]
W. Knapp, S. Ibaraki,, Indirect Measurement of Volumetric Accuracy for Three-Axis and Five-Axis Machine Tools: A Review, International Journal of Automation Technology Vol.6 No.2, 2012, p.110-124, 2012, Japan, [BibTeX]
D. Politze, S. Dierssen, K. Wegener, Function module drivers for assessing the similarity between product functions, CIRP Journal of Manufacturing Science and Technology, 2012, ISSN 1755-5817, DOI http://dx.doi.org/10.1016/j.cirpj.2011.11.001, Band 5, Nr. 1, Seiten 33--40), [BibTeX][Abstract]
S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Microstructure, residual stresses and shear strength of diamond–steel-joints brazed with a Cu–Sn-based active filler alloy, International Journal of Refractory Metals and Hard Materials, 2012, ISSN 0263-4368, DOI 10.1016/j.ijrmhm.2011.06.006, Band 30, Nr. 1, Seiten 16--24, [BibTeX][Abstract]
E. Weingärtner, K. Wegener, F. Kuster, Wire electrical discharge machining applied to high-speed rotating workpieces, Journal of Materials Processing Technology, 2012, ISSN 0924-0136, DOI 10.1016/j.jmatprotec.2012.01.005, Band 212, Nr. 6, Seiten 1298-1304, [BibTeX][Abstract]
V. Wessels, A. Grigoryev, C. Dold, C. Wyen, R. Roth, E. Weingärtner, F. Pude, K. Wegener, J. Löffler, Abrasive waterjet machining of 3D structures from bulk metallic glasses and comparison with other techniques, Journal of Materials Research, 2011, [BibTeX]
G. Reinhart, E. Genc, A. Hauptvogel, G. Heinecke, S. Lamparter, M. Ostgathe, Absicherung von Produktions- und Logistikprozessen in komplexen automobilen Wertschöpfungsnetzwerken, ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2011, Deutschland, ISSN 0947-0085, Band 12/2011, Seiten 963-968, [BibTeX][Abstract]
A. Kunz, T. Nescher, Future Entertainment Technologies, ACM Computers in Entertainment, 2011, ISSN 1544-3574, DOI 10.1145/2027456.2027457, Band 9, Nr. 3, Seiten 11.1--11.4, [BibTeX][Abstract][Paper]
A. Spierings, N. Herres, G. Levy, Influence of the particle size distribution on surface quality and mechanical properties in additive manufactured stainless steel parts, The international journal for research on additive manufacturing technologies and rapid product development, 2011, USA, ISSN 1355-2546, DOI 10.1108/13552541111124770, Band 17, Nr. 3, Seiten 195--202, [BibTeX][Abstract][Paper]
A. Kunz, Human-Computer Interaction on Tabletops, The SBC Journal on 3D Interactive Systems, 2011, Porto Alegre, Brasilien, ISSN 2236-3297, DOI 10.3929/ethz-a-006699449, Band 2, Nr. 2, Seiten 44--47, [BibTeX][Abstract][Paper]
C. Wyen, W. Knapp, K. Wegener, A new method for the characterisation of rounded cutting edges, International Journal of Advanced Manufacturing Technology, 2011, Seiten DOI: 10.1007/s00170-011-3555/4, [BibTeX]
M. Rabiey, C. Dold, R. Transchel, K. Wegener, Influence of picosecond laser touch dressing of electroplated diamond wheels on the dressing of SiC vitrified bond wheel, Advanced Material Research - Advances in Abrasive Technology XIV, 2011, ISSN 1022-6680, 1662-8985, DOI 10.4028/www.scientific.net/AMR.325.189, Band 325, Seiten 189--194, [BibTeX][Abstract][Paper]
K. Wegener, H. Hoffmeister, B. Karpuschewski, W. Hahmann, F. Kuster, M. Rabiey, Conditioning and Monitoring of Grinding Wheels, CIRP Annals 2011, Vol.60/2/2011, P.757, 2011, Budapest, Ungarn, DOI 10.1016/j.cirp.2011.05.003, Band 60, Nr. 2, Seiten 757--777, [BibTeX][Abstract]
R. Hufenus, F. Reifler, K. Maniura-Weber, A. Spierings, M. Zinn, Biodegradable Bicomponent Fibers from Renewable Sources: Melt-Spinning of Poly(lactic acid) and Poly[(3-hydroxybutyrate)-co-(3-hydroxyvalerate)], Macromolecular Materials and Engineering, 2011, Weinheim, Deutschland, ISSN 1439-2054, DOI 10.1002/mame.201100063, Band in press, [BibTeX][Abstract]
A. Spierings, M. Schneider,, R. Eggenberger,, Comparison of Density Measurement Techniques for Additive Manufactured metallic Parts, Rapid Prototyping Journal, 2011, USA, ISSN 1355-2546, Band 5, Nr. 17, [BibTeX][Abstract]
C. Dold, R. Transchel, M. Rabiey, P. Langenstein, C. Jaeger, F. Pude, F. Kuster, K. Wegener, A study on laser touch dressing of electroplated diamond wheels using pulsed picosecond laser sources, CIRP Annals - Manufacturing Technology (2011), 2011, ISSN 0007-8506, 0007-8506, DOI 10.1016/j.cirp.2011.03.117, Band 60, Nr. 1, Seiten 363--366, [BibTeX][Abstract]
T. Nescher, A. Kunz, An interactive whiteboard for immersive telecollaboration, The Visual Computer: International Journal of Computer Graphics, 2011, ISSN 0178-2789, DOI 10.1007/s00371-011-0546-2, Band 27, Nr. 4, Seiten 311--320, [BibTeX][Abstract][Paper]
N. Rüttimann, S. Buhl, K. Wegener, Simulation of Single Grain Cutting Using SPH Method, Journal of Machine Engineering, 2011, Polen, Band 10, Nr. 3, Seiten 17--29, [BibTeX]
A. Spierings, G. Levy, Rapid Manufacturing - auch mit SLM, RTejournal, 2010, Deutschland, ISSN 1614-0923, Seiten 1294--1300, [BibTeX][Abstract]
A. Ritter, S. Affolter, M. Schmid, Determination of molecular weights by size exclusion chromatography (SEC) – Results of round robin tests, Polymer Testing, 2010, [BibTeX][Paper]
S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Influence of the brazing parameters on microstructure, residual stresses and shear strength of diamond-metal joints, Journal of Materials Science, 2010, DOI 10.1007/s10853-010-4260-7, Band 45, Nr. 16, Seiten 4358--4368, [BibTeX][Abstract]
D. Kono, T. Lorenzer, S. Weikert, K. Wegener, Evaluation of modelling approaches for machine tool design, Precision Engineering, 2010, DOI 10.1016/j.precisioneng.2009.09.003, Band 34, Nr. 3, Seiten 399--407, [BibTeX][Abstract]
E. Weingärtner, S. Jaumann, F. Kuster, K. Wegener, On-machine wire electrical discharge dressing (WEDD) of metal-bonded grinding wheels, The International Journal of Advanced Manufacturing Technology, 2010, ISSN 0268-3768, Band 49, Nr. 9-12, Seiten 1001--1007, [BibTeX][Abstract]
T. Liebrich, W. Knapp, New concept of a 3D-probing system for micro-components, CIRP Annals - Manufacturing Technology, 2010, DOI http://dx.doi.org/10.1016/j.cirp.2010.03.036, Band 59, Nr. 1, Seiten 513--516, [BibTeX][Abstract][Paper]
C. Leinenbach, H. Schindler, T. Baser, N. Rüttimann, K. Wegener, Quasistatic fracture behaviour and defect assessment of brazed soft martensitic stainless steel joints, Engineering Failure Analysis, 2010, ISSN 1350-6307, Band 17, Seiten 672--682, [BibTeX][Abstract][Paper]
E. Brinksmeier,, G. Levy, D. Meyer,, A. Spierings, Surface Integrity of Selective-Laser-Melted Components, CIRP Annals Manufacturing Technology, 2010, Frankreich, DOI 10.1016 /j.cirp.2010.03.131, Band 59, Nr. 1, Seiten 601--606, [BibTeX][Abstract]
E. Weingärtner, S. Jaumann, F. Kuster, M. Boccadoro, Special wire guide for on-machine wire electrical discharge dressing of metal bonded grinding wheels, CIRP Annals - Manufacturing Technology, 2010, Pisa, Italien, Band 59, Nr. 1, Seiten 227-230, [BibTeX][Abstract]
F. Klocke, A. Klink, M. Henerichs, ELID dressing behaviour of fine grained bronze bonded diamond grinding wheels, International Journal of Abrasive Technology, 2009, ISSN 1752-2641; 1752-265X, Band 2, Nr. 4, Seiten 358-367, [BibTeX][Abstract][Paper]
E. Constanza, A. Kunz, M. Fjeld, Mixed Reality: A Survey, Lecture Notes in Computer Science - Human Machine Interaction - Research Results of the MMI Program, 2009, Berlin / Heidelberg, Deutschland, ISBN 978-3-642-00436-0, DOI 10.1007/978-3-642-00437-7_3, Band 5440, Seiten 47--68, [BibTeX][Abstract][Paper]
T. Liebrich, W. Knapp, K. Wegener, Calibration of a 3D-ball plate, Precision Engineering, 2009, Band 33, Nr. 1, Seiten 1-6, [BibTeX][Abstract]
T. Lorenzer, S. Weikert, K. Wegener, S. Bossoni, Modeling and evaluation tool for supporting decisions on the design of reconfigurable machine tools, Journal of Manufacturing Systems, 2008, [BibTeX][Abstract]
F. Pinto, G. Vargas Evangelista, K. Wegener, Simulation for Optimizing Grain Pattern on Engineered Grinding Tools, Annals of the CIRP, 2008, ISSN 0007-8506, Band 57, Nr. 1, Seiten 353--356, [BibTeX][Abstract]
G. Vargas Evangelista, K. Wegener, F. Kuster, T. Schnider, Analysis and optimization of the hard broaching process with diamond tools, International Journal on Mechatronics and Manufacturing Systems, 2008, ISSN 1753-1039, Band 1, Nr. 4, Seiten 365--376, [BibTeX][Abstract]
F. Amado, R. Jorge, J. Maria, V. Yolanda, G. Luis, Elastic tensor stiffness coefficients for SLS Nylon 12 under different degrees of densification as measured by ultrasonic technique, Rapid Prototyping Journal, 2008, ISSN 1355-2546, DOI 10.1108/13552540810907929, Band 14, Nr. 5, Seiten 260-270, [BibTeX][Paper]
R. Neugebauer,, B. Denkena, K. Wegener, Mechatronic Systems for Machine Tools, Annals of the CIRP, 2007, ISSN 00078506, DOI 10.1016/j.cirp.2007.10.007, Band 56, Nr. 2, Seiten 657--686, [BibTeX][Abstract][Paper]
C. Ganser Schwab, T. Kennel, A. Kunz, Digital support for net-based teamwork in early design stages, Journal of Design Research, 2007, USA, ISSN 1748-3050, DOI 10.1504/JDR.2007.015567, Band 6, Nr. 1/2, Seiten 150--168, [BibTeX][Abstract][Paper]
A. Jönsson, J. Bathelt, G. Broman, Implications of modelling one-dimensional impact by using a spring and damper element, Proceeding of IMechE, 2005, ISSN 1464-4193, Band 219, Nr. 5, Seiten 299--305, [BibTeX][Abstract][Paper]
A. Kunz, T. Kennel, A. Mazzone, S. Müller, Workplace to support the teamwork in the early stages of the product development process, Mécanique et Industries, 2004, Schweiz, ISSN 1296-2139, DOI 10.1051/meca:2004019, Band 5, Nr. 2, Seiten 181--187, [BibTeX][Abstract][Paper]
A. Kunz, C. Spagno, Construction of a three-sided immersive telecollaboration system, Presence: Teleoperators & Virtual Environments, 2004, USA, ISSN 1054-7460, DOI 10.1162/1054746041382410, Band 13, Nr. 2, Seiten 178--192, [BibTeX][Abstract][Paper]
A. Kunz, S. Müller, Einsatz der Informationstechnologie in der FMEA, Konstruktion - Zeitschrift für Produktentwicklung, 2000, ISBN 0005-5953, DOI 10.3929/ethz-a-006054820, Band 52, Nr. 9, Seiten 67--70, [BibTeX][Abstract][Paper]
M. Schmid, CAD/CAM system designs goldsmith's components, Technica, 1990, ISSN 0184-4067, Band 38, Nr. 22, Seiten 40--43, [BibTeX][Abstract]

Bücher

B. Rüttimann, M. Stöckli, Elements of Advanced Manufacturing Theory, 2022, DOI 10.1007/978-3-031-02047-6, [BibTeX]
M. Schmid, Laser Sintering with Plastics - Technology, Processes, and Materials, 2018, ISBN 978-1-56990-683-5, Seiten 210, [BibTeX]
M. Schmid, Additive Fertigung mit Selektivem Lasersintern (SLS), Prozess- und Werkstoffüberblick, Springer essentials, 2016, ISBN 978-3-658-12288-1, ISSN 2197-6708, DOI 10.1007/978-3-658-12289-8, [BibTeX][Abstract]
M. Schmid, Selektives Lasersintern (SLS) mit Kunststoffen, , 2015, ISBN 978-3-446-44562-8, [BibTeX]
M. Warhanek, Probabilistic Supply Chain Monitoring for Reactive Production Planning in the German Automotive Industry, 2014, ISBN 978-3-639-49446-4, [BibTeX][Abstract]
D. Günther, D. Mark, N. Lass, A. Spierings, H. Peter, M. Suter, Entwicklung und Validierung eines Rapid Protoyping Verfahrens für Tiefziehwerkzeuge aus Metall, 2013, Deutschland, ISBN 978-3-86359-140-3, Band 1, Seiten 143, [BibTeX][Abstract]
M. Popa, A. Kunz, T. Kennel, M. Precup, G. Contiu, Inovative si Procese Creative de Productie – Innovative Technologien und Kreative Produktionsprozesse, 2008, ISBN 978-973-662-421-6, [BibTeX][Paper]
M. Schmid, CAD mit NX - NX 5 und NX 6, 2008, ISBN 978-3-935340-63-2, [BibTeX][Abstract]
D. Filipoiu, A. Kunz, M. Meier, S. Müller, Technology and Technology Tools, 2003, ISBN 973-652-662-3, [BibTeX]
D. Dyntar, Modelbasierte Steuerung und Regelung eines Erdgasmotors, 2001, Seiten 125, [BibTeX]

Buchkapitel

E. Sauter, K. Wegener, Robuste Erkennung von Schleifbrand mittels maschinellen Lernens, Jahrbuch Schleifen, Honen, Läppen und Polieren, 2022, Seiten 204--215, [BibTeX]
E. Sauter, K. Wegener, Robuste Erkennung von Schleifbrand mittels machinellen Lernens, Jahrbuch Schleifen, Honen, Läppen und Polieren, 2022, ISBN 978-3-8027-3176-1, Band 70, Seiten 204--215, [BibTeX]
M. Maier, L. Weiss, K. Wegener, Autonome Parameterauswahl beim Schleifen, Jahrbuch Schleifen, Honen, Läppen und Polieren, 2022, ISBN 978-3-8027-3176-1, Band 70, Seiten 166--179, [BibTeX]
L. Clack, C. Hirt, A. Kunz, H. Sax, Experiential Training of Hand Hygiene Using Virtual Reality, Recent Advances in Technologies for Inclusive Well-Being, 2021, ISBN 978-3-030-59607-1, DOI 10.1007/978-3-030-59608-8_3, Band 196, Seiten 31--42, [BibTeX][Abstract][Paper]
U. Pala, S. Süßmaier, K. Wegener, Schnelltest für die Eignung von Diamantdraht zum Wafering, Jahrbuch Schleifen, Honen, Läppen und Polieren: Verfahren und Maschinen, 2020, [BibTeX]
M. Maier, A. Rupenyan, S. Scholze, K. Wegener, Einrichten von Schleifmaschinen auf der Basis der Bayesschen Optimierung, Jahrbuch Schleifen, Honen, Läppen und Polieren, 2020, [BibTeX]
D. Spescha, S. Weikert, K. Wegener, Simulation in the Design of Machine Tools, Reinventing Mechatronics, 2020, DOI https://doi.org/10.1007/978-3-030-29131-0_11, Seiten 163--177, [BibTeX]
A. Kunz, Der Einsatz der virtuellen Realität zur digitalen Planung von Produktionsprozessen, Virtual Reality und Augmented Reality in der Digitalen Produktion, 2020, ISBN 978-3-658-29008-5, ISSN 978-3-658-29009-2, DOI 10.1007/978-3-658-29009-2_11, Seiten 217--236, [BibTeX][Abstract][Paper]
M. Kuffa, F. Kuster, K. Wegener, Verschleißuntersuchung von Kunstharz gebundenen Schleifscheiben beim Hochleistungstrockenschleifen, Jahrbuch Schleifen, Honen, Läppen und Polieren, 2018, Deutschland, [BibTeX]
M. Kuffa, K. Wegener, High performance dry grinding, CIRP Encyclopedia of Production Engineering, 2018, [BibTeX]
C. Baumgart, K. Wegener, Optimierung der Kühlschmiermittelzufuhr beim Außenrundschleifen unter Berücksichtigung der Luftströmung, Jahrbuch Schleifen, Honen, Läppen und Polieren, 2018, ISBN 978-3-8027-3091-7, Band 68, [BibTeX]
K. Wegener, C. Baumgart, Grinding Burn, CIRP Encyclopedia of Production Engineering, 2018, ISBN 978-3-642-35950-7, [BibTeX]
A. Spierings, L. Haferkamp, D. Jermann, K. Wegener, Die Bedeutung des Pulvers in der Qualitätssicherung der Laser Powder Bed Fusion-Prozesskette, Pulvermetallurgie - Neue Herausforderungen und neue Wege, 2018, Hagen, Deutschland, ISBN 978-3-946537-54-0, Band 34, Seiten 281--304, [BibTeX][Abstract]
F. Kuster, G. O%u2019Donnell, Bonding Materials for Abrasive Tools, The International Academy for Production Engineering, CIRP Encyclopedia of Production Engineering, 2018, ISBN 978-3-642-35950-7, DOI https://doi.org/10.1007/978-3-642-35950-7, [BibTeX]
L. Bochmann, L. Gehrke, N. Gehrke, C. Mertens, O. Seiss, Innovative Konzepte einer sich selbstorganisierenden Fahrzeugmontage am Beispiel des Forschungsprojekts SMART FACE, Einführung und Umsetzung von Industrie 4.0 - Grundlagen, Vorgehensmodell und Use Cases aus der Praxis, 2016, Deutschland, ISBN 978-3-662-48504-0, DOI 10.1007/978-3-662-48505-7, Seiten 173--192, [BibTeX][Abstract][Paper]
U. Maradia, K. Wegener, EDM Modelling and Simulation, Electrical Discharge Machining (EDM): Types, Technologies and Applications, 2015, ISBN 978-1-63483-591-6, Nr. Chapter 3, Seiten 67-121, [BibTeX][Abstract]
K. Wegener, N. Rüttimann, Ploughing, CIRPedia - Encyclopedia of Production Engineering, 2014, ISBN 978-3-642-35950-7, DOI 10.1007/978-3-642-35950-7_16686-3, Seiten 1--7, [BibTeX][Abstract]
K. Wegener, Forming Presses, CIRPedia - Encyclopedia of Production Engineering, 2014, ISBN 978-3-642-20616-0, DOI 10.1007/978-3-642-20617-7_16695, Seiten 547--553, [BibTeX]
K. Wegener, F. Kuster, C. Wyen, Cutting edge influence on machining titanium alloy, CIRPedia - Encyclopedia of Production Engineering, 2014, ISBN 978-3-642-20616-0, DOI 10.1007/978-3-642-20617-7_16677, Seiten 299--311, [BibTeX][Abstract]
A. Spierings, K. Wegener, Voraussetzung Additiver Fertigung und deren Bedeutung für die industrielle Produktion, Moderne Fertigungsprozesse - Qualität und Produktivität in der Pulvermetallurgie, 2013, Hagen, Deutschland, ISBN 978-3-939935-78-0, Band 29, Seiten 193--214, [BibTeX][Abstract]
R. Transchel, C. Dold, M. Rabiey, F. Kuster, K. Wegener, Einfluss lasertouchierter Diamantabrichtwerkzeuge auf das Zerspanungsverhalten von Siliziumcarbid, Jahrbuch Schleifen, Honen, Läppen und Polieren, 2013, Deutschland, ISBN 9783802729713, Band 66, Seiten 147--158, [BibTeX]
G. Heinecke, J. Köber, R. Lepratti, S. Lamparter, A. Kunz, Event-Driven Order Rescheduling Model for Just-In-Sequence Deliveries to a Mixed-Model Assembly Line, Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services, Part I, 2013, ISSN 1868-4238, DOI 10.1007/978-3-642-40352-1_41, Band 397, Seiten 326--333, [BibTeX][Abstract][Paper]
J. Köber, G. Heinecke, The importance of managing events in a build-to-order supply chain: A case study at a manufacturer of agricultural machinery, Dynamics in Logistics: Third International Conference, LDIC 2012 Bremen, Germany, February/March 2012 Proceedings (Lecture Notes in Logistics), 2013, ISBN 978-3642359651, Seiten 175--186, [BibTeX][Abstract]
G. Heinecke, J. Köber, A. Kunz, S. Lamparter, Modeling the basic cause-effect relationship between supply chain events and performance, Lecture Notes in Logistics: Dynamics in Logistics, 2013, ISBN 978-3642359651, ISSN 2194-8917, DOI 10.1007/978-3-642-35966-8_13, Seiten 163--174, [BibTeX][Abstract][Paper]
W. Knapp, Grundprinzip und Gerätetechnik, Kapitel 3 in Weckenmann, A., Koordinatenmesstechnik, 2. Ausgabe. Carl Hanser Verlag, München, 2012, 2012, München, Deutschland, ISBN ISBN 978-3-446-40739-8, [BibTeX]
W. Knapp, Typical Applications, Chapter 16 in Coordinate Measuring Machines and Systems, 2012, ISBN 978-1-57444-652-4, Seiten 413--466, [BibTeX]
D. Politze, J. Bathelt, K. Wegener, D. Begsjö, Integrated Modeling of Functions and Requirements in Product Design and Factory Planning, Intelligent Automation and Systems Engineering, 2011, ISBN 978-1-4614-0372-2, Band 103, Seiten 217--229, [BibTeX]
A. Kunz, M. Fjeld, From Table–System to Tabletop: Integrating Technology into Interactive Surfaces, Tabletops - Horizontal Interactive Displays, 2010, ISBN 978-1-84996-112-7, Band Human-Computer Interaction Series, Nr. Tabletops - Horizontal Interactive Displays, Seiten 53--72, [BibTeX][Abstract][Paper]
M. Schmid, G. Levy, Lasersintermaterialien – aktueller Stand und Entwicklungspotential, Fachtagung: Additive Fertigung - vom Prototyp zur Serie, 2009, ISBN 978-3-931864-47-7, [BibTeX][Paper]
S. Minocchieri, J. Burren, M. Bachmann, G. Stern, J. Wildhaber, S. Buob, R. Schindel, R. Kraemer, U. Frey, M. Nelle, Development of the premature infant nose throat-model (PrINT-Model): an upper airway replica of a premature neonate for the study of aerosol delivery., Pediatr Res, 2008, Schweiz, Seiten 141--146, [BibTeX][Abstract]
R. Schindel, A. Flisch, S. Buob, Prähistorisches Nashorn mit Termin beim Radiologen, BERICHTE DER ST.GALLISCHEN NATURWISSENSCHAFTLICHEN GESELLSCHAFT, 2008, St.Gallen, Schweiz, ISBN 978-3-908151-46-3, Band 91, Seiten 135--145, [BibTeX][Abstract][Paper]
R. Zhang, P. Lochmatteer, G. Kovacs, A. Kunz, F. Conti, Portable force feedback device based on miniature rolled dielectric elastomer actuators, Dielectric Elastomers as Electromechanical Transducers, 2008, ISBN 978-0-08-047488-5, DOI 10.1016/B978-0-08-047488-5.00020-4, Seiten 207--216, [BibTeX][Abstract][Paper]
M. Flemming, S. Roth, Faserverbundbauweisen. Eigenschaften - Mechanische, konstruktive, thermische, elektrische, ökologische, wirtschaftliche Aspekte, 2003, ISBN 978-3-540-00636-7, Seiten 463--522, [BibTeX][Abstract][Paper]

Technische Berichte

A. Fischer, D. Spescha, T. Semm, N. Ceresa, M. Zäh, Der digitale Zwilling der Werkzeugmaschine, wt Werkstattstechnik online, 2021, Deutschland, DOI https://doi.org/10.37544/1436-4980-2021-03-87, Band 111, Nr. 03, Seiten 179--183, [BibTeX][Abstract]
T. Gittler, R. Lorenz, Help me to help you – The role of AI in supporting manufacturing workers, 2020 World Manufacturing Report, 2020, Zürich, Schweiz, ISBN 978-88-94386-16-5, Seiten 82--83, [BibTeX][Paper]
M. Schmid, AM mit Kunststoffen - Trends und neue Konzepte, KunststoffXtra, 2016, Schweiz, ISSN 1664-3933, Band 12/2016, Seiten 39--41, [BibTeX][Abstract][Paper]
J. Pfaff, M. Warhanek, P. Butler-Smith, Ninth DIPLAT Newsletter: Project Overview, 2016, [BibTeX][Paper]
C. Rudolf, F. Hänni, J. Pfaff, M. Warhanek, Eight DIPLAT Newsletter: Structured Dressing Tools, 2016, [BibTeX][Paper]
P. Butler-Smith, J. Pfaff, M. Warhanek, Seventh DIPLAT Newsletter: Subsurface material analyses, 2016, [BibTeX][Abstract][Paper]
Y. Zhou, P. Butler-Smith, D. Axinte, J. Pfaff, M. Warhanek, Sixth DIPLAT Newsletter: Engineered Grinding Tools, 2015, [BibTeX][Paper]
J. Bucourt, F. Paggi, R. Ragueneau, P. Butler-Smith, J. Pfaff, M. Warhanek, Fifth DIPLAT Newsletter: Benchmarking of PCD Micro Tools, 2015, DOI 10.13140/RG.2.1.2157.3603, [BibTeX][Paper]
C. Dold, M. Hirschi, B. Frei, C. Bouvier, J. Pfaff, M. Warhanek, Fourth DIPLAT Newsletter: Synchronized Laser Processing, 2015, DOI 10.13140/RG.2.1.1612.7848, [BibTeX][Paper]
C. Bouvier, P. Butler-Smith, J. Pfaff, M. Warhanek, Third DIPLAT Newsletter: Laser CNC Control, CAM Systems and PLA simulation, 2015, DOI 10.13140/RG.2.1.4321.9044, [BibTeX][Abstract][Paper]
C. Wort, J. Pfaff, M. Warhanek, Second DIPLAT Newsletter: Ultra Hard Materials, 2015, DOI 10.13140/RG.2.1.4977.2648, [BibTeX][Abstract][Paper]
T. Schudeleit, L. Weiss, R. Züst, Eco-Design: Entwicklung energieeffizienter Maschinen und Geräte, 2015, Zürich, Schweiz, [BibTeX]
M. Schmid, Additive Manufacturing (AM) auf dem Weg in die Produktion, KunststoffXtra, 2014, Schweiz, Seiten 6--9, [BibTeX][Paper]
F. Amado, M. Schmid, K. Wegener, Modelling of Polymer Crystallization for SLS-Processing, BIT's 1st Annual World Congress of 3D Printing 2014, 2014, Dalian, China, [BibTeX][Abstract]
C. Walter, M. Warhanek, First DIPLAT Newsletter: Enabling advanced functionalities of Diamond and other ultra-hard materials by Integrated Pulsed Laser Ablation Technologies, 2013, DOI DOI: 10.13140/RG.2.1.4715.1207, [BibTeX][Abstract][Paper]
R. Züst, L. Weiss, A. Gontarz, J. Hauenstein, Eco-effiziente Produktionsmaschinen in moderner Haustechnik bei METTLER TOLEDO -, 2013, Zürich, Schweiz, [BibTeX]
A. Spierings, Selective Laser Melting im Fokus, Swiss Engineering - Schweizerische Technische Zeitschrift, 2013, Zürich, Schweiz, ISSN 1660-4121, [BibTeX][Abstract][Paper]
R. Schindel, R. Bauer, G. Hildebrandt, R. Artusi, A new and efficient method to produce presurgical and patient specific cranial calottes, CTI MEDTECH AWARD 2011, 2011, Bern, Schweiz, [BibTeX][Abstract][Paper]
M. Schmid, Werkstoffe für das selektive Lasersintern (SLS), Kunststoff Xtra, 2011, Schweiz, Band 1-3/2011, Seiten 24--25, [BibTeX]
T. Lorenzer, L. Weiss, Leitfaden TCO, 2007, Zürich, Schweiz, [BibTeX]

Dissertationen

C. Hirt, Predictive Multiuser Redirected Walking Using Artificial Potential Fields, 2023, Diss-Nr. 29140, [BibTeX][Abstract]
Referenten: A. Kunz, K. Wegener, C. Holz
A. Staub, Mitigation of Thermal History-related Issues in Selective Laser Melting, 2022, Diss-Nr. 28562, [BibTeX][Abstract]
Referenten: K. Wegener, D. Brabazon
H. Klippel, Constitutive Equations for Simulation of Metal Cutting with Meshless Methods on GPU, 2022, Diss-Nr. 27671, [BibTeX][Abstract]
Referenten: K. Wegener, P. Hora
L. Seeholzer, Zerspanung von CFK und CFK/Aluminium-Stacks, 2021, Diss-Nr. 27856, [BibTeX]
Referenten: K. Wegener, F. Bleicher
A. Zschippang, Design, Analysis and Manufacturing of Face-Gear Drives, 2021, Diss-Nr. 27912, [BibTeX]
Referenten: K. Wegener, B. Schlecht
A. Nguyen Thi, Identification of Redirected Walking Thresholds in Immersive Virtual Environments, 2021, Diss-Nr. 27496, [BibTeX][Abstract]
Referenten: K. Wegener, A. Kunz, P. Brugger
T. Bauer, Prediction of Process Parameters in Selective Laser Melting, 2021, Diss-Nr. 27160, [BibTeX][Abstract]
Referenten: K. Wegener, M. Meboldt
M. Wiessner, Design of spatial and time resolved plasma diagnostics for small gap discharges, 2021, Diss-Nr. 27397, [BibTeX][Abstract]
Referenten: K. Wegener, C. Hollenstein, A. Schubert
M. Gerstgrasser, Selective laser melting of CM247LC, 2021, Diss-Nr. 27898, [BibTeX][Abstract]
Referenten: K. Wegener, F. Haas
S. Böhl, Error Identification and Error Correction for Spindle Test Setups, 2020, Diss-Nr. 27088, [BibTeX][Abstract]
Referenten: A. Andreas, K. Wolfgang
D. Eisenbarth, Buildup strategies for additive manufacturing by direct metal deposition, 2020, Diss-Nr. 26907, [BibTeX][Abstract]
Referenten: K. Wegener, M. Meboldt
J. Kubenke, Smart Works - Objektive Bewertungsmethode für Werkerinformationssysteme, 2020, Diss-Nr. 26677, [BibTeX][Abstract]
Referenten: K. Wegener, A. Kunz, A. Verl
P. Stoll, Functionality integration in powder bed based additive manufacturing processes, 2020, Diss-Nr. 26800, [BibTeX][Abstract]
Referenten: K. Wegener, M. Meboldt
A. Alavi, A Framework for Optimal In-Air Gesture Recognition in Collaborative Environments, 2020, Diss-Nr. 26416, [BibTeX][Abstract]
Referenten: K. Wegener, A. Kunz, M. Fjeld
P. Hernández, Efficient Thermal Error Models of Machine Tools, 2020, Diss-Nr. 26766, [BibTeX]
Referenten: K. Wegener, d. López
U. Pala, Experimental Investigation and Modeling of Diamond Wire Sawing of Single-Crystal Silicon, 2020, Diss-Nr. 26325, [BibTeX]
Referenten: K. Wegener, F. Bleicher, B. Azarhoushang
C. Baumgart, Fluid Supply in Cylindrical Grinding, 2020, Diss-Nr. 27147, [BibTeX][Abstract]
Referenten: K. Wegener, C. Heinzel
M. Zank, Estimation and Prediction of Human Locomotion Paths in Immersive Virtual Environments, 2019, Diss-Nr. 26336, [BibTeX][Abstract]
Referenten: K. Wegener, A. Kunz, M. Fjeld, D. Agotai
K. Le, Designing to Support Workspace Awareness in Remote Collaboration using 2D Interactive Surfaces, 2019, Diss-Nr. Chalmers, [BibTeX][Abstract]
Referenten: M. Fjeld, A. Kunz
P. Roh, Methoden zur datengetriebenen Lokalisierung des Verbesserungspotentials in Produktionsabläufen, 2019, Diss-Nr. 26246, [BibTeX][Abstract]
Referenten: A. Kunz, T. Netland, K. Wegener
T. Bänziger, Intelligente Montgeassistenten - Konzepte zur Planung und Programmierung der Zusammenarbeit zwischen Mensch und Roboter, 2019, Diss-Nr. 25690, [BibTeX][Abstract]
Referenten: K. Wegener, A. Verl, A. Kunz
F. Wirth, Process understanding, modeling and predictive simulation of laser cladding, 2018, Diss-Nr. 25555, [BibTeX][Abstract]
Referenten: K. Wegener, R. Spolenak
T. Haas, Set Point Optimisation for Machine Tools, 2018, Diss-Nr. 24937, [BibTeX][Abstract]
Referenten: T. Haas
A. Spierings, Powder spreadability and characterization of Sc- and Zr-modified Aluminium alloys processed by Selective Laser Melting - Quality Management System for additive manufacturing, 2018, Diss-Nr. 24721, [BibTeX][Abstract]
Referenten: A. Spierings
M. Cloots, Empirische und simulative Studie über die Verarbeitbarkeit von IN738LC mittels SLM, 2018, Diss-Nr. 24270, [BibTeX][Abstract]
Referenten: K. Wegener, G. Levy,, P. Uggowitzer,
L. Bochmann, Entwicklung und Bewertung eines flexiblen und dezentral gesteuerten Fertigungssystems für variantenreiche Produkte, 2018, Diss-Nr. 24466, [BibTeX][Abstract]
Referenten: K. Wegener, H. Heyn, A. Kunz
R. Voß, Fundamentals of Carbon Fibre Reinforced Polymer (CFRP) Machining, 2017, Diss-Nr. 24283, [BibTeX][Abstract]
Referenten: K. Wegener, F. Bleicher
D. Smolenicki, Chip formation analysis of innovative graphitic steel in drilling processes, 2017, Diss-Nr. 24000, [BibTeX][Abstract]
Referenten: K. Wegener, H. Roelofs
T. Schudeleit, Total Energy Efficiency of Factory-Integrated Machine Tools, 2017, Diss-Nr. 24214, [BibTeX]
Referenten: K. Wegener, P. Schönsleben
S. Züst, Model Based Optimization of Internal Heat Sources in Machine Tools, 2017, Diss-Nr. 24482, [BibTeX]
Referenten: K. Wegener, C. Herrmann
M. Henerichs, Bohrbearbeitung von CFK unter besonderer Berücksichtigung der Schneidkantengeometrie, 2015, Diss-Nr. 22629, [BibTeX]
Referenten: K. Wegener, F. Bleicher
R. Transchel, Cutting mechanism of active brazed single diamond grains, 2015, Diss-Nr. 22156, [BibTeX][Abstract]
Referenten: K. Wegener, B. Karpuschewski, C. Leinenbach
C. Walter, Conditioning of Hybrid Bonded CBN Tools with Short and Ultrashort Pulsed Lasers, 2014, Diss-Nr. 22334, [BibTeX][Abstract]
Referenten: K. Wegener, F. Kuster, W. Weingärtner, G. Dumitru
R. Roth, Trockene Funkenerosion, 2014, Diss-Nr. 22025, [BibTeX][Abstract]
Referenten: K. Wegener, H. Christoph
U. Maradia, Meso - Micro EDM, 2014, Diss-Nr. 22024, [BibTeX][Abstract]
Referenten: K. Wegener, M. Boccadoro, I. Beltrami
K. Deibel, Vibration Assisted Guillotining of Stacked Thin Material, 2014, Diss-Nr. 21667, [BibTeX][Abstract]
Referenten: K. Wegener, P. Hora
G. Heinecke, Resilient automotive production in vulnerable supply networks: a supply chain event management system, 2013, Diss-Nr. 21551, [BibTeX][Abstract]
Referenten: K. Wegener, A. Kunz, R. Lepratti, S. Lamparter
C. Dold, Picosecond laser processing of diamond cutting edges, 2013, Diss-Nr. 21598, [BibTeX][Abstract]
Referenten: K. Wegener, R. Poprawe, F. Pude
B. Migge, Strategic Decision Making under Uncertainty Tailored to Parallax Correction and Energy Production, 2013, Diss-Nr. 21443, [BibTeX][Abstract]
Referenten: K. Wegener, P. Hora, A. Kunz
E. Weingärtner, On-Machine Wire Electrical Discharge Dressing of Metal Bonded Grinding Wheels, 2013, Diss-Nr. 20835, [BibTeX][Abstract]
Referenten: K. Wegener, F. Kuster, B. Marco
S. Buhl, Failure mechanisms of heavily-loaded brazed diamonds, 2012, Diss-Nr. 20386, [BibTeX]
Referenten: K. Wegener, R. Spolenak, C. Leinenbach
T. Liebrich, 3D-Probing System for Micro-Components, 2012, Diss-Nr. 20282, [BibTeX][Abstract]
Referenten: K. Wegener, W. Knapp, P. Hora
A. Steinemann, Interactive collaboration for mechatronic systems engineering, 2012, Diss-Nr. 20273, [BibTeX][Abstract]
Referenten: K. Wegener, P. Hora, A. Kunz, J. Taiber, G. Fadel
C. Ganser Schwab, Combining and Extending Concepts of Single Display Groupware and Tangible User Interfaces for Intuitive Collaboration, 2011, Diss-Nr. 19548, [BibTeX][Abstract]
Referenten: K. Wegener, M. Fjeld, A. Kunz
R. Hofer, Tracking Technologies for Interactive Tabletop Surfaces, 2011, Diss-Nr. 19654, [BibTeX][Abstract]
Referenten: K. Wegener, P. Hora, A. Kunz, M. Fjeld
J. Mayr, Beurteilung und Kompensation des Temperaturgangs von Werkzeugmaschinen, 2010, Diss-Nr. 18667, [BibTeX]
Referenten: K. Wegener, O. Zirn, S. Weikert
G. Vargas Evangelista, Analyse und Simulation des Prozesses Honräumen von gehärteten Innenprofilen mit Diamantwerkzeugen, 2010, Diss-Nr. 19182, [BibTeX][Abstract]
Referenten: