Journal Publications

• I. Dey, F. Raphael, K. Karsten, R. Christian, K. Wegener, Mechanical Properties and Microstructure Analysis of Additive/Conventional Manufactured 1.4313 Soft Martensitic Steel, Additive Manufacturing, 2023, [BibTeX][Abstract]
  
  
• U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, In Situ Spatially Resolved Coating Thickness Measurements in Thermal Spraying, Journal of Thermal Spray Technology, 2023, DOI 10.1007/s11666-023-01656-5, [BibTeX]
  
  
• D. Keller, K. Wegener, T. Schudeleit, A. Monney, Spatial Oxygen Distribution of the Direct Metal Deposition Process for Different Powder Nozzles, Applied Sciences, 2023, [BibTeX]
  
  
• V. Ostad Ali Akbari, M. Kuffa, K. Wegener, Physics-informed Bayesian machine learning for probabilistic inference and refinement of milling stability predictions, CIRP Journal of Manufacturing Science and Technology, 2023, DOI https://doi.org/10.1016/j.cirpj.2023.07.004, Volume 45, Pages 225--239, [BibTeX][Abstract][Paper]
  
  
• S. Arne, L. Cheng, N. Torbjørn, Augmented reality for industrial quality inspection: An experiment assessing task performance and human factors, Computers in Industry, 2023, DOI https://doi.org/10.1016/j.compind.2023.103985, Volume 151, [BibTeX][Abstract][Paper]
  
  
• F. Mauz, R. Wigger, L. Griesbaum, T. Wahl, M. Kuffa, K. Wegener, Acoustic Roughness Measurement of Railway Tracks: Running Surface Detection and Compensation of Lateral Movements for Optical Measurements on a Train, Sensors, 2023, Switzerland, DOI https://doi.org/10.3390/s23125764, Volume 23(12), Issue 5764, [BibTeX][Abstract][Paper]
  
  
• F. Stoop, M. Severin, C. Patrick, J. Mayr, K. Wegener, Multi-variable rotor dynamics optimization of an aerostatic spindle, CIRP Journal of Manufacturing Science and Technology, 2023, ISSN 1755-5817, DOI https://doi.org/10.1016/j.cirpj.2023.01.006, Volume 42, Pages 12-23, [BibTeX][Abstract][Paper]
  
  
• N. Zhang, H. Klippel, M. Afrasiabi, M. Röthlin, M. Kuffa, M. Bambach, K. Wegener, Hybrid SPH-FEM solver for metal cutting simulations on the GPU including thermal contact modeling, CIRP Journal of Manufacturing Science and Technology, 2023, ISSN 1755-5817, DOI https://doi.org/10.1016/j.cirpj.2022.12.012, Volume 41, Pages 311-327, [BibTeX][Paper]
  
  
• U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, Analysis and Comparison of Two Different Sensing Techniques for In Situ Coating Thickness Measurements, JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, DOI 10.1007/s11666-022-01508-8, [BibTeX]
  
  
• B. Rüttimann, M. Stöckli, Exploiting Virtual Elasticity of Production Systems to Respect OTD—Part 3: Basic Considerations for Modelling CPPS Characterized by Non-Ergodic Order Entry and Non-Deterministic Product-Mix for Fully Flexible Addressable Workstations, American Journal of Operations Research, 2022, DOI 10.4236/ajor.2022.122003, Volume 12, Issue 2, Pages 19--63, [BibTeX][Abstract]
  
  
• M. Maier, L. Weiss, K. Wegener, Autonome Parameterauswahl beim Schleifen, Jahrbuch Schleifen, Honen, Läppen und Polieren, 2022, Pages 166--179, [BibTeX]
  
  
• J. Murray, A. Speidel, A. Spierings, I. Marsha, A. Clare, Extending powder lifetime in additive manufacturing: Chemical etching of stainless steel spatter, Additive Manufacturing Letters, 2022, DOI https://doi.org/10.1016/j.addlet.2022.100057, Volume 3, Issue 100057, Pages 7, [BibTeX][Abstract]
  
  
• I. Dey, M. Fabbri, S. Gemmet, M. Wessel, K. Wegener, Manufacturing a prototype with laser direct metal deposition and laser welding made from martensitic steel 1.4313, The International Journal of Advanced Manufacturing Technology (2022), 2022, Switzerland, DOI https://doi.org/10.1007/s00170-022-10606-4, [BibTeX][Abstract][Paper]
  
  
• N. Bugdayci, M. Postel, K. Wegener, Effect of material inhomogeneity on chatter stability, International Journal of Mechatronics and Manufacturing Systems, 2022, DOI 10.1504/IJMMS.2022.10051493, Volume 15, Issue 4, Pages 264--285, [BibTeX][Abstract]
  
  
• U. Hudomalj, S. Fallahi, L. Weiss, M. Nabavi, K. Wegener, Importance of Measurement and Evaluation Procedure of Particle State in Atmospheric Plasma Spraying, JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2022, DOI 10.1007/s11666-022-01495-w, [BibTeX]
  
  
• F. Mauz, R. Wigger, T. Wahl, M. Kuffa, K. Wegener, Acoustic Roughness Measurement of Railway Tracks: Implementation of a Chord-Based Optical Measurement System on a Train, Applied Sciences, 2022, Switzerland, DOI https://doi.org/10.3929/ethz-b-000583087, Volume 12(S 23), Issue 11988, [BibTeX][Abstract][Paper]
  
  
• H. Klippel, P. Samuel, M. Kuffa, K. Wegener, Automated Evaluation of Continuous and Segmented Chip Geometries Based on Image Processing Methods and a Convolutional Neural Network, Journal of Machine Engineering, 2022, Poland, ISBN 2391-8071, ISSN 1895-7595, DOI DOI: https://doi.org/10.36897/jme/156091, Volume 22, [BibTeX][Abstract]
  
  
• V. Ostad Ali Akbari, Y. Mohammadi, M. Kuffa, K. Wegener, Identification of in-process machine tool dynamics using forced vibrations in milling process, International Journal of Mechanical Sciences, 2022, DOI https://doi.org/10.1016/j.ijmecsci.2022.107887, Volume 239, [BibTeX][Abstract][Paper]
  
  
• C. Emanuele, D. Knüttel, Advances in Artificial Intelligence Methods Applications in Industrial Control Systems: Towards Cognitive Self-Optimizing Manufacturing Systems, Special Issue Advances in Artificial Intelligence Methods Applications in Industrial Control Systems, 2022, DOI https://doi.org/10.3390/app122110962, [BibTeX]
  
  
• E. Relea, L. Weiss, K. Wegener, Dimensional stability of mineral cast for precision machinery, Smart, Sustainable Manufacturing in an Ever-Changing World - Springer Nature, 2022, DOI 10.1007/978-3-031-15602-1, [BibTeX]
  
  
• N. Bugdayci, K. Wegener, M. Postel, Monitoring of the Average Cutting Forces from Controller Signals using Artificial Neural Networks, Journal of Machine Engineering, 2022, DOI 10.36897/jme/154801, Volume 22, Issue 4, Pages 6--21, [BibTeX][Abstract]
  
  
• F. Stoop, J. Mayr, C. Sulz, P. Kaftan, F. Bleicher, K. Yamazaki, K. Wegener, Cloud-based thermal error compensation with a federated learning approach, Precision Engineering, 2022, ISSN 0141-6359, DOI https://doi.org/10.1016/j.precisioneng.2022.09.013, Volume 79, Pages 135--145, [BibTeX][Abstract][Paper]
  
  
• A. Staub, L. Brunner, A. Spierings, K. Wegener, A Machine-Learning-Based Approach to Critical Geometrical Feature Identification and Segmentation in Additive Manufacturing, Technologies, 2022, DOI https://doi.org/ 10.3390/technologies10050102, Volume 10, Issue 102, Pages 9, [BibTeX][Abstract][Paper]
  
  
• F. Mauz, R. Wigger, T. Wahl, M. Kuffa, K. Wegener, Acoustic Roughness Measurement of Railway Tracks: Laboratory Investigation of External Disturbances on the Chord-Method with an Optical Measurement Approach, Applied Sciences, 2022, Switzerland, DOI https://doi.org/10.3390/app12157732, Volume 12(15), Issue 7732, [BibTeX][Abstract][Paper]
  
  
• L. Seeholzer, T. Krammer, P. Saeedi, K. Wegener, Analytical model for predicting tool wear in orthogonal machining of unidirectional carbon fibre reinforced polymer (CFRP), The International Journal of Advanced Manufacturing Technology, 2022, [BibTeX]
  
  
• M. Afrasiabi, D. Keller, C. Lüthi, M. Bambach, K. Wegener, Effect of Process Parameters on Melt Pool Geometry in Laser Powder Bed Fusion of Metals: A Numerical Investigation, Procedia CIRP, 2022, [BibTeX]
  
  
• D. Knüttel, S. Baraldo, A. Valente, K. Wegener, E. Carpanzano, Machine learning based track height prediction for complex tool paths in Direct Metal Deposition, CIRP Annals, 2022, [BibTeX][Abstract]
  
  
• N. Zimmermann, T. Büchi,, J. Mayr, K. Wegener, Self-optimizing thermal error compensation models with adaptive inputs using Group-LASSO for ARX-models, Journal of Manufacturing Systems, 2022, DOI https://doi.org/10.1016/j.jmsy.2022.04.015, Volume 64, Pages 615--625, [BibTeX][Abstract]
  
  
• Y. Rothacher, A. Nguyen Thi, E. Efthymiou, E. Werth, C. Baumann, B. Lenggenhager, P. Brugger, A. Kunz, L. Imbach, Dissociation of motor control from motor awareness in awake sleepwalkers: An EEG study in virtual reality, CORTEX, 2022, DOI 10.1016/j.cortex.2021.12.016, Volume 149, Pages 165--172, [BibTeX][Abstract][Paper]
  
  
• J. Weixler, Z. Marc, K. Wegener, 300 fs pulsed laser ablation of Al2O3 ceramic and introduction of a predictive model, Materials & Design, 2022, Netherlands, DOI https://doi.org/10.1063/1.5092812, Volume 217, Issue 110614, [BibTeX][Paper]
  
  
• F. Soffel, K. Papis, M. Bambach, K. Wegener, Laser Preheating for Hot Crack Reduction in Direct Metal Deposition of Inconel 738LC, Metals, 2022, Basel, Switzerland, DOI 10.3390/met12040614, [BibTeX][Abstract]
  
  
• A. Zschippang, S. Weikert, K. Wegener, Face-gear drive: Simulation of shaping as manufacturing process of face-gears, Mechanism and Machine Theory, 2022, ISSN 0094-114X, DOI https://doi.org/10.1016/j.mechmachtheory.2022.104791, Volume 172, Pages 104791, [BibTeX]
  
  
• H. Klippel, E. González Sánchez, I. Margolis, M. Röthlin, M. Afrasiabi, M. Kuffa, K. Wegener, Cutting force prediction of Ti6Al4V using a machine learning model of SPH orthogonal cutting process simulations, Journal of Machine Engineering, 2022, Poland, ISBN 2391-8071, ISSN 1895-7595, DOI https://doi.org/10.36897/jme/147201, Volume 22, Issue 1, Pages 111-123, [BibTeX][Abstract]
  
  
• M. Buhmann, C. Erich, E. Christian, F. Klaus, Point cloud based tool path generation for corrective machining in ultra-precision diamond turning, The International Journal of Advanced Manufacturing Technology, 2022, [BibTeX][Abstract]
  
  
• V. Ostad Ali Akbari, M. Postel, M. Kuffa, K. Wegener, Improving stability predictions in milling by incorporation of toolholder sound emissions, CIRP Journal of Manufacturing Science and Technology, 2022, Volume 37, Pages 359-369, [BibTeX][Abstract][Paper]
  
  
• A. Speidel, L. Gargalis, J. Ye, M. Matthews, A. Spierings, R. Hague, A. Clare, J. Murray, Chemical recovery of spent copper powder in laser powder bed fusion, Additive manufacturing, 2022, DOI https://doi.org/10.1016/j.addma.2022.102711, [BibTeX][Abstract][Paper]
  
  
• F. Mauz, R. Wigger, T. Wahl, M. Kuffa, K. Wegener, Acoustic roughness measurement of railway tracks: implementation of an optical measurement approach & possible improvements to the standard, Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2022, ISSN 2041-3017, DOI http://dx.doi.org/10.1177/09544097221086487, [BibTeX][Abstract][Paper]
  
  
• A. Zschippang, S. Weikert, K. Wegener, Face-gear drive: Meshing efficiency assessment, Mechanism and Machine Theory, 2022, ISSN 0094-114X, DOI https://doi.org/10.1016/j.mechmachtheory.2022.104765, Volume 171, Pages 104765, [BibTeX]
  
  
• T. Gittler, L. Plümke, F. Silani, P. Moro, L. Weiss, K. Wegener, People, Process, Master Data, Technology: Data-centric Engineering of Manufacturing Management Systems, Springer Nature - Lecture Notes in Production Engineering, 2022, Stellenbosch, South Africa, [BibTeX][Abstract]
  
  
• F. Soffel, Y. Lin, D. Keller, S. Egorov, K. Wegener, Laser Remelting Process Simulation and Optimization for Additive Manufacturing of Nickel-Based Super Alloys, Materials, 2021, Basel, Switzerland, DOI 10.3390/ma15010177, [BibTeX][Abstract]
  
  
• M. Maier, H. Kunstmann, R. Zwicker, A. Rupenyan, K. Wegener, Autonomous and data-efficient optimization of turning processes using expert knowledge and transfer of knowledge, Journal of Materials Processing Technology, 2021, [BibTeX]
  
  
• M. Spurek, L. Haferkamp, C. Weiss, A. Spierings, J. Schleifenbaum, K. Wegener, Influence of the particle size distribution of monomodal 316L powder on its flowability and processability in powder bed fusion, Progress in Additive Manufacturing, 2021, DOI 10.1007/s40964-021-00240-z, [BibTeX]
  
  
• K. Wegener, S. Weikert, J. Mayr, M. Maier, V. Ostad Ali Akbari, M. Postel, Operator integrated–concept for manufacturing intelligence, Journal of Machine Engineering, 2021, Volume 21, [BibTeX][Abstract]
  
  
• M. Dalaee, C. Eduardo, I. Dey, L. Christian, K. Wegener, Parameters Development for Optimum Deposition Rate in Laser DMD of Stainless Steel EN X3CrNiMo13-4, Lasers in Manufacturing and Materials Processing, 2021, DOI 10.1007/s40516-021-00161-3, [BibTeX]
  
  
• F. Sillani, G. de, M. Schmid, K. Wegener, Influence of packing density and fillers on thermal conductivity of polymer powders for additive manufacturing, International Journal of Advanced Manufacturing Technology, 2021, DOI 10.1007/s00170-021-07117-z, [BibTeX]
  
  
• A. Speidel, L. Gargalis, J. Ye, M. Matthews, A. Spierings, R. Hague, A. Clare, J. Murray, Chemical recovery of spent copper powder in laser powder bed fusion, Additive Manufacturing, 2021, USA, [BibTeX][Abstract]
  
  
• F. Verga, M. Makowska, G. Cellerai, K. Florio, M. Schmid, K. Wegener, M. Gull, Crack-healing, a Novel Approach for a Laser-based Powder Bed Fusion of High-performance Ceramic Oxides, Additive Manufacturing Letters, 2021, DOI https://doi.org/10.1016/j.addlet.2021.100021, [BibTeX][Abstract][Paper]
  
  
• N. Zimmermann, B. Mario, J. Mayr, K. Wegener, Autonomously triggered model updates for self-learning thermal error compensation, CIRP Annals, 2021, DOI https://doi.org/10.1016/j.cirp.2021.04.029, Volume 70, Issue 1, Pages 431-434, [BibTeX]
  
  
• R. Weber, A. Spierings, K. Wegener, S. Seydel, A. Bergamini, D. Van, Integration of piezoelectric stacks in components using powder bed fusion, Smart Materials and Structures, 2021, DOI https://doi.org/10.1088/1361-665X/ac352f, [BibTeX][Abstract]
  
  
• D. Photiou, S. Avraam, F. Sillani, F. Verga, O. Jay, L. Papadakis, Experimental and numerical analysis of 3d printed polymer tetra-petal auxetic structures under compression, Applied Sciences (Switzerland), 2021, DOI https://doi.org/10.3390/app112110362, [BibTeX]
  
  
• M. Afrasiabi, J. Saelzer, S. Berger, I. Iovkov, H. Klippel, M. Röthlin, A. Zabel, D. Biermann, K. Wegener, A Numerical-Experimental Study on Orthogonal Cutting of AISI 1045 Steel and Ti6Al4V Alloy: SPH and FEM Modeling with Newly Identified Friction Coefficients, Metals, 2021, ISSN 2075-4701, DOI 10.3390/met11111683, Volume 11, Pages 1--26, [BibTeX][Abstract]
  
  
• M. Spurek, H. Viet, A. Spierings, M. Lany, G. Santi, B. Revaz, K. Wegener, Relative Density Measurement of PBF-Manufactured 316L and AlSi10Mg Samples via Eddy Current Testing, Metals, 2021, DOI https://doi.org/10.3390/met11091376, [BibTeX]
  
  
• M. Afrasiabi, H. Klippel, M. Röthlin, K. Wegener, An improved thermal model for SPH metal cutting simulations on GPU, Applied Mathematical Modelling, 2021, ISSN 0307-904X, DOI 10.1016/j.apm.2021.08.010, [BibTeX][Abstract]
  
  
• Y. Bharat, M. Bhargavi, C. Carolyn, O. Babatunde, M. Kyle, H. Buck, Z. Jason, F. Sillani, M. Eric, C. Pedro, Mechanical and fatigue performance of pressurized vessels fabricated with Multi Jet Fusion™ for automotive applications, Additive Manufacturing, 2021, DOI https://doi.org/10.3929/ethz-b-000489824, [BibTeX]
  
  
• F. Sillani, K. Wegener, M. Schmid, M. Spurek, L. Haferkamp, A. Spierings, Compaction behavior of powder bed fusion feedstock for metal and polymer additive manufacturing, Rapid Prototyping Journal, 2021, DOI 10.1108/RPJ-01-2021-0010, [BibTeX]
  
  
• S. Fabbro, L. Marra, M. Kuffa, K. Wegener, K. Jens, E. Jona, Abrasive and adhesive wear behaviour of metallic bonds in a synthetic slurry test for wear prediction in reinforced concrete, Wear, 2021, ISSN 0043-1648, DOI https://doi.org/10.1016/j.wear.2021.203690, Volume 476, [BibTeX][Abstract][Paper]
  
  
• T. Gittler, M. Glasder, E. Öztürk, M. Lüthi, L. Weiss, K. Wegener, Milling tool wear prediction using unsupervised machine learning, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07281-2, Volume 117, Issue 7, Pages 2213--2226, [BibTeX][Abstract]
  
  
• V. Gorobets, V. Holzwarth, C. Hirt, N. Jufer, A. Kunz, A VR-based Approach in Conducting MTM for Manual Workplaces, The International Journal of Advanced Manufacturing Technology, 2021, Moscow, Russian Federation, ISSN 0268-3768, DOI 10.1007/s00170-021-07260-7, Pages 2501--2510, [BibTeX][Abstract][Paper]
  
  
• U. Pala, S. Süßmaier, K. Wegener, Grain flash temperatures in diamond wire sawing of silicon, The International Journal of Advanced Manufacturing Technology, 2021, ISSN 1433-3015, DOI 10.1007/s00170-021-07298-7, Volume 117, Issue 7-8, Pages 2227-2236, [BibTeX][Abstract][Paper]
  
  
• L. Seeholzer, S. Süßmaier, F. Kneubühler, K. Wegener, Experimental investigation of the machining characteristics in diamond wire sawing of unidirectional CFRP, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07146-8, Issue 117, Pages 2197-2212, [BibTeX][Abstract]
  
  
• L. Seeholzer, F. Kneubühler, F. Grossenbacher, K. Wegener, Tool wear and spring back analysis in orthogonal machining unidirectional CFRP with respect to tool geometry and fibre orientation, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07222-z, Issue 115, Pages 2905--2928, [BibTeX][Abstract]
  
  
• H. Klippel, S. Süßmaier, M. Röthlin, M. Afrasiabi, P. Uygar, K. Wegener, Simulation of the ductile machining mode of silicon, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07167-3, [BibTeX][Abstract][Paper]
  
  
• M. Gerstgrasser, M. Cloots, J. Stirnimann, K. Wegener, Residual stress reduction of LPBF-processed CM247LC samples via multi laser beam strategies, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07083-6, [BibTeX][Abstract]
  
  
• P. Borges Esteves, W. Moritz, V. João, S. Maria, K. Wegener, WEDM single crater asymmetry, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07023-4, [BibTeX][Abstract][Paper]
  
  
• E. Relea, B. Pfyffer, L. Weiss, K. Wegener, Experimental Comparative Investigation on Creep Behavior of Mineral Cast, Ultra-High-Performance Concrete, and Natural Stone for Precision Machinery Structures, International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-07118-y, [BibTeX]
  
  
• V. Holzwarth, J. Schneider, J. Handali, J. Gisler, C. Hirt, A. Kunz, J. vomBrocke, Towards estimating affective states in Virtual Reality based on behavioral data, Springer Virtual Reality - Special Issue "Virtual Reality and Cognitive Sciences", 2021, DOI 10.1007/s10055-021-00518-1, Volume 25, Issue 4, Pages 1139--1152, [BibTeX][Abstract][Paper]
  
  
• A. Spierings, K. Kern, Y. Steimer, F. Palm, K. Wegener, Assessment of Stress Corrosion Cracking Behavior of Additively Processed Al-Mg-Sc-Zr Alloy, SVOA Materials Science & Technology, 2021, London, United Kingdom, ISSN 2634-5331, Volume 3, Issue 2, Pages 24--35, [BibTeX][Abstract][Paper]
  
  
• M. Afrasiabi, C. Lüthi, M. Bambach, K. Wegener, Multi-Resolution SPH Simulation of a Laser Powder Bed Fusion Additive Manufacturing Process, Applied Sciences, 2021, ISSN 2076-3417, DOI https://doi.org/10.3390/app11072962, Volume 11, Issue 7, Pages 1--20, [BibTeX][Abstract][Paper][Video]
  
  
• F. Soffel, D. Eisenbarth, K. Wegener, Effect of clad height, substrate thickness and scanning pattern on cantilever distortion in direct metal deposition, The International Journal of Advanced Manufacturing Technology, 2021, DOI 10.1007/s00170-021-06925-7, [BibTeX]
  
  
• L. Haferkamp, A. Spierings, K. Wegener, L. Haudenschild,, K. Riener,, S. Ziegelmeier,, G. Leichtfried,, The Influence of Particle Shape, Powder Flowability, and Powder Layer Density on Part Density in Laser Powder Bed Fusion, Metals, 2021, DOI https://doi.org/10.3390/met11030418, [BibTeX][Abstract][Paper]
  
  
• K. Wegener, A. Spierings, R. Teti, A. Caggiano, D. Knüttel, A. Staub, A conceptual vision for a bio-intelligent manufacturing cell for Selective Laser Melting, CIRP Journal of Manufacturing Science and Technology, 2021, DOI https://doi.org/10.1016/j.cirpj.2020.11.009, [BibTeX]
  
  
• V. Ostad Ali Akbari, K. Ahmadi, Substructure analysis of vibration-assisted drilling systems, The International Journal of Advanced Manufacturing Technology, 2021, DOI https://doi.org/10.1007/s00170-021-06777-1, Volume 113, Issue 9, Pages 2833-2848, [BibTeX][Abstract][Paper]
  
  
• P. Hernández, J. Purtschert, J. Konvicka, C. Buesser, D. Schranz, J. Mayr, K. Wegener, Reduced-Order Model of the Environmental Variation Error of a Precision Five-Axis Machine Tool, ASME Journal of Manufacturing Science and Engineering, 2021, DOI https://doi.org/10.1115/1.4047739, [BibTeX]
  
  
• P. Hernández, D. Spescha, K. Wegener, Model order reduction of thermo-mechanical models with parametric convective boundary conditions: focus on machine tools, Comput Mechanics, 2021, DOI https://doi.org/10.1007/s00466-020-01926-x, [BibTeX]
  
  
• M. Afrasiabi, H. Klippel, M. Röthlin, K. Wegener, Smoothed Particle Hydrodynamics Simulation of Orthogonal Cutting with Enhanced Thermal Modeling, Applied Sciences, 2021, ISSN 2076-3417, DOI 10.3390/app11031020, Volume 11, Issue 3, [BibTeX][Abstract][Paper]
  
  
• M. Gerstgrasser, D. Smolenicki, M. Akbari, H. Klippel, H. Roelofs, E. Cadoni, K. Wegener, Analysis of two parameter identification methods for original and modified Johnson-Cook fracture strains, including numerical comparison and validation of a new blue-brittle dependent fracture model for free-cutting Steel 50SiB8, Theoretical and Applied Fracture Mechanics, 2021, DOI https://doi.org/10.1016/j.tafmec.2021.102905, [BibTeX][Abstract]
  
  
• F. Soffel, D. Eisenbarth, E. Hosseini, K. Wegener, Interface strength and mechanical properties of Inconel 718 processed sequentially by casting, milling, and direct metal deposition, Journal of Materials Processing Technology, 2020, DOI 10.1016/j.jmatprotec.2020.117021, [BibTeX]
  
  
• M. Gerstgrasser, R. Jakob, S. Pandya, J. Stirnimann, K. Wegener, CA single track microstructure simulation of nickel base alloy CM247LC and stainless steel S316L, including experimental validation of S316L, Materials & Design, 2020, DOI https://doi.org/10.1016/j.matdes.2020.109395, [BibTeX][Abstract]
  
  
• M. Gerstgrasser, M. Cloots, J. Stirnimann, K. Wegener, Focus shift analysis, to manufacture dense and crack-free SLM-processed CM247LC samples, Journal of Materials Processing Technology, 2020, DOI 10.1016/j.jmatprotec.2020.116948, [BibTeX][Abstract]
  
  
• N. Ackerl, M. Putzer, K. Wegener, Geometry assessment of ultra-short pulsed laser drilled micro-holes, The International Journal of Advanced Manufacturing Technology, 2020, London, [BibTeX][Abstract][Paper]
  
  
• T. Gittler, S. Stephan, A. Rupenyan, K. Wegener, Machine Tool Component Health Identification with Unsupervised Learning, Journal of Manufacturing and Materials Processing - Special Issue "AI Applications in Smart and Advanced Manufacturing", 2020, Basel, Switzerland, ISSN 2504-4494, DOI https://doi.org/10.3390/jmmp4030086, Volume 4, Issue 3, Pages 86, [BibTeX][Abstract][Paper]
  
  
• F. Veenstra, N. Ackerl, A. Martin, J. Perez-Ramirez, Laser-Microstructured Copper Reveals Selectivity Patterns in the Electrocatalytic Reduction of CO2, Chem, 2020, ISSN 2451-9294, DOI 10.1016/j.chempr.2020.04.001, Volume 6, Pages 1 -- 16, [BibTeX][Abstract]
  
  
• T. Semm, D. Spescha, N. Ceresa, M. Zäh, K. Wegener, Efficient Dynamic Machine Tool Simulation with Included Damping and Linearized Friction Effects, Procedia CIRP, 2020, DOI https://doi.org/10.1016/j.procir.2020.02.141, Issue 93, Pages 1442--1447, [BibTeX]
  
  
• N. Ackerl, P. Gugger, K. Wegener, Laser marking and coloration of Ti-6Al-4V with ultrashort pulses, Journal of Laser Application, 2020, USA, ISSN 1938-1387, DOI 10.2351/7.0000021, Volume 32, Issue 3, Pages 032013, [BibTeX][Abstract]
  
  
• M. Afrasiabi, K. Wegener, 3D Thermal Simulation of a Laser Drilling Process with Meshfree Methods, Journal of Manufacturing and Materials Processing, 2020, Basel, Switzerland, DOI 10.3390/jmmp4020058, Volume 4, Issue 2, Pages 58--77, [BibTeX][Abstract]
  
  
• S. Pfeiffer, M. Makowska, K. Florio, D. Sanchez, F. Marone, X. Zhang, G. Aneziris, S. Van, K. Wegener, T. Graule, Selective laser melting of thermal pre-treated metal oxide doped aluminum oxide granules, Open Ceramics, 2020, [BibTeX]
  
  
• C. Hirt, M. Spahni, Y. Kompis, D. Jetter, A. Kunz, Virtual Reality Training Platform for a Computer Numerically Controlled Grinding Machine Tool, International Journal of Mechatronics and Manufacturing Systems, 2020, ISSN 1753-1039, DOI 10.1504/IJMMS.2021.115460, Volume 14, Issue 1, Pages 1--17, [BibTeX][Abstract][Paper]
  
  
• D. Eisenbarth, P. Stoll, C. Klahn, T. Heinis, M. Meboldt, K. Wegener, Unique coding for authentication and anti-counterfeiting by controlled and random process variation in L-PBF and L-DED, Additive Manufacturing, 2020, DOI https://doi.org/10.1016/j.addma.2020.101298, Volume Volume 35, Pages 101298, [BibTeX]
  
  
• H. Büttner, K. Michael, J. Gysel, P. Gugger, S. Seraina, B. de, J. Stirnimann, K. Wegener, Innovative micro-tool manufacturing using ultra-short pulse laser ablation, Journal of Materials Processing Technology, 2020, [BibTeX][Paper]
  
  
• N. Zimmermann, S. Lang, P. Blaser, J. Mayr, Adaptive input selection for thermal error compensation models, CIRP Annals, 2020, DOI https://doi.org/10.1016/j.cirp.2020.03.017, Volume 69, Issue 1, Pages 485 -- 488, [BibTeX][Abstract]
  
  
• M. Maier, A. Rupenyan, B. Christian, K. Wegener, Self-optimizing grinding machines using Gaussian process models and constrained Bayesian optimization, The International Journal of Advanced Manufacturing Technology, 2020, DOI 10.1007/s00170-020-05369-9, Pages 539-552, [BibTeX][Abstract]
  
  
• M. Buhmann, R. Roth, T. Liebrich, K. Frick, E. Carelli, M. Marxer, New positioning procedure for optical probes integrated on ultra-precision diamond turning machines, CIRP Annals, 2020, DOI https://doi.org/10.1016/j.cirp.2020.04.062, [BibTeX][Abstract]
  
  
• N. Ackerl, P. Gugger, M. Warhanek, J. Gysel, K. Wegener, Ultra-short Pulsed Laser Marking and Coloration of Metals with Segmented Pixel Parameter Transformation, Journal of Laser Micro/Nanoengineering, 2020, ISSN 1880-0688, DOI 10.2961/jlmn.2020.01.2001, Volume 15, Issue 1, Pages 1-6, [BibTeX][Abstract]
  
  
• N. Ackerl, K. Wegener, Observation of single ultrashort laser pulse generated periodic surface structures on linelike defects, Journal of Laser Application, 2020, USA, ISSN 1938-1387, DOI 10.2351/7.0000075, Volume 32, Issue 2, Pages 022049, [BibTeX][Abstract]
  
  
• M. Postel, N. Bugdayci, K. Wegener, Ensemble transfer learning for refining stability predictions in milling using experimental stability states, The International Journal of Advanced Manufacturing Technology, 2020, DOI 10.1007/s00170-020-05322-w, Volume 107, Pages 4123-4139, [BibTeX][Abstract]
  
  
• L. Haferkamp, A. Spierings, M. Rusch,, D. Jermann,, M. Spurek, K. Wegener, Effect of Particle size of monomodal 316L powder on powder layer density in powder bed fusion, Progress in Additive Manufacturing, 2020, DOI https://doi.org/10.1007/s40964-020-00152-4, [BibTeX][Abstract]
  
  
• A. Zschippang, N. Lanz, K. Küçük, S. Weikert, K. Wegener, Face-gear drive: Assessment of load sharing, transmission characteristics and root stress based on a quasi-static analysis, Mechanism and Machine Theory, 2020, ISSN 0094-114X, DOI https://doi.org/10.1016/j.mechmachtheory.2020.103914, Volume 151, [BibTeX][Abstract]
  
  
• M. Postel, N. Bugdayci, N. Lanz, F. Kuster, K. Wegener, Neural network supported inverse parameter identification for stability predictions in milling, CIRP Journal of Manufacturing Science and Technology, 2020, Volume 29/A, Pages 71-87, [BibTeX]
  
  
• N. Zimmermann, S. Ibaraki, Self-calibration of rotary axis and linear axes error motions by an automated on-machine probing test cycle, The International Journal of Advanced Manufacturing Technology, 2020, DOI https://doi.org/10.1007/s00170-020-05105-3, Volume 107, Issue 5-6, Pages 2107-2120, [BibTeX]
  
  
• N. Ackerl, G. Fisch, J. Auerswald, K. Wegener, Evolution of microstructures on stainless steel induced by ultra-short pulsed laser ablation, SN Applied Sciences, 2020, Switzerland, DOI 10.1007/s42452-020-2447-3, Volume 2, Issue 652, [BibTeX][Abstract]
  
  
• C. Hirt, M. Eckard, A. Kunz, Stress Generation and Non-intrusive Measurement in Virtual Environments Using Eye Tracking, Journal of Ambient Intelligence and Humanized Computing, 2020, Germany, ISSN 18685137, DOI 10.1007/s12652-020-01845-y, Pages 5977 -- 5989, [BibTeX][Abstract][Paper]
  
  
• E. Relea, V. Urundolil, C. Sánchez, C. Gschnitzer-Bärnthaler, M. Zogg, L. Weiss, K. Wegener, Utilization of CFRP in High-Speed Stamping Presses and its Gigacycle Fatigue Testing at Resonance Frequency, International Journal of Automation Technology, 2020, Japan, DOI https://doi.org/10.20965/ijat.2020.p0311, [BibTeX]
  
  
• M. Afrasiabi, L. Meier, M. Röthlin, H. Klippel, K. Wegener, GPU-accelerated meshfree simulations for parameter identification of a friction model in metal machining, International Journal of Mechanical Sciences, 2020, ISSN 0020-7403, DOI https://doi.org/10.1016/j.ijmecsci.2020.105571, Volume 176, [BibTeX][Abstract]
  
  
• Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Walking through virtual mazes: Spontaneous alternation behaviour in human adults, Cortex, 2020, DOI 10.1016/j.cortex.2020.01.018, Pages 1--16, [BibTeX][Abstract][Paper]
  
  
• N. Ackerl, M. Warhanek, J. Gysel, K. Wegener, Ultra-short pulsed laser conditioning of metallic-bonded diamond grinding tools, Materials & Design, 2020, DOI 10.1016/j.matdes.2020.108530, Volume 189, Issue 108530, [BibTeX]
  
  
• F. Verga, M. Borlaf, L. Conti, K. Florio, M. Vetterli, T. Graule, M. Schmid, K. Wegener, Laser-based powder bed fusion of alumina toughened zirconia, Additive Manufacturing, 2020, [BibTeX]
  
  
• M. Dalaee, F. Cheaitani, A. Arabi-Hashemi, C. Rohrer, B. Weisse, C. Leinenbach, K. Wegener, Feasibility study in combined direct metal deposition (DMD) and plasma transfer arc welding (PTA) additive manufacturing, The International Journal of Advanced Manufacturing Technology, 2020, DOI https://doi.org/10.1007/s00170-019-04917-2, [BibTeX]
  
  
• U. Pala, F. Kuster, K. Wegener, Characterization of Electroplated Diamond Wires and the Resulting Workpiece Quality in Silicon Sawing, Journal of Materials Processing Technology, 2020, DOI 10.1016/j.jmatprotec.2019.116390, Volume 276, Pages 116930, [BibTeX]
  
  
• M. Dalaee, L. Gloor, C. Leinenbach, K. Wegener, Experimental and numerical study of the influence of induction heating process on build rates Induction Heating-assisted laser Direct Metal Deposition (IH-DMD), Surface and Coatings Technology, 2019, DOI https://doi.org/10.1016/j.surfcoat.2019.125275, [BibTeX]
  
  
• M. Maier, T. Gittler, L. Weiss, C. Bobst, S. Scholze, K. Wegener, Sensors as an Enabler for Self-Optimizing Grinding Machines, MM Science Journal, 2019, ISSN 1803-1269, DOI 10.17973/MMSJ.2019_11_2019070, [BibTeX][Abstract][Paper]
  
  
• M. Maier, Z. Ruben, M. Akbari, A. Rupenyan, K. Wegener, Bayesian optimization for autonomous process set-up in turning, CIRP Journal of Manufacturing Science and Technology, 2019, DOI https://doi.org/10.1016/j.cirpj.2019.04.005, [BibTeX][Abstract]
  
  
• F. Stoop, G. Ely, R. Menna, G. Charache, T. Gittler, K. Wegener, Smart factory equipment integration through standardised OPC UA communication with companion specifications and equipment specific information models, International Journal Mechatronics and Manufacturing Systems, 2019, DOI https://doi.org/10.1504/ijmms.2019.103499, Volume 12, Issue 3/4, Pages 344--364, [BibTeX][Abstract][Paper]
  
  
• H. Büttner, M. Hajri, J. Stirnimann, M. Voegtlin, K. Wegener, A comparison between micro milling pure copper and tungsten reinforced copper for electrodes in EDM applications, Precision Engineering, 2019, DOI 10.1016/j.precisioneng.2019.08.018, Volume 60, Pages 326--339, [BibTeX][Abstract][Paper]
  
  
• L. Meier, Modeling tool wear in titanium cutting with an in-process tribometer, Industrial Lubrication and Tribology, 2019, ISSN 0036-8792, DOI https://doi.org/10.1108/ilt-08-2019-0311, [BibTeX][Abstract]
  
  
• C. Baumgart, K. Wegener, Investigation of the coolant fluid flow distribution in the grinding gap, Modern Machinery Science Journal, 2019, Czech Republic, DOI 10.17973/MMSJ.2019_11_2019099, [BibTeX]
  
  
• L. Seeholzer, D. Scheuner, K. Wegener, Analytical force model for drilling out unidirectional Carbon Fibre Reinforced Polymers (CFRP), Journal of Materials Processing Technology, 2019, DOI https://doi.org/10.1016/j.jmatprotec.2019.116489, Volume 278, [BibTeX][Abstract]
  
  
• P. Blaser, J. Mayr, K. Wegener, Long-Term Thermal Compensation of 5-Axis Machine Tools Due To Thermal Adaptive Learning Control, MM Science Journal, 2019, DOI 10.17973/MMSJ.2019 11 2019066, [BibTeX]
  
  
• M. Röthlin, H. Klippel, M. Afrasiabi, K. Wegener, Meshless single grain cutting simulations on the GPU, International Journal of Mechatronics and Manufacturing Systems, 2019, ISSN 1753-1047, DOI https://doi.org/10.1504/IJMMS.2019.103488, Issue 12.3-4 (2019), Pages 272-297, [BibTeX][Abstract]
  
  
• M. Makowska, S. Pfeiffer, N. Casati, K. Florio, M. Vetterli, K. Wegener, T. Graule, H. van_Swygenhoven, Pre-processing of hematite-doped alumina granules for Selective Laser Melting, Ceramics International, 2019, DOI 10.1016/j.ceramint.2019.05.251, Volume 45, Issue 14, Pages 17014--17022, [BibTeX][Abstract]
  
  
• N. Ackerl, K. Wegener, Ablation Characteristics of Alumina and Zirconia Ceramics on Ultra-short Pulsed Laser Machining, Journal of Laser Micro/Nanoengineering, 2019, Japan, ISSN 1880-0688, DOI https://doi.org/10.2961/jlmn.2019.02.0009, Volume 14, Issue 2, Pages 5, [BibTeX][Abstract]
  
  
• M. Afrasiabi, M. Röthlin, K. Wegener, Contemporary Meshfree Methods for Three Dimensional Heat Conduction Problems, Arch of Computational Methods in Engineering, 2019, ISSN 1134-3060, DOI https://doi.org/10.1007/s11831-019-09355-7, Pages 1--35, [BibTeX][Abstract]
  
  
• A. Zschippang, S. Weikert, K. Küçük, K. Wegener, Face-gear drive: Geometry generation and tooth contact analysis, Mechanism and Machine Theory, 2019, ISSN 0094-114X, DOI 10.1016/j.mechmachtheory.2019.103576, Volume 142, [BibTeX][Abstract]
  
  
• L. Meier, Methods to reduce variation in cutting tool life tests, The International Journal of Advanced Manufacturing Technology, 2019, DOI https://doi.org/10.1007/s00170-019-03558-9, Volume 103, Issue 1-4, Pages 355 -- 365, [BibTeX][Abstract]
  
  
• M. Afrasiabi, M. Röthlin, H. Klippel, K. Wegener, Meshfree simulation of metal cutting: an updated Lagrangian approach with dynamic refinement, International Journal of Mechanical Sciences, 2019, ISSN 0020-7403, DOI 10.1016/j.ijmecsci.2019.06.045, Issue 160C, Pages 451--466, [BibTeX][Abstract]
  
  
• B. Paul, H. Melik, W. Tobias, J. Weixler, K. Wegener, Picosecond pulsed laser ablation of dielectric rods: Angle-dependent ablation process model for laser micromachining, Journal of Applied Physics, 2019, USA, [BibTeX][Abstract]
  
  
• R. Lorenz, T. Netland, P. Roh, V. Holzwarth, A. Kunz, K. Wegener, Data-driven productivity improvement in machinery supply chains, International Journal of Mechatronics and Manufacturing Systems, 2019, DOI 10.1504/IJMMS.2019.103483, Volume 12, Issue 3/4, Pages 255--271, [BibTeX][Abstract][Paper]
  
  
• L. Seeholzer, R. Voss, L. Marchetti, K. Wegener, Experimental study: comparison of conventional and low-frequency vibration-assisted drilling (LF-VAD) of CFRP/aluminium stacks, The International Journal of Advanced Manufacturing Technology, 2019, DOI https://doi.org/10.1007/s00170-019-03837-5, Issue 104, Pages 433-449, [BibTeX][Abstract]
  
  
• M. Postel, D. Aslan, K. Wegener, Y. Altintas, Monitoring of vibrations and cutting forces with spindle mounted vibration sensors, CIRP Annals, 2019, Volume 68, Issue 1, Pages 413--416, [BibTeX][Abstract]
  
  
• F. Sillani, K. Wegener, M. Schmid, R. Kleijnen, Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance, Additive Manufacturing, 2019, DOI 10.1016/j.addma.2019.02.004, [BibTeX]
  
  
• M. Akbari, D. Smolenicki, H. Roelofs, K. Wegener, Inverse material modelling and optimization of free-cutting steel with graphite inclusions, The International Journal of Advanced Manufacturing Technology, 2019, ISSN 0268-3768, DOI 10.1007/s00170-018-3036-0, Volume 101, Issue 5–8, Pages 1997–2014, [BibTeX][Abstract]
  
  
• M. Klyuev, K. Florio, M. Akbari, K. Wegener, Influence of energy fraction in EDM drilling of Inconel 718 by statistical analysis and finite element crater-modelling, Journal of Manufacturing Processes, 2019, DOI https://doi.org/10.1016/j.jmapro.2019.03.002, Volume 40, Pages 84-93, [BibTeX][Abstract]
  
  
• P. Roh, A. Kunz, K. Wegener, Information Stream Mapping: Mapping, analysing and improving the efficiency of information streams in manufacturing value streams, CIRP Journal of Manufacturing Science and Technology, 2019, Paris, France, ISSN 1755-5817, DOI https://doi.org/10.1016/j.cirpj.2019.04.004, Volume 25, Pages 1--13, [BibTeX][Abstract][Paper]
  
  
• N. Ackerl, P. Börner, K. Wegener, Toward application of hierarchical structures by ultrashort pulsed laser ablation, Journal of Laser Applications, 2019, USA, ISSN 1938-1387, DOI https://doi.org/10.2351/1.5096079, Volume 31, Issue 022501, [BibTeX][Abstract]
  
  
• N. Ackerl, M. Warhanek, J. Gysel, K. Wegener, Path calculation of 7-axes synchronous quasi-tangential laser manufacturing, The International Journal of Advanced Manufacturing Technology, 2019, London, ISSN 1433-3015, DOI https://doi.org/10.1007/s00170-019-03540-5, [BibTeX][Abstract]
  
  
• D. Eisenbarth, P. Borges, F. Wirth, K. Wegener, Spatial powder flow measurement and efficiency prediction for laser direct metal deposition, Surface and Coatings Technology, 2019, [BibTeX]
  
  
• P. Stoll, A. Spierings, K. Wegener, Impact of a process interruption on tensile properties of SS 316L parts and hybrid parts produced with selective laser melting, The International Journal of Advanced Manufacturing Technology, 2019, DOI https://doi.org/10.1007/s00170-019-03560-1, Volume 103, Issue 1-4, Pages 367--376, [BibTeX]
  
  
• S. Pfeiffer, K. Florio, M. Makowska, S. Ferreira, H. Van_Swygenhoven, G. Aneziris, K. Wegener, T. Graule, Iron Oxide Doped Spray Dried Aluminum Oxide Granules for Selective Laser Sintering and Melting of Ceramic Parts, Advanced Engineering Materials, 2019, Issue 1801352, [BibTeX]
  
  
• K. Florio, S. Pfeiffer, M. Makowska, F. Verga, N. Casati, S. Van, T. Graule, K. Wegener, An Innovative Selective Laser Melting Process for Hematite-Doped Aluminum Oxide, Advanced Engineering Materials, 2019, Issue 1801352, [BibTeX]
  
  
• F. Macedo,, M. Wiessner, C. Hollenstein,, C. Martendal,, F. Kuster,, K. Wegener,, Anode Power Deposition in Dry EDM, International Journal of Precision Engineering and Manufacturing-Green Technology, 2019, DOI https://doi.org/10.1007/s40684-019-00051-2, [BibTeX]
  
  
• M. Röthlin, H. Klippel, M. Afrasiabi, K. Wegener, Metal cutting simulations using smoothed particle hydrodynamics on the GPU, Journal of Advanced Manufacturing Technology, 2019, Springer London, ISSN 0268-3768, DOI https://doi.org/10.1007/s00170-019-03410-0, Pages 1--13, [BibTeX][Abstract]
  
  
• M. Siegrist, C. Ung, M. Zank, M. Marinello, A. Kunz, C. Hartmann, M. Menozzi, Consumers' food selection behaviors in three-dimensional (3D) virtual reality, Food Research International, 2019, DOI 10.1016/j.foodres.2018.02.033, Volume 117, Pages 50--59, [BibTeX][Abstract][Paper][Video]
  
  
• M. Postel, N. Candia, N. Bugdayci, F. Kuster, K. Wegener, Development and application of an automated impulse hammer for improved analysis of five-axis CNC machine dynamics and enhanced stability chart prediction, International Journal of Mechatronics and Manufacturing Systems, 2019, DOI 10.1504/IJMMS.2019.10025076, Volume 12, Issue 3/4, Pages 318-343, [BibTeX]
  
  
• R. Voss, L. Seeholzer, F. Kuster, K. Wegener, Analytical force model for orthogonal machining of unidirectional carbon fibre reinforced polymers (CFRP) as a function of the fibre orientation, Journal of Materials Processing Technology, 2019, DOI https://doi.org/10.1016/j.jmatprotec.2018.08.001, Volume 263, Pages 440--469, [BibTeX][Abstract]
  
  
• U. Pala, K. Wegener, A Novel Method for the Characterization of Diamond Wire Topography and Abrasive Grain Geometries, MM Science Journal, 2019, DOI 10.17973/mmsj.2019_11_2019076, Volume 4, Pages 3236-3242, [BibTeX]
  
  
• J. Best, X. Mäder, J. Michler, A. Spierings, Mechanical Anisotropy Investigated in the Complex SLM-Processed Sc- and Zr-Modified Al–Mg Alloy Microstructure, Advanced Engineering Materials, 2018, Weinheim, Germany, DOI 10.1002/adem.201801113, Issue 1801113, Pages 6, [BibTeX][Abstract]
  
  
• Y. Rothacher, A. Nguyen Thi, B. Lenggenhager, A. Kunz, P. Brugger, Visual capture of gait during redirected walking, Springer Nature Scientific Reports, 2018, DOI 10.1038/s41598-018-36035-6, Pages 8:17974, [BibTeX][Abstract][Paper]
  
  
• A. Spierings, K. Dawson, P. Dumitraschkewitz, S. Pogatscher, K. Wegener, Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition, Additive Manufacturing, 2018, USA, ISSN 2214-8604, DOI 10.1016/j.addma.2017.12.011, Volume 20, Pages 173--181, [BibTeX][Abstract]
  
  
• K. Ruhm, Metrology and mathematics — Survey on a dual pair, Advanced Mathematical and Computational Tools in Metrology and Testing, 2018, Volume Series on Advances in Mathematics for Applied Sciences, Issue 89, Pages 85--118, [BibTeX][Abstract]
  
  
• N. Ackerl, M. Warhanek, J. Gysel, K. Wegener, Ultra-short Pulsed Laser Machining of Dental Ceramic Implants, Journal of the European Ceramic Society, 2018, DOI https://doi.org/10.1016/j.jeurceramsoc.2018.11.007, [BibTeX][Abstract]
  
  
• N. Zimmermann, P. Hernández, P. Blaser, J. Mayr, Laboratory practice energy efficient production, ETH Learning and Teaching Journal, 2018, ISSN 2624-7992, Volume 1, Issue 1, [BibTeX]
  
  
• R. Knoblauch, D. Boing, W. Weingärtner, K. Wegener, F. Kuster, F. Xavier, Investigation of the progressive wear of individual diamond grains in wire used to cut monocrystalline silicon, Wear, 2018, DOI 10.1016/j.wear.2018.07.025, Volume 414-415, Pages 50--58, [BibTeX][Abstract]
  
  
• A. Staub, A. Spierings, K. Wegener, Correlation of Meltpool Characteristics and Residual Stresses at High Laser Intensity for Metal LPBF Process, Advances in Materials and Processing Technologies, 2018, ISSN 2374-0698, DOI 10.1080/2374068X.2018.1535643, Pages 1--9, [BibTeX][Abstract]
  
  
• D. Eisenbarth, F. Soffel, K. Wegener, Effects of direct metal deposition combined with intermediate and final milling on part distortion, Virtual and Physical Prototyping, 2018, ISSN 1745-2759, DOI 10.1080/17452759.2018.1532799, [BibTeX]
  
  
• H. Dubbe, E. Holl, A. Spierings, K. Wegener, U. Nieken, Development of a spatially uniform low-temperature hydrogen combustor, Journal of Zhejiang University - Science A, 2018, China, ISSN 1862-1775, DOI 10.1631/jzus.A1700620, Volume 19, Issue 10, Pages 735--745, [BibTeX][Abstract]
  
  
• F. Wirth, K. Wegener, Simulation of the multi-component process gas flow for the explanation of oxidation during laser cladding, Additive Manufacturing, 2018, DOI https://doi.org/10.1016/j.addma.2018.10.010, Volume 24, Pages 249-256, [BibTeX][Abstract]
  
  
• M. Akbari, M. Klyuev, J. Boos, K. Wegener, Flash Temperature and Force Measurements in Single Diamond Scratch Tests, The International Journal of Advanced Manufacturing Technology, 2018, ISSN 1433-3015, DOI http://dx.doi.org/10.1007/s00170-018-1930-0, Volume 96, Issue 9–12, Pages 4393–4405, [BibTeX][Abstract]
  
  
• J. Mayr, P. Blaser, A. Ryser, P. Hernández, An adaptive self-learning compensation approach for thermal errors on 5-axis machine tools handling an arbitrary set of sample rates, CIRP Annals, 2018, DOI https://doi.org/10.1016/j.cirp.2018.04.001, Volume 67, Issue 1, Pages 551-554, [BibTeX][Abstract]
  
  
• F. Wirth, K. Wegener, A physical modeling and predictive simulation of the laser cladding process, Additive Manufacturing, 2018, ISSN 2214-8604, DOI https://doi.org/10.1016/j.addma.2018.05.017, Volume 22C, Pages 307--319, [BibTeX][Abstract]
  
  
• T. Bänziger, A. Kunz, K. Wegener, Optimizing Human-Robot Task Allocation using a Simulation Tool based on Standardized Work Descriptions, Journal of Intelligent Manufacturing, 2018, ISBN 0956-5515, ISSN 1572-8145, DOI 10.1007/s10845-018-1411-1, Pages 1635--1648, [BibTeX][Abstract][Paper]
  
  
• M. Wiessner, P. Blaser, S. Böhl, J. Mayr, W. Knapp, K. Wegener, Thermal test piece for 5-axis machine tools, Precision Engineering, 2018, DOI https://doi.org/10.1016/j.precisioneng.2018.01.017, Issue 52, Pages 407--417, [BibTeX][Abstract]
  
  
• M. Afrasiabi, M. Röthlin, K. Wegener, Thermal simulation in multiphase incompressible flows using coupled meshfree and particle level set methods, Computer Methods in Applied Mechanics and Engineering, 2018, ISSN ISSN 0045-7825, DOI 10.1016/j.cma.2018.03.021, Issue 336C, Pages 667--694, [BibTeX][Abstract]
  
  
• F. Wirth, S. Arpagaus, K. Wegener, Analysis of melt pool dynamics in laser cladding and direct metal deposition by automated high-speed camera image evaluation, Additive Manufacturing, 2018, ISSN 2214-8604, DOI https://doi.org/10.1016/j.addma.2018.03.025, Volume 21, Pages 369--382, [BibTeX][Abstract][Video]
  
  
• M. Postel, O. Ozsahin, Y. Altintas, High speed tooltip FRF predictions of arbitrary tool-holder combinations based on operational spindle identification, International Journal of Machine Tools and Manufacture, 2018, DOI 10.1016/j.ijmachtools.2018.03.004, Volume 129, Pages 48--60, [BibTeX][Abstract]
  
  
• M. Afrasiabi, E. Chatzi, K. Wegener, A Particle Strength Exchange Method for Metal Removal in Laser Drilling, Procedia CIRP, 2018, ISSN 2212-8271, DOI 10.1016/j.procir.2018.03.287, Issue 72C, Pages 1548--1553, [BibTeX][Abstract]
  
  
• K. Ruhm, The signal relation diagram – A Metrological Tool?, Measurement, 2018, DOI http://dx.doi.org/10.1016/j.measurement.2017.05.060, Issue 127, Pages 588--595, [BibTeX][Abstract]
  
  
• M. Vetterli, M. Schmid, W. Knapp, K. Wegener, New horizons in selective laser sintering surface roughness characterization, Surface Topography: Metrology and Properties, 2017, DOI https://doi.org/10.1088/2051-672X/aa88ee, Volume 5, Issue 4, Pages 045007, [BibTeX][Abstract]
  
  
• A. Spierings, K. Dawson, P. Uggowitzer, K. Wegener, Influence of SLM scan-speed on microstructure, precipitation of Al3Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys, Materials and Design, 2017, United Kingdom, Volume 140, Pages 134--143, [BibTeX][Abstract]
  
  
• X. Li,, T. Ivas,, A. Spierings, K. Wegener, C. Leinenbach, Phase and microstructure formation in rapidly solidi fi ed Cu-Sn and Cu-Sn-Ti alloys, Journal of Alloys and Compounds, 2017, DOI https://doi.org/10.1016/j.jallcom.2017.11.237, Volume 735, Pages 1374--1382, [BibTeX][Abstract][Paper]
  
  
• M. Kuffa, F. Kuster, K. Wegener, Stochastic Kinematic Process Model with an ImplementedWear Model for High Feed Dry Grinding, Inventions, Modern Grinding Technology and Systems, 2017, Volume 2, Issue 4, [BibTeX][Abstract][Paper]
  
  
• A. Mohammadi, S. Züst, J. Mayr, P. Blaser, S. Rostgaard, H. Henri, K. Wegener, A methodology for online visualization of the energy flow in a machine tool, CIRP Journal of Manufacturing Science and Technology, 2017, ISSN 1755-5817, DOI http://www.sciencedirect.com/science/article/pii/S1755581717300421, Volume 19, Pages 138--146, [BibTeX][Abstract][Paper]
  
  
• M. Warhanek, J. Mayr, C. Dörig, K. Wegener, Accurate Micro-Tool Manufacturing by Iterative Pulsed-Laser Ablation, Lasers in Manufacturing and Materials Processing, 2017, ISSN 2196-7229, DOI https://doi.org/10.1007/s40516-017-0046-y, Pages 1-12, [BibTeX][Abstract]
  
  
• T. Gutowski, S. Jiang, D. Cooper, G. Corman, M. Hausman, J. Manson, T. Schudeleit, K. Wegener, M. Sabelle, J. Ramos-Grez, D. Sekulic, Note on the rate and limits for Additive Manufacturing, Journal of Industrial Ecology, 2017, [BibTeX]
  
  
• C. Kenel, G. Dasargyri, T. Bauer, A. Collella, A. Spierings, C. Leinenbach, K. Wegener, Selective laser melting of an oxide dispersion strengthened (ODS) γ-TiAl alloy towards production of complex structures, Materials and Design, 2017, DOI /10.1016/j.matdes.2017.08.034, Volume 134, Pages 81--90, [BibTeX][Abstract]
  
  
• B. Gurdial, S. Claudia, M. Vetterli, E. Bruno, D. Roland, B. Peter, K. Jakob, Performance of lightweight coated oxide ceramic composites for industrial high speed wood cutting tools: A step closer to market, Ceramics International, 2017, ISSN 0272-8842, DOI https://doi.org/10.1016/j.ceramint.2017.04.005, Volume 43, Issue 12, Pages 8735--8742, [BibTeX][Abstract]
  
  
• K. Wegener, F. Bleicher, P. Krajnik, H. Hoffmeister, C. Brecher, Recent developments in grinding machines, CIRP Annals - Manufacturing Technology, 2017, DOI 10.1016/j.cirp.2017.05.006, Volume 66, Issue 2, Pages 779--802, [BibTeX][Abstract][Paper]
  
  
• R. Voss, L. Seeholzer, F. Kuster, K. Wegener, Influence of fibre orientation, tool geometry and process parameters on surface quality in milling of CFRP, CIRP Journal of Manufacturing Science and Technology, 2017, DOI https://doi.org/10.1016/j.cirpj.2016.10.002, Volume 18, Pages 75--91, [BibTeX][Abstract]
  
  
• M. Cloots, L. Zumofen, A. Spierings, A. Kirchheim, K. Wegener, Approaches to minimize overhang angles of SLM parts, Rapid Prototyping Journal, 2017, United Kingdom, ISSN 1355-2546, Volume 23, Issue 2, Pages 362--369, [BibTeX][Abstract]
  
  
• d. José, D. Mronga, M. Günther, T. Knobloch, M. Wirkus, M. Schröer, M. Trampler, S. Stiene, E. Kirchner, V. Bargsten, T. Bänziger, J. Teiwes, T. Krüger, F. Kirchner, Multimodal sensor-based whole-body control for human--robot collaboration in industrial settings, Robotics and Autonomous Systems, 2017, DOI 10.1016/j.robot.2017.04.007, Volume 94, Pages 102--119, [BibTeX][Abstract]
  
  
• G. de, D. Mronga, M. Günther, M. Wirkus, M. Schrör, S. Stiene, E. Kirchner, V. Bargsten, T. Bänziger, J. Teiwes, T. Krüger, F. Kirchner, iMRK: Demonstrator for Intelligent and Intuitive Human--Robot Collaboration in Industrial Manufacturing, KI - Künstlicher Intelligenz, 2017, DOI 10.1007/s13218-016-0481-5, Volume 31, Issue 2, Pages 203--207, [BibTeX][Abstract]
  
  
• K. Wegener, J. Mayr, M. Merklein, B. Behrens, T. Aoyama, M. Sulitka, J. Fleischer, P. Groche, B. Kaftanoglu, N. Jochum, H. Möhring, Fluid elements in machine tools, CIRP Annals - Manufacturing Technology, 2017, DOI 10.1016/j.cirp.2017.05.008, Volume 66, Pages 611--634, [BibTeX][Abstract][Paper]
  
  
• P. Blaser, F. Pavliček, K. Mori, J. Mayr, S. Weikert, K. Wegener, Adaptive learning control for thermal error compensation of 5-axis machine tools, Journal of Manufacturing Systems, 2017, USA, ISSN 0278-6125, DOI https://doi.org/10.1016/j.jmsy.2017.04.011, Volume 44, Issue 2, Pages 302--309, [BibTeX][Abstract]
  
  
• A. Perec, F. Pude, M. Kaufeld, K. Wegener, Obtaining the Selected Surface Roughness by Means of Mathematical Model Based Parameter Optimization in Abrasive Waterjet Cutting, 2017 Journal of Mechanical Engineering, 2017, Ljubljana, Slovenia, ISSN ISSN 0039-2480, DOI 10.5545/sv-jme.2017.4463, Volume 63, Issue 10, Pages 606--613, [BibTeX][Abstract][Paper]
  
  
• M. Schmidt, M. Merklein, D. Bourell, D. Dimitrov, T. Hausotte, K. Wegener, L. Overmeyer, F. Vollertsen, G. Levy, Laser based additive manufacturing in industry and academia, CIRP Annals - Manufacturing Technology, 2017, DOI 10.1016/j.cirp.2017.05.011, Volume 66, Pages 561--583, [BibTeX][Abstract][Paper]
  
  
• A. Spierings, K. Dawson, K. Kern, F. Palm, K. Wegener, SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment, Materials Science and Engineering A, 2017, ISSN 0921-5093, Volume 701, Pages 264–-273, [BibTeX][Abstract]
  
  
• M. Schmid, R. Kleijnen, M. Vetterli, K. Wegener, Influence of the Origin of Polyamide 12 Powder on the Laser Sintering Process and Laser Sintered Parts, Applied Science, 2017, Basel, Switzerland, DOI 10.3390/app7050462, Volume 7, Pages 462--477, [BibTeX][Abstract][Paper]
  
  
• J. Mathew, C. Hauser, P. Stoll, C. Kenel, D. Polyzos, D. Havermann, W. MacPherson, D. Hand, C. Leinenbach, A. Spierings, K. Koenig-Urban, R. Maier, Integrating fibre Fabry-Perot cavity sensor in to 3D printed metal components for extreme high temperature monitoring applications, IEEE Sensor Journal, 2017, Volume 13, Issue 19, Pages 4107--4114, [BibTeX][Abstract][Paper]
  
  
• T. Heeling, M. Cloots, K. Wegener, Melt pool simulation for the evaluation of process parameters in selective laser melting, Additive Manufacturing, 2017, DOI http://dx.doi.org/10.1016/j.addma.2017.02.003, Volume 14, Pages 116-125, [BibTeX]
  
  
• D. Flore, K. Wegener, H. Mayer, U. Karr, C. Oetting, Investigation of the high and very high cycle fatigue behaviour of continuous fibre reinforced plastics by conventional and ultrasonic fatigue testing, Composites Science and Technologie, 2017, ISSN 0266-3538, DOI http://dx.doi.org/10.1016/j.compscitech.2017.01.018, Issue 141, Pages 130-136, [BibTeX][Abstract]
  
  
• K. Ruhm, Measurement plus observation – A new structure in metrologyr, Measurement, 2017, ISBN 0263-2241, DOI http://dx.doi.org/10.1016/j.measurement.2017.03.040, Volume 126, Pages 421--432, [BibTeX][Abstract][Paper]
  
  
• F. Barata De Macedo, M. Wiessner, C. Hollenstein, P. Esteves, K. Wegener, Fundamental investigation of dry electrical discharge machining (DEDM) by optical emission spectroscopy and its numerical interpretation, The International Journal of Advanced Manufacturing Technology, 2016, DOI 10.1007/s00170-016-9687-9, Pages 13, [BibTeX][Abstract]
  
  
• A. Spierings, K. Dawson, T. Heeling, P. Uggowitzer, R. Schaeublin, F. Palm, Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting, Materials & Design, 2016, DOI doi.org/10.1016/j.matdes.2016.11.040, Volume 115, Pages 52--63, [BibTeX][Abstract]
  
  
• K. Wegener, S. Weikert, J. Mayr, Age of Compensation – Challenge and Chance for Machine Tool Industry, International Journal of Automation Technology, 2016, DOI 10.20965/ijat.2016.p0609, Volume 10, Issue 4, Pages 609--623, [BibTeX][Abstract]
  
  
• T. Haas, M. Warhanek, M. Dietlicher, K. Wegener, Increased Productivity for Redundant Laser Scanners Using an Optimal Trajectory Separation Method, International Journal of Automation Technology, 2016, DOI doi: 10.20965/ijat.2016.p0941, Volume 10, Issue 6, Pages 941--949, [BibTeX][Abstract]
  
  
• T. Schudeleit, S. Züst, K. Wegener, Energy Equivalents to Quantify the Total Electricity Consumption of Factory-integrated Machine Tools, International Journal of Advanced Manufacturing Technology, 2016, DOI 10.1007/s00170-016-9659-0, Pages 1--9, [BibTeX][Abstract]
  
  
• L. Fischer, S. vonArx, U. Wechsler, S. Züst, J. Worlitschek, Phase change dispersion properties, modelling apparent heat capacity, International Journal of Refrigeration, 2016, DOI 10.1016/j.ijrefrig.2016.10.008, Volume 74, Pages 238--251, [BibTeX][Abstract]
  
  
• D. Flore, K. Wegener, B. Stampfer, Experimental and numerical failure analysis of notched quasi-unidirectional laminates at room temperature and elevated temperature, Composite Structures, 2016, ISSN 0263-8223, DOI http://dx.doi.org/10.1016/j.compstruct.2016.10.046, Issue 160, Pages 128--141, [BibTeX][Abstract]
  
  
• T. Haas, S. Weikert, K. Wegener, Distribution of motion for 5-axis machine tools utilising quasi-redundancy, International Journal of Mechatronics and Manufacturing Systems, 2016, DOI 10.1504/IJMMS.2016.079593, Volume 9, Issue 3, Pages 254--271, [BibTeX][Abstract]
  
  
• M. Kuffa, F. Kuster, K. Wegener, Comparison of lubrication conditions for grinding of mild steel with electroplated cBN wheel, CIRP Journal of Manufacturing Science and Technology, 2016, DOI doi.org/10.1016/j.cirpj.2016.09.002, Volume 18, [BibTeX][Abstract][Paper]
  
  
• S. Züst, F. Pavliček, L. Fischer, L. Weiss, K. Wegener, Thermo-energetic modelling of machine tool spindles with active cooling based on macro models, International Journal of Mechatronics and Manufacturing Systems, 2016, DOI 10.1504/IJMMS.2016.079585, Volume 9, Issue 3, Pages 197--214, [BibTeX]
  
  
• R. Voß, M. Henerichs, D. Harsch, F. Kuster, K. Wegener, Optimised approach for characterisation of cutting edge micro-geometry in drilling carbon fibre reinforced plastics (CFRP), The International Journal of Advanced Manufacturing Technology, 2016, DOI DOI 10.1007/s00170-016-9302-0, [BibTeX][Abstract]
  
  
• M. Akbari, S. Buhl, C. Leinenbach, K. Wegener, A New Value for Johnson Cook Damage Limit Criterion in Machining with Large Negative Rake Angle as Basis for Understanding of Grinding, Journal of Materials Processing Technology, 2016, DOI http://dx.doi.org/10.1016/j.jmatprotec.2016.03.009, Volume 234, Pages 58--71, [BibTeX][Abstract]
  
  
• M. Kuffa, F. Kuster, K. Wegener, A new grinding strategy to improve the acoustic properties of railway tracks, ournal of Rail and Rapid Transit, Journal of Rail and Rapid Transit, 2016, [BibTeX][Abstract]
  
  
• T. Schudeleit, S. Züst, L. Weiss, K. Wegener, Machine Tool Energy Efficiency – A Component Mapping-Based Approach, International Journal of Automation Technology, 2016, Volume 10, Issue 5, Pages 717--726, [BibTeX][Abstract]
  
  
• R. Voß, M. Henerichs, F. Kuster, Comparison of conventional drilling and orbital drilling in machining carbon fibre reinforced plastics (CFRP), CIRP Annals - Manufacturing Technology, 2016, Guimaraes, Portugal, DOI http://dx.doi.org/10.1016/j.cirp.2016.04.001, Volume 65, Issue 1, Pages 137-140, [BibTeX][Abstract][Paper]
  
  
• P. Butler-Smith, M. Warhanek, D. Axinte, M. Fay, J. Bucourt, R. Ragueneau, K. Wegener, The influences of pulsed-laser-ablation and electro-discharge-grinding processes on the cutting performances of polycrystalline diamond micro-drills, CIRP Annals - Manufacturing Technology, 2016, DOI http://dx.doi.org/10.1016/j.cirp.2016.04.008, Volume 2016, Issue 65, Pages 105-108, [BibTeX][Abstract]
  
  
• G. Eberle, M. Schmidt, F. Pude, K. Wegener, Laser surface and subsurface modification of sapphire using femtosecond pulses, Applied Surface Science, 2016, DOI 10.1016/j.apsusc.2016.04.032, Volume 378, Pages 504–512, [BibTeX][Abstract]
  
  
• A. Spierings, K. Dawson, M. Voegtlin, F. Palm, P. Uggowitzer, Microstructure and mechanical properties of as-processed Scandium-modified aluminium using Selective Laser Melting, CIRP Annals - Manufacturing Technology, 2016, DOI 10.1016/j.cirp.2016.04.057, Volume 1, Issue 65, Pages 213--216, [BibTeX][Abstract][Paper]
  
  
• D. Flore, K. Wegener, D. Seel, C. Oetting, T. Bublat, Investigation of chemical ageing and its effect on static and fatigue strength of continuous fibre reinforced plastics, Composites: Part A, 2016, ISSN 1359-835X, DOI http://dx.doi.org/10.1016/j.compositesa.2016.08.001, Issue 90, Pages 359-370, [BibTeX][Abstract]
  
  
• M. Warhanek, C. Walter, M. Hirschi, J. Boos, J. Bucourt, K. Wegener, Comparative analysis of tangentially laser-processed fluted polycrystalline diamond drilling tools, Journal of Manufacturing Processes, 2016, DOI http://dx.doi.org/10.1016/j.jmapro.2016.06.023, Volume 2016, Issue 23, Pages 157-164, [BibTeX][Abstract]
  
  
• D. Flore, K. Wegener, Influence of fibre volume fraction and temperature on fatigue life of glass fibre reinforced plastics, AIMS Materials Science, 2016, Springfield, USA, Issue 3, Pages 770-795, [BibTeX][Abstract][Paper]
  
  
• M. Schmid, K. Wegener, Additive Manufacturing: Polymers Applicable for Laser Sintering (LS), Proceeding Engineering, 2016, ISSN 1877-7058, DOI doi:10.1016/j.proeng.2016.06.692, Volume 149, Pages 457--464, [BibTeX][Abstract][Paper]
  
  
• F. Hashimoto, H. Yamaguchi, P. Krajnik, K. Wegener, R. Chaudhari, H. Hoffmeister, Abrasive fine-finishing technology, CIRP 65/2, 2016, DOI 10.1016/j.cirp.2016.06.003, Volume 65, Pages 597--620, [BibTeX][Abstract]
  
  
• S. Ibaraki, P. Blaser, M. Shimoike, N. Takayama, M. Nakaminami, Y. Ido, Measurement of thermal influence on a two-dimensional motion trajectory using a tracking interferometer, CIRP Annals, 2016, DOI http://dx.doi.org/10.1016/j.cirp.2016.04.067, Volume 65, Issue 1, Pages 483--486, [BibTeX][Abstract]
  
  
• T. Tancogne-Dejean,, A. Spierings, D. Mohr, Additively-manufactured metallic micro-lattice materials for high specific energy absorption under static and dynamic loading, Acta Materialia, 2016, ISSN 1359-6454, DOI http://dx.doi.org/10.1016/j.actamat.2016.05.054, Volume 116, Pages 14--28, [BibTeX][Abstract][Paper]
  
  
• M. Zank, A. Kunz, Where are you going? Using human locomotion models for target estimation, The Visual Computer - International Journal of Computer Graphics, 2016, Springer, Germany, ISBN 0178-2789, ISSN 1432-2315, DOI 10.1007/s00371-016-1229-9, Volume 32, Issue 10, Pages 1323--1335, [BibTeX][Abstract][Paper]
  
  
• M. Akbari, W. Knapp, K. Wegener, Comparison of Transparent Objects Metrology through Diamond Cutting Edge Radii Measurements, CIRP Journal of Manufacturing Science and Technology, 2016, ISSN 1755-5817, 1878-0016, DOI http://dx.doi.org/10.1016/j.cirpj.2015.12.001, Volume 13, Pages 72--84, [BibTeX][Abstract]
  
  
• F. Sellmann, T. Haas, H. Nguyên, S. Weikert, K. Wegener, Orientation Smoothing for 5-Axis Machining Using Quasi-Redundant Degrees of Freedom, International Journal of Automation Technology, 2016, Volume 10, Issue 02, Pages 262--271, [BibTeX][Abstract]
  
  
• F. Sellmann, T. Haas, H. Nguyên, S. Weikert, K. Wegener, Geometry Optimisation for 2D Cutting: A Quadratic Programming Approach, International Journal of Automation Technology, 2016, DOI 10.20965/ijat.2016.p0272, Volume 10, Issue 02, Pages 272--281, [BibTeX][Abstract]
  
  
• T. Schudeleit, S. Züst, L. Weiss, K. Wegener, The Total Energy Efficiency Index for Machine Tools, Energy, 2016, DOI http://dx.doi.org/10.1016/j.energy.2016.02.126, Volume 102, Issue 1, Pages 682--693, [BibTeX][Abstract]
  
  
• M. Pepels, R. Kleijnen, H. Goossens, A. Spoelstra, R. Tandler, H. Martens, M. Soliman, R. Duchateau, Compatibility and epitaxial crystallization between Poly(ethylene) and Poly(ethylene)-like polyesters, Polymer, 2016, DOI 10.1016/j.polymer.2016.01.035, Volume 88, Pages 63--70, [BibTeX][Abstract]
  
  
• R. Voß, M. Henerichs, S. Rupp, F. Kuster, K. Wegener, Evaluation of bore exit quality for fibre reinforced plastics including delamination and uncut fibres, CIRP Journal of Manufacturing Science and Technology, 2016, Zurich, Switzerland, ISSN 1755-5817, DOI http://dx.doi.org/10.1016/j.cirpj.2015.09.003, Volume 12, Pages 56--66, [BibTeX][Abstract][Paper]
  
  
• J. Mayr, M. Egeter, S. Weikert, K. Wegener, Thermal error compensation of rotary axes and main spindles using cooling power as input parameter, Journal of Manufacturing Systems, 2015, DOI 10.1016/j.jmsy.2015.04.003, Volume 37, Issue 2, Pages 542--549, [BibTeX][Abstract]
  
  
• T. Schudeleit, S. Züst, K. Wegener, Methods for Evaluation of Energy Efficiency of Machine Tools, Energy, 2015, DOI http://dx.doi.org/10.1016/j.energy.2015.10.074, Volume 93, Issue 2, Pages 1964--1970, [BibTeX][Abstract]
  
  
• G. Eberle, C. Dold, K. Wegener, Laser fabrication of diamond micro-cutting tool-related geometries using a high-numerical aperture micro-scanning system, The International Journal of Advanced Manufacturing Technology, 2015, ISSN 0268-3768, 1433-3015, DOI 10.1007/s00170-015-7240-x, Volume 81, Issue 5, Pages 1117-1125, [BibTeX][Abstract]
  
  
• M. Zank, T. Nescher, A. Kunz, Predicting audio step feedback for real walking in virtual environments, Computer Animation and Virtual Worlds, 2015, ISSN 1546-427X, DOI 10.1002/cav.1611, Volume 26, Issue 6, Pages 537--547, [BibTeX][Abstract][Paper]
  
  
• M. Cloots, P. Uggowitzer, K. Wegener, Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles, Materials and Design, 2015, ISSN 0264-1275, 0261-3069, 1873-4197, DOI 10.1016/j.matdes.2015.10.027, Volume 89, Pages 770--784, [BibTeX][Abstract]
  
  
• D. Flore, K. Wegener, Modelling the mean stress effect on fatigue life of fibre reinforced plastics, International Journal of Fatigue, 2015, ISSN 0142-1123, DOI http://dx.doi.org/10.1016/j.ijfatigue.2015.09.027, Volume 82, Issue 3, Pages 689--699, [BibTeX][Abstract]
  
  
• M. Pepels, W. Hofman, R. Kleijnen, A. Spoelstra, C. Koning, H. Goossens, R. Duchateau, Block Copolymers of "PE-Like" Poly(pentadecalactone) and Poly(L-lactide): Synthesis, Properties, and Compatibilization of Polyethylene/Poly(L-lactide) Blends, Macromolecules, 2015, DOI 10.1021/acs.macromol.5b01620, Volume 48, Issue 19, Pages 6909-6921, [BibTeX][Abstract]
  
  
• P. Stoll, A. Spierings, K. Wegener, Gute Poren - Erwünschte Porosität in SLM-Werkstücken, RTejournal, 2015, Aachen, Germany, Volume Vol. 2015, Issue Iss. 1, [BibTeX][Abstract][Paper]
  
  
• A. Perec, F. Pude, J. Stirnimann, K. Wegener, Feasibility Study On The Use Of Fractal Analysis For Evaluating The Surface Quality Generated By Waterjet, Technical Gazette, 2015, Croatia, ISSN 1330-3651, DOI 10.17559/TV-20140128231244, Volume 22, Issue 4, Pages 879--883, [BibTeX][Abstract][Paper]
  
  
• K. Ruhm, Dynamics and Stability – A Proposal for Related Terms in Metrology from a Mathematical Point of View, Measurement (Elsevier), 2015, London, United Kingdom, [BibTeX][Abstract][Paper]
  
  
• A. Spierings, M. Voegtlin, T. Bauer, K. Wegener, Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing, Progress in Additive Manufacturing, 2015, Berlin, Germany, ISSN 2363-9512, DOI 10.1007/s40964-015-0001-4, Volume 1, Issue 1, Pages 9--20, [BibTeX][Abstract][Paper]
  
  
• U. Maradia, R. Knaak, W. DalBusco, M. Boccadoro, K. Wegener, A strategy for low electrode wear in meso–micro-EDM, Precision Engineering, 2015, DOI http://dx.doi.org/10.1016/j.precisioneng.2015.06.005, Volume 42, Pages 302--310, [BibTeX][Abstract]
  
  
• i. Huis, L. Overmeyer, M. Schmidt, K. Wegener, A. Malshe, P. Bartolo, Micro additive manufacturing using ultra short laser pulses, CIRP Annals, 2015, ISSN 0007-8506, DOI 10.1016/j.cirp.2015.05.007, Volume 64, Issue 2, Pages 701--724, [BibTeX][Abstract]
  
  
• U. Maradia, R. Knaak, W. DalBusco, M. Boccadoro, J. Stirnimann, K. Wegener, Spark location adaptive process control in meso-micro EDM, The International Journal of Advanced Manufacturing Technology, 2015, ISSN 1433-3015, 0268-3768, DOI 10.1007/s00170-015-7316-7, Volume 81, Issue 9, Pages 1577--1589, [BibTeX][Abstract]
  
  
• L. Bochmann, L. Gehrke, A. Böckenkamp, F. Weichert, R. Albersmann, C. Prasse, C. Mertens, M. Motta, K. Wegener, Towards Decentralized Production: A Novel Method to Identify Flexibility Potentials in Production Sequences Based on Flexibility Graphs, International Journal of Automation Technology, 2015, ISBN 1881-7629, ISSN 1883-8022, DOI 10.20965/ijat.2015.p0270, Volume 9, Issue 3, Pages 270--282, [BibTeX][Abstract][Paper]
  
  
• M. Warhanek, C. Walter, S. Huber, F. Hänni, K. Wegener, Cutting characteristics of electroplated diamond tools with laser-generated positive clearance, CIRP Annals - Manufacturing Technology, 2015, DOI 10.1016/j.cirp.2015.04.010, Volume 64, Pages 317--320, [BibTeX][Abstract]
  
  
• U. Maradia, M. Boccadoro, J. Stirnimann, F. Kuster, K. Wegener, Electrode wear protection mechanism in meso-micro-EDM, Journal of Materials Processing Technology, 2015, DOI 10.1016/j.jmatprotec.2015.03.039, Volume 223, Pages 22--33, [BibTeX][Abstract]
  
  
• C. Leinenbach, R. Transchel, K. Gorgievski, F. Kuster, H. Elsener, K. Wegener, Microstructure and Mechanical Performance of Cu-Sn-Ti-Based Active Braze Alloy Containing In Situ Formed Nano-Sized TiC Particles, Journal of Materials Engineering and Performance, 2015, ISBN 1059-9495, ISSN 1544-1024, DOI 10.1007/s11665-015-1471-8, Volume 24, Issue 5, Pages 2042--2050, [BibTeX][Abstract]
  
  
• A. Alavi, A. Kunz, Tracking Deictic Gestures over Large Interactive Surfaces, Computer Supported Cooperative Work, 2015, JCSCW, Germany, ISBN 0925-9724, ISSN 1573-7551, DOI 10.1007/s10606-015-9219-4, Volume 24, Issue 2, Pages 109-119, [BibTeX][Abstract][Paper]
  
  
• A. Chandra, G. Anderson, W. Gao, H. Haitjema, K. Wegener, Role of surfaces and interfaces in solar cell manufacturing, CIRP Annals - Manufacturing Technology, 2015, Nantes, France, ISSN 0007-8506, DOI http://dx.doi.org/10.1016/j.cirp.2014.05.008, Volume 63, Issue 2, Pages 797--819, [BibTeX][Abstract][Paper]
  
  
• U. Maradia, C. Hollenstein, K. Wegener, Temporal characteristics of the pulsed electric discharges in small gaps filled with hydrocarbon oil, Journal of Physics D: Applied Physics, 2015, DOI 10.1088/0022-3727/48/5/055202, Volume 48, Pages 15, [BibTeX][Abstract]
  
  
• L. Bochmann, C. Bayley, M. Helu, R. Transchel, K. Wegener, D. Dornfeld, Understanding error generation in fused deposition modeling, Surface Topography: Metrology and Properties, 2015, DOI 10.1088/2051-672X/3/1/014002, Volume 3, Issue 1, [BibTeX]
  
  
• M. Gebhardt, A. Schneeberger, S. Weikert, W. Knapp, K. Wegener, Thermally Caused Location Errors of Rotary Axes of 5-Axis Machine Tools, International Journal of Automation Technology, 2014, Tokyo, Japan, ISBN 1881-7629, DOI 10.20965/ijat.2014.p0511, Volume 08, Issue 4, Pages 511--522, [BibTeX][Abstract][Paper]
  
  
• M. Henerichs, R. Voß, F. Kuster, K. Wegener, Machining of Carbon Fiber Reinforced Plastics: Influence of Tool Geometry and Fiber Orientation on the Machining Forces, CIRP Journal of Manufacturing Science and Technology, 2014, ISSN 1755-5817, 1878-0016, DOI 10.1016/j.cirpj.2014.11.002, Volume 9, Pages 136--145, [BibTeX][Abstract][Paper]
  
  
• A. Spierings, M. Schöpf, R. Kiesel, K. Wegener, Optimisation of SLM productivity by aligning SLM 17-4PH material properties on part requirements, Rapid Prototyping Journal, 2014, United Kingdom, ISSN 1355-2546, DOI 10.1108/RPJ-04-2013-0045, Volume 20, Issue 6, Pages 444--448, [BibTeX][Abstract][Paper]
  
  
• B. Rüttimann, U. Fischer, M. Stöckli, Leveraging Lean in the Office: Lean Office Needs a Novel and Differentiated Approach, Scientific Research, 2014, Pages 352-360, [BibTeX][Paper]
  
  
• M. Schmid, F. Amado, K. Wegener, Materials perspective of polymers for additive manufacturing with selective laser sintering, Journal of Materials Research, 2014, United Kingdom, DOI 10.1557/jmr.2014.138, Volume 29, Issue 17, Pages 1824--1832, [BibTeX][Abstract][Paper]
  
  
• A. Spierings, C. Leinenbach, C. Kenel, K. Wegener, Processing of Metal-Diamond-Composites using Selective Laser Melting, Rapid Prototyping Journal, 2014, USA, ISSN 1355-2546, DOI 10.1108/RPJ-11-2014-0156, Volume 21, Issue 1, Pages 130--136, [BibTeX][Abstract][Paper]
  
  
• G. Eberle, K. Jefimovs, K. Wegener, Characterisation of thermal influences after laser processing polycrystalline diamond composites using long to ultrashort pulse durations, Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, 2014, ISSN 0141-6359, DOI 10.1016/j.precisioneng.2014.06.008, Volume 39, Pages 16--24, [BibTeX][Abstract]
  
  
• K. Deibel, C. Raemy, K. Wegener, Modeling Slice-Push Cutting Forces of a Sheet Stack based on Fracture Mechanics, Engineering Fracture Mechanics, 2014, ISSN 0013-7944, DOI http://dx.doi.org/10.1016/j.engfracmech.2014.04.029, Volume 124-125, Pages 234--247, [BibTeX][Abstract]
  
  
• D. Chen, S. Thiede, T. Schudeleit, C. Herrmann, A holistic and rapid sustainability assessment tool for manufacturing SMEs, CIRP Annals - Manufacturing Technology, 2014, DOI http://dx.doi.org/10.1016/j.cirp.2014.03.113, Volume 63, Issue 1, Pages 437--440, [BibTeX][Abstract]
  
  
• K. Deibel, K. Fabian, Z. Remo, M. Linus, B. Peter, K. Wegener, Longitudinal ultrasonic vibration assisted guillotining of stacked paper, Ultrasonics, 2014, ISSN 0041-624X, DOI http://dx.doi.org/10.1016/j.ultras.2014.03.013, Volume 54, Issue 6, Pages 1585--1593, [BibTeX][Abstract]
  
  
• C. Walter, T. Komischke, F. Kuster, K. Wegener, Laser-structured Grinding Tools - Generation of Prototype Patterns and Performance Evaluation, Journal of Materials Processing Technology, 2014, DOI 10.1016/j.jmatprotec.2013.11.015, Volume 214, Pages 951--961, [BibTeX][Abstract]
  
  
• R. Transchel, C. Leinenbach, K. Wegener, Cutting and ploughing forces for small clearance angles of hexa-octahedron shaped diamond grains, CIRP Annals - Manufacturing Technology, 2014, ISSN 0007-8506, 1660-2773, 1726-0604, DOI 10.1016/j.cirp.2014.03.030, Volume 63, Issue 1, Pages 325--328, [BibTeX][Abstract]
  
  
• G. Vargas Evangelista, K. Wegener, F. Kuster, B. Schroeter, Simulation of the hone broaching process with diamond tools, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2014, ISSN 1678-5878, DOI 10.1007/s40430-013-0085-z, Volume 36, Issue 2, Pages 323--333, [BibTeX][Abstract][Paper]
  
  
• M. Henerichs, M. Egeter, T. Liebrich, R. Voß, K. Wegener, Evaluation of the IWF-Wunder Reproduction Method for Generating Positive Replica, International Journal of Automation Technology, 2014, Japan, ISSN 1881-7629; 1883-8022, Volume Vol.8, Issue No.1, Pages 49--56, [BibTeX][Abstract][Paper]
  
  
• J. Monnin, F. Kuster, K. Wegener, Optimal control for chatter mitigation in milling, Part 2: Experimental validation, Control engineering practice, 2013, DOI 10.1016/j.conengprac.2013.11.011, Volume 24, Pages 167--175, [BibTeX][Abstract][Paper]
  
  
• J. Monnin, F. Kuster, K. Wegener, Optimal control for chatter mitigation in milling, Part 1: Modelling and control design, Control Engineering Practice, 2013, DOI 10.1016/j.conengprac.2013.11.010, Volume 24, Pages 156--166, [BibTeX][Abstract][Paper]
  
  
• K. Deibel, S. Lämmlein, K. Wegener, Model of Slice-Push Cutting Forces of stacked thin Material, Journal of Materials Processing Technology, 2013, DOI http://dx.doi.org/10.1016/j.jmatprotec.2013.10.009, Volume 214, Pages 667--672, [BibTeX][Abstract]
  
  
• G. Eberle, C. Dold, K. Wegener, Building a vector model representation of a two-axis laser scanhead using numerical analysis for simulation purposes, International Journal of Modelling, Identification and Control, 2013, DOI 10.1504/IJMIC.2013.057131, Volume 20, Issue 3, Pages 119--207, [BibTeX][Abstract]
  
  
• R. Transchel, F. Heini, J. Stirnimann, F. Kuster, C. Leinenbach, K. Wegener, Influence of the clearance angle on the cutting efficiency of blunt, octahedral-shaped diamonds in an active filler alloy, International Journal of Machine Tools and Manufacture, 2013, DOI 10.1016/j.ijmachtools.2013.08.001, Volume 75, Pages 9--15, [BibTeX]
  
  
• H. Krötz, R. Roth, K. Wegener, Experimental Investigation and Simulation of Heatflux into Metallic Surfaces due to Single Discharges in micro Electrochemical Arc Machining (micro-ECAM), The International Journal of Advanced Manufacturing Technology, 2013, ISSN 0268-3768, DOI 10.1007/s00170-013-4918-9, Volume 68, Issue 5-8, Pages 1267--1275, [BibTeX][Abstract][Paper]
  
  
• A. Steinemann, J. Taiber, G. Fadel, K. Wegener, A. Kunz, Adapting Discrete-event Simulation Tools to Support Tactical Forecasting in the Automotive Industry, International Journal of CoCreation in Design and the Arts, 2013, ISBN 1571-0882, ISSN 1745-3755, DOI 10.1080/15710882.2013.824484, Volume 9, Issue 3, Pages 159--177, [BibTeX][Abstract][Paper]
  
  
• R. Roth, L. Beck, B. Hartmi, F. Kuster, E. Weingärtner, K. Wegener, Influence of the Anode Material and the Flushing Gas on the Dry Electrical Discharge Machining Process, International Journal of Automation Technology, 2013, Volume Vol.7, Issue No.5, Pages 581--592, [BibTeX][Abstract]
  
  
• M. Gebhardt, M. Ess, S. Weikert, W. Knapp, K. Wegener, Phenomenological Compensation of Thermally caused Position and Orientation Errors of Rotary Axes, Journal of Manufacturing Processes, 2013, DOI 10.1016/j.jmapro.2013.05.007, Volume 15, Issue 4, Pages 452--459, [BibTeX][Abstract]
  
  
• K. Deibel, K. Wegener, Methodology for Shape Optimization of Ultrasonic Amplifier using Genetic Algorithms and Simplex Method, Journal of Manufacturing Systems, 2013, USA, DOI http://dx.doi.org/10.1016/j.jmsy.2013.05.010, Volume 32, Issue 4, Pages 523-528, [BibTeX][Abstract]
  
  
• G. Heinecke, A. Syntetos, W. Wang, Forecasting-Based SKU Classification, International Journal of Production Economics, 2013, DOI 10.1016/j.ijpe.2011.11.020, Volume 143, Issue 2, Pages 455--462, [BibTeX][Abstract]
  
  
• S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Failure mechanisms and cutting characteristics of brazed single diamond grains, International Journal of Advanced Manufacturing Technology, 2013, ISSN 0268-3768, 1433-3015, DOI 10.1007/s00170-012-4365-z, Volume 66, Issue 5-8, Pages 775--786, [BibTeX][Abstract]
  
  
• A. Kunz, A. Alavi, M. Fjeld, Multistatus Interaktionsgeräte für interaktive Tische, i-com: Zeitschrift für interaktive und kooperative Medien, 2013, München, Germany, ISSN 1618-162X, DOI 10.1524/icom.2013.0006, Volume 12, Issue 1, Pages 39--44, [BibTeX][Abstract][Paper]
  
  
• K. Wegener, E. Weingärtner, M. Blaser, In-process wire electrical discharge dressing (IWEDD) of metal bonded diamond wheels, CIRP Annals - Manufacturing Technology, 2013, Copenhagen, Denmark, ISSN 0007-8506, DOI http://dx.doi.org/10.1016/j.cirp.2013.03.072, Volume 62, Issue 1, Pages 339-342, [BibTeX][Abstract]
  
  
• A. Alavi, M. Fjeld, A. Kunz, Dual-channel Technology for Detecting Multi-state Devices on Tabletops, International Journal of Soft Computing and Software Engineering, 2013, ISSN 2251-7545, Pages to be published, [BibTeX][Abstract]
  
  
• T. Nescher, A. Kunz, Using Head Tracking Data for Robust Short Term Path Prediction of Human Locomotion, Transactions on Computational Science, 2013, ISSN 0302-9743, DOI 10.1007/978-3-642-38803-3_10, Volume XVIII, Pages 172--191, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, Collaborative Environments in the Product Ideation Phase, Advances in Computers and Information in Engineering, 2013, Pages to appear, [BibTeX]
  
  
• R. Lepratti, G. Heinecke, S. Lamparter, J. Scharnagl, R. Hansen, In Echtzeit: RFID-gestütztes Produktionsassistenzsystem, atp Edition, 2012, Germany, ISSN 0178-2320, Volume 11/2012, Pages 36-44, [BibTeX][Abstract]
  
  
• C. Vögtlin, G. Schulz, H. Deyhle, K. Jäger, T. Liebrich, S. Weikert, B. Müller, Comparison of denture models by means of micro computed tomography, Proceedings of SPIE Volume 8506, 2012, [BibTeX][Paper]
  
  
• A. Gontarz, F. Hänni, L. Weiss, K. Wegener, Machine Tool Optimization Strategies for Ecologic and Economic Efficiency, Journal of Engineering Manufacture - Volume 227 Issue 1, 2012, United Kingdom, DOI 10.1177/0954405412464932, Volume 227, Issue 1, Pages 54--61, [BibTeX][Abstract]
  
  
• V. Wessels, A. Grigoryev, C. Dold, C. Wyen, R. Roth, E. Weingärtner, F. Pude, K. Wegener, Abrasive waterjet machining of 3D structures from bulk metallic glasses and comparison with other techniques, Journal of Materials Research 27:08, 2012, Pages 1187--1192, [BibTeX]
  
  
• J. Mayr, J. Jedrzejewski, E. Uhlmann, A. Donmez, W. Knapp, F. Härtig, K. Wendt, T. Moriwaki, P. Shore, R. Schmitt, C. Brecher, T. Wuerz, K. Wegener, Thermal issues in machine tools, Annals of the CIRP 61/2, 2012, 2012, ISSN ISSN 0007-8506, DOI 10.1016/j.cirp.2012.05.008, Volume 61, Issue 2, Pages 771--791, [BibTeX][Abstract]
  
  
• W. Knapp, G. Goch,, Precision engineering for wind energy systems, Annals of the CIRP 61/2, 2012, 2012, ISSN ISSN 0007-8506., Pages 611--634, [BibTeX][Paper]
  
  
• T. Liebrich, W. Knapp, Improvements and experimental validation of a 3D-probing system for micro-components, CIRP Annals - Manufacturing Technology, 2012, DOI http://dx.doi.org/10.1016/j.cirp.2012.03.107, Volume 61, Issue 1, Pages 475--478, [BibTeX][Abstract][Paper]
  
  
• T. Liebrich, W. Knapp, K. Wegener, Realisierung und Überprüfung eines 3D-Tastsystems für Mikro-Bauteile, tm - Technisches Messen, 2012, Germany, Volume 80, Issue 6, Pages 201--205, [BibTeX][Abstract]
  
  
• C. Walter, M. Rabiey, M. Warhanek, N. Jochum, K. Wegener, Dressing and truing of hybrid bonded CBN grinding tools using a short-pulsed fibre laser, CIRP Annals - Manufacturing Technology, 2012, ISSN 0007-8506, DOI 10.1016/j.cirp/2012.03.001, Volume 61, Issue 1, Pages 279--282, [BibTeX][Abstract]
  
  
• M. Rabiey, C. Walter, F. Kuster, J. Stirnimann, F. Pude, K. Wegener, Dressing of Hybrid Bond CBN Wheels Using Short-Pulse Fiber Laser, Strojniški vestnik - Journal of Mechanical Engineering, 2012, ISSN 0039-2480, DOI 10.5545/sv-jme.2011.166, Volume 58, Issue 7-8, Pages 462--469, [BibTeX][Abstract]
  
  
• M. Akbari, S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Thermomechanical Analysis of Residual Stresses In Brazed Diamond Metal Joints Using Raman Spectroscopy And Finite Element Simulation, Mechanics of Materials, 2012, ISSN 0167-6636, DOI http://dx.doi.org/10.1016/j.mechmat.2012.04.010, Volume 52, Pages 69–77, [BibTeX]
  
  
• R. Transchel, C. Dold, M. Rabiey, K. Wegener, Relevance of laser touch-dressed diamond tools for the dressing performance of vitrified-bonded silicon carbide, International Journal of Abrasive Technology, 2012, ISSN 1752-2641, 1752-265X, DOI 10.1504/IJAT.2012.046828, Volume 5, Issue 1, Pages 48--61, [BibTeX][Abstract]
  
  
• E. Weingärtner, R. Roth, F. Kuster, M. Boccadoro, F. Fiebelkorn, Electrical discharge dressing and its influence on metal bonded diamond wheels, CIRP Annals - Manufacturing Technology, 2012, Hong Kong, ISSN 0007-8506, DOI http://dx.doi.org/10.1016/j.cirp.2012.03.049, Volume 61, Issue 1, Pages 183-186, [BibTeX][Abstract]
  
  
• N. Jufer, D. Politze, J. Bathelt, A. Kunz, Performance Factory - A New Approach of Performance Assessment for the Factory of the Future, Estonian Journal of Engineering, 2012, Tallinn, Estonia, ISBN 1736-6038, ISSN 1736-7522, DOI 10.3176/eng.2012.1.04, Volume 18, Issue 1, Pages 42--57, [BibTeX][Abstract][Paper]
  
  
• W. Knapp, S. Ibaraki,, Indirect Measurement of Volumetric Accuracy for Three-Axis and Five-Axis Machine Tools: A Review, International Journal of Automation Technology Vol.6 No.2, 2012, p.110-124, 2012, Japan, [BibTeX]
  
  
• D. Politze, S. Dierssen, K. Wegener, Function module drivers for assessing the similarity between product functions, CIRP Journal of Manufacturing Science and Technology, 2012, ISSN 1755-5817, DOI http://dx.doi.org/10.1016/j.cirpj.2011.11.001, Volume 5, Issue 1, Pages 33--40), [BibTeX][Abstract]
  
  
• S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Microstructure, residual stresses and shear strength of diamond–steel-joints brazed with a Cu–Sn-based active filler alloy, International Journal of Refractory Metals and Hard Materials, 2012, ISSN 0263-4368, DOI 10.1016/j.ijrmhm.2011.06.006, Volume 30, Issue 1, Pages 16--24, [BibTeX][Abstract]
  
  
• E. Weingärtner, K. Wegener, F. Kuster, Wire electrical discharge machining applied to high-speed rotating workpieces, Journal of Materials Processing Technology, 2012, ISSN 0924-0136, DOI 10.1016/j.jmatprotec.2012.01.005, Volume 212, Issue 6, Pages 1298-1304, [BibTeX][Abstract]
  
  
• V. Wessels, A. Grigoryev, C. Dold, C. Wyen, R. Roth, E. Weingärtner, F. Pude, K. Wegener, J. Löffler, Abrasive waterjet machining of 3D structures from bulk metallic glasses and comparison with other techniques, Journal of Materials Research, 2011, [BibTeX]
  
  
• G. Reinhart, E. Genc, A. Hauptvogel, G. Heinecke, S. Lamparter, M. Ostgathe, Absicherung von Produktions- und Logistikprozessen in komplexen automobilen Wertschöpfungsnetzwerken, ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2011, Germany, ISSN 0947-0085, Volume 12/2011, Pages 963-968, [BibTeX][Abstract]
  
  
• A. Kunz, T. Nescher, Future Entertainment Technologies, ACM Computers in Entertainment, 2011, ISSN 1544-3574, DOI 10.1145/2027456.2027457, Volume 9, Issue 3, Pages 11.1--11.4, [BibTeX][Abstract][Paper]
  
  
• A. Spierings, N. Herres, G. Levy, Influence of the particle size distribution on surface quality and mechanical properties in additive manufactured stainless steel parts, The international journal for research on additive manufacturing technologies and rapid product development, 2011, USA, ISSN 1355-2546, DOI 10.1108/13552541111124770, Volume 17, Issue 3, Pages 195--202, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, Human-Computer Interaction on Tabletops, The SBC Journal on 3D Interactive Systems, 2011, Porto Alegre, Brazil, ISSN 2236-3297, DOI 10.3929/ethz-a-006699449, Volume 2, Issue 2, Pages 44--47, [BibTeX][Abstract][Paper]
  
  
• C. Wyen, W. Knapp, K. Wegener, A new method for the characterisation of rounded cutting edges, International Journal of Advanced Manufacturing Technology, 2011, Pages DOI: 10.1007/s00170-011-3555/4, [BibTeX]
  
  
• M. Rabiey, C. Dold, R. Transchel, K. Wegener, Influence of picosecond laser touch dressing of electroplated diamond wheels on the dressing of SiC vitrified bond wheel, Advanced Material Research - Advances in Abrasive Technology XIV, 2011, ISSN 1022-6680, 1662-8985, DOI 10.4028/www.scientific.net/AMR.325.189, Volume 325, Pages 189--194, [BibTeX][Abstract][Paper]
  
  
• K. Wegener, H. Hoffmeister, B. Karpuschewski, W. Hahmann, F. Kuster, M. Rabiey, Conditioning and Monitoring of Grinding Wheels, CIRP Annals 2011, Vol.60/2/2011, P.757, 2011, Budapest, Hungary, DOI 10.1016/j.cirp.2011.05.003, Volume 60, Issue 2, Pages 757--777, [BibTeX][Abstract]
  
  
• R. Hufenus, F. Reifler, K. Maniura-Weber, A. Spierings, M. Zinn, Biodegradable Bicomponent Fibers from Renewable Sources: Melt-Spinning of Poly(lactic acid) and Poly[(3-hydroxybutyrate)-co-(3-hydroxyvalerate)], Macromolecular Materials and Engineering, 2011, Weinheim, Germany, ISSN 1439-2054, DOI 10.1002/mame.201100063, Volume in press, [BibTeX][Abstract]
  
  
• A. Spierings, M. Schneider,, R. Eggenberger,, Comparison of Density Measurement Techniques for Additive Manufactured metallic Parts, Rapid Prototyping Journal, 2011, USA, ISSN 1355-2546, Volume 5, Issue 17, [BibTeX][Abstract]
  
  
• C. Dold, R. Transchel, M. Rabiey, P. Langenstein, C. Jaeger, F. Pude, F. Kuster, K. Wegener, A study on laser touch dressing of electroplated diamond wheels using pulsed picosecond laser sources, CIRP Annals - Manufacturing Technology (2011), 2011, ISSN 0007-8506, 0007-8506, DOI 10.1016/j.cirp.2011.03.117, Volume 60, Issue 1, Pages 363--366, [BibTeX][Abstract]
  
  
• T. Nescher, A. Kunz, An interactive whiteboard for immersive telecollaboration, The Visual Computer: International Journal of Computer Graphics, 2011, ISSN 0178-2789, DOI 10.1007/s00371-011-0546-2, Volume 27, Issue 4, Pages 311--320, [BibTeX][Abstract][Paper]
  
  
• N. Rüttimann, S. Buhl, K. Wegener, Simulation of Single Grain Cutting Using SPH Method, Journal of Machine Engineering, 2011, Poland, Volume 10, Issue 3, Pages 17--29, [BibTeX]
  
  
• A. Spierings, G. Levy, Rapid Manufacturing - auch mit SLM, RTejournal, 2010, Germany, ISSN 1614-0923, Pages 1294--1300, [BibTeX][Abstract]
  
  
• A. Ritter, S. Affolter, M. Schmid, Determination of molecular weights by size exclusion chromatography (SEC) – Results of round robin tests, Polymer Testing, 2010, [BibTeX][Paper]
  
  
• S. Buhl, C. Leinenbach, R. Spolenak, K. Wegener, Influence of the brazing parameters on microstructure, residual stresses and shear strength of diamond-metal joints, Journal of Materials Science, 2010, DOI 10.1007/s10853-010-4260-7, Volume 45, Issue 16, Pages 4358--4368, [BibTeX][Abstract]
  
  
• D. Kono, T. Lorenzer, S. Weikert, K. Wegener, Evaluation of modelling approaches for machine tool design, Precision Engineering, 2010, DOI 10.1016/j.precisioneng.2009.09.003, Volume 34, Issue 3, Pages 399--407, [BibTeX][Abstract]
  
  
• E. Weingärtner, S. Jaumann, F. Kuster, K. Wegener, On-machine wire electrical discharge dressing (WEDD) of metal-bonded grinding wheels, The International Journal of Advanced Manufacturing Technology, 2010, ISSN 0268-3768, Volume 49, Issue 9-12, Pages 1001--1007, [BibTeX][Abstract]
  
  
• T. Liebrich, W. Knapp, New concept of a 3D-probing system for micro-components, CIRP Annals - Manufacturing Technology, 2010, DOI http://dx.doi.org/10.1016/j.cirp.2010.03.036, Volume 59, Issue 1, Pages 513--516, [BibTeX][Abstract][Paper]
  
  
• C. Leinenbach, H. Schindler, T. Baser, N. Rüttimann, K. Wegener, Quasistatic fracture behaviour and defect assessment of brazed soft martensitic stainless steel joints, Engineering Failure Analysis, 2010, ISSN 1350-6307, Volume 17, Pages 672--682, [BibTeX][Abstract][Paper]
  
  
• E. Brinksmeier,, G. Levy, D. Meyer,, A. Spierings, Surface Integrity of Selective-Laser-Melted Components, CIRP Annals Manufacturing Technology, 2010, France, DOI 10.1016 /j.cirp.2010.03.131, Volume 59, Issue 1, Pages 601--606, [BibTeX][Abstract]
  
  
• E. Weingärtner, S. Jaumann, F. Kuster, M. Boccadoro, Special wire guide for on-machine wire electrical discharge dressing of metal bonded grinding wheels, CIRP Annals - Manufacturing Technology, 2010, Pisa, Italy, Volume 59, Issue 1, Pages 227-230, [BibTeX][Abstract]
  
  
• F. Klocke, A. Klink, M. Henerichs, ELID dressing behaviour of fine grained bronze bonded diamond grinding wheels, International Journal of Abrasive Technology, 2009, ISSN 1752-2641; 1752-265X, Volume 2, Issue 4, Pages 358-367, [BibTeX][Abstract][Paper]
  
  
• E. Constanza, A. Kunz, M. Fjeld, Mixed Reality: A Survey, Lecture Notes in Computer Science - Human Machine Interaction - Research Results of the MMI Program, 2009, Berlin / Heidelberg, Germany, ISBN 978-3-642-00436-0, DOI 10.1007/978-3-642-00437-7_3, Volume 5440, Pages 47--68, [BibTeX][Abstract][Paper]
  
  
• T. Liebrich, W. Knapp, K. Wegener, Calibration of a 3D-ball plate, Precision Engineering, 2009, Volume 33, Issue 1, Pages 1-6, [BibTeX][Abstract]
  
  
• T. Lorenzer, S. Weikert, K. Wegener, S. Bossoni, Modeling and evaluation tool for supporting decisions on the design of reconfigurable machine tools, Journal of Manufacturing Systems, 2008, [BibTeX][Abstract]
  
  
• F. Pinto, G. Vargas Evangelista, K. Wegener, Simulation for Optimizing Grain Pattern on Engineered Grinding Tools, Annals of the CIRP, 2008, ISSN 0007-8506, Volume 57, Issue 1, Pages 353--356, [BibTeX][Abstract]
  
  
• G. Vargas Evangelista, K. Wegener, F. Kuster, T. Schnider, Analysis and optimization of the hard broaching process with diamond tools, International Journal on Mechatronics and Manufacturing Systems, 2008, ISSN 1753-1039, Volume 1, Issue 4, Pages 365--376, [BibTeX][Abstract]
  
  
• F. Amado, R. Jorge, J. Maria, V. Yolanda, G. Luis, Elastic tensor stiffness coefficients for SLS Nylon 12 under different degrees of densification as measured by ultrasonic technique, Rapid Prototyping Journal, 2008, ISSN 1355-2546, DOI 10.1108/13552540810907929, Volume 14, Issue 5, Pages 260-270, [BibTeX][Paper]
  
  
• R. Neugebauer,, B. Denkena, K. Wegener, Mechatronic Systems for Machine Tools, Annals of the CIRP, 2007, ISSN 00078506, DOI 10.1016/j.cirp.2007.10.007, Volume 56, Issue 2, Pages 657--686, [BibTeX][Abstract][Paper]
  
  
• C. Ganser Schwab, T. Kennel, A. Kunz, Digital support for net-based teamwork in early design stages, Journal of Design Research, 2007, USA, ISSN 1748-3050, DOI 10.1504/JDR.2007.015567, Volume 6, Issue 1/2, Pages 150--168, [BibTeX][Abstract][Paper]
  
  
• A. Jönsson, J. Bathelt, G. Broman, Implications of modelling one-dimensional impact by using a spring and damper element, Proceeding of IMechE, 2005, ISSN 1464-4193, Volume 219, Issue 5, Pages 299--305, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, T. Kennel, A. Mazzone, S. Müller, Workplace to support the teamwork in the early stages of the product development process, Mécanique et Industries, 2004, Switzerland, ISSN 1296-2139, DOI 10.1051/meca:2004019, Volume 5, Issue 2, Pages 181--187, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, C. Spagno, Construction of a three-sided immersive telecollaboration system, Presence: Teleoperators & Virtual Environments, 2004, USA, ISSN 1054-7460, DOI 10.1162/1054746041382410, Volume 13, Issue 2, Pages 178--192, [BibTeX][Abstract][Paper]
  
  
• A. Kunz, S. Müller, Einsatz der Informationstechnologie in der FMEA, Konstruktion - Zeitschrift für Produktentwicklung, 2000, ISBN 0005-5953, DOI 10.3929/ethz-a-006054820, Volume 52, Issue 9, Pages 67--70, [BibTeX][Abstract][Paper]
  
  
• M. Schmid, CAD/CAM system designs goldsmith's components, Technica, 1990, ISSN 0184-4067, Volume 38, Issue 22, Pages 40--43, [BibTeX][Abstract]